RDINSCOS RD600 EMF Meter User Manual

1. પરિચય

The RDINSCOS RD600 EMF Meter is a portable device designed to detect electromagnetic field (EMF) radiation. It measures three types of EMF pollution: AC magnetic fields, AC electric fields, and RF/microwave fields. This manual provides essential information for the safe and effective use of your device.

The device features an LCD display for clear readings and an automatic sound-light alarm to indicate radiation levels above a safe threshold. Its compact design makes it suitable for various environments, including homes, offices, and outdoor settings.

2. સલામતી માહિતી

• ઉપકરણને ડિસએસેમ્બલ અથવા સંશોધિત કરવાનો પ્રયાસ કરશો નહીં.
• ઉપકરણને પાણી અને અતિશય તાપમાનથી દૂર રાખો.
• Use only the provided charging cable or a compatible USB Type-C cable.
• ઉપકરણને છોડવાનું ટાળો અથવા તેને મજબૂત અસરોને આધિન કરો.
• The device contains a Lithium Polymer battery. Do not expose it to fire or high heat.

3. ઉત્પાદન ઓવરview

The RDINSCOS RD600 EMF Meter is a compact, hand-held device with an intuitive interface. It is designed for ease of use and portability.

Figure 1: The RDINSCOS RD600 EMF Meter, showcasing its compact design, digital LCD display, and included accessories like the charging cable and lanyard.

પેકેજ સામગ્રી:

• RDINSCOS RD600 EMF Meter
• યુએસબી ટાઇપ-સી ચાર્જિંગ કેબલ
• વપરાશકર્તા માર્ગદર્શિકા

Figure 2: The complete packing list for the RDINSCOS RD600 EMF Meter, showing the device, user manual, charging cable, and packaging.

4. સેટઅપ

4.1 ઉપકરણને ચાર્જ કરવું

The RDINSCOS RD600 EMF Meter is equipped with a built-in 320mAh lithium battery. Before initial use, ensure the device is fully charged.

• Connect the provided USB Type-C charging cable to the device's charging port.
• Plug the other end of the cable into a standard USB power adapter (not included) or a computer's USB port.
• The battery indicator on the LCD display will show charging status.
• સંપૂર્ણ ચાર્જ થવામાં સામાન્ય રીતે થોડા કલાકો લાગે છે.

Figure 3: The RDINSCOS RD600 EMF Meter being charged via its USB Type-C port, connected to a laptop.

4.2 પાવરિંગ ચાલુ/બંધ

• To power on: Press and hold the power button (usually the central button below the screen) for a few seconds until the LCD screen illuminates.
• To power off: Press and hold the power button again until the screen turns off. The device will also auto-shut down after five minutes of inactivity to conserve battery.

5. ઓપરેટિંગ સૂચનાઓ

5.1 મૂળભૂત કામગીરી

Once powered on, the device will immediately begin detecting EMF levels. The LCD screen displays readings for AC electric (E), AC magnetic (H), and RF/microwave fields.

• Hold the device in your hand and slowly move it around the area you wish to test.
• Observe the readings on the LCD screen.
• The device features an automatic sound-light alarm. If radiation levels exceed safe values (40 V/m or 0.4 μT/4 mG or 5 mW/㎡), the alarm will activate, and the screen will indicate 'Harmful' in red.

5.2 ડિસ્પ્લેને સમજવું

The LCD display shows real-time values for:

• E-Field (Electric Field): Measured in V/m (Volts per meter).
• H-Field (Magnetic Field): Measured in μT (microTesla) or mG (milliGauss).
• RF/Microwave: Measured in mW/㎡ (milliWatts per square meter).

The device will indicate 'Safe' (green) or 'Harmful' (red) based on preset thresholds for these fields.

6. અરજીઓ

The RDINSCOS RD600 EMF Meter can be used to assess electromagnetic radiation in various environments and from different sources.

• ઘરની તપાસ: Check appliances like microwave ovens, refrigerators, televisions, and Wi-Fi routers.
• ઓફિસ વાતાવરણ: Monitor radiation from computers, monitors, power strips, and other electronic equipment.
• આઉટડોર ઉપયોગ: Detect EMF levels near power lines, cell towers, and other external sources.

Figure 4: The EMF meter detecting radiation from a microwave oven, showing the device's capability to identify potential sources of EMF.

Figure 5: The compact and portable design of the RDINSCOS RD600 EMF Meter, making it easy to carry for on-the-go measurements.

Understanding EMF levels can help users make informed decisions about device placement and usage to minimize exposure.

7. જાળવણી

7.1 સફાઈ

• નરમ, સૂકા કપડાથી ઉપકરણને સાફ કરો.
• ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.

7.2 સંગ્રહ

• સીધા સૂર્યપ્રકાશથી દૂર ઠંડી, સૂકી જગ્યાએ ઉપકરણને સંગ્રહિત કરો.
• If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to maintain battery health.

7.3 બેટરી કેર

• વારંવાર બેટરી સંપૂર્ણપણે ડિસ્ચાર્જ કરવાનું ટાળો.
• આત્યંતિક તાપમાને બેટરીને ખુલ્લી પાડશો નહીં.

8. મુશ્કેલીનિવારણ

• ઉપકરણ ચાલુ થતું નથી: Ensure the battery is charged. Connect to a power source using the USB Type-C cable.
• કોઈ રીડિંગ્સ પ્રદર્શિત થયા નથી: Check if the device is powered on. Ensure the sensors are not covered by your hand or other objects.
• અચોક્કસ વાંચન: Ensure the device is held steadily and moved slowly. Avoid testing in areas with known strong interference unless specifically measuring those sources.
• એલાર્મ સતત સક્રિય: Move away from the detected EMF source until readings return to safe levels.

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

RDINSCOS is committed to providing quality and reliable products. As a factory-direct seller, we stand by the performance of our EMF meters.

If you have any questions, encounter issues with your RDINSCOS RD600 EMF Meter, or require technical assistance, please do not hesitate to contact our customer support. We are happy to help you.