GRIN TECHNOLOGIES All Axle V3 Front Hub Motor
Specifications
- Product Name: Grin All-Axle V3 Front Hub Motor
- Weight: ~4.0kg
- Material: Anodized Aluminum
- Surface Finish: N/A
- Scale: 1:2
- Dishing Offset: 6mm (for most configurations)
Product Usage Instructions
15×100 Thru Axle Adapters:
These adapters are designed for a 15×100 thru-axle configuration. Follow the steps below for installation:
- Remove the existing front hub motor.
- Insert the 15×100 thru-axle adapters into the fork dropouts.
- Secure the adapters in place using the appropriate hardware.
- Install the Grin All-Axle V3 Front Hub Motor onto the adapters.
15×110 Boost Adapters – Even Spacing:
These adapters are suitable for a 15×110 Boost configuration with even spacing. Here’s how to install them:
- Prepare the fork for the Boost setup.
- Attach the 15×110 Boost adapters to the fork dropouts ensuring even spacing on both sides.
- Mount the Grin All-Axle V3 Front Hub Motor onto the adapters securely.
15×110 Boost Adapters – Offset Spacing:
If you have a 15×110 Boost setup with offset spacing, these adapters are ideal. Follow these steps for installation:
- Adjust the fork to accommodate the offset spacing.
- Fix the 15×110 Boost adapters onto the fork dropouts with the correct offset alignment.
- Install the Grin All-Axle V3 Front Hub Motor onto the adapters with proper alignment.
Installation
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: 100mm Quick Release Adapters
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external use Designed, Drawn and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERANCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: 15×100 Thru Axle Adapters
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external useDesigned, Drawn, and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERENCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: 15×110 Boost Adapters, -Even Spacing
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external use Designed, Drawn and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERENCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: 15×110 Boost Adapters – Offset Spacing
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external use Designed, Drawn and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERENCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: 135mm Quick Release Adapters
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external use Designed, Drawn and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERENCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: 15×150 Thru Axle Adapters
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external use Designed, Drawn and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERENCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
- PART NO: Grin All-Axle V3 Front Hub Motor
- DESCRIPTION: Single Side Adapters
- REVISION: 0
- DRAWN: Justin L-E.
- DATE: 09-24-2024 www.ebikes.ca Relevant dimension drawing in mm for external use Designed, Drawn and Made in Canada
- MATERIAL: N/A
- WEIGHT: ~4.0kg
- SURFACE FINISH: Anodized Alum
- SCALE: 1:2
REFERENCE USE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF GRIN TECHNOLOGIES. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GRIN TECHNOLOGIES IS PROHIBITED.
Frequently Asked Questions
Q: Can I use these adapters with any front hub motor?
A: These adapters are specifically designed for use with the Grin All-Axle V3 Front Hub Motor. Compatibility with other models may vary.
Q: What is the purpose of the dishing offset?
A: The dishing offset helps in aligning the front hub motor correctly within the fork dropouts for optimal performance and stability.
Documents / Resources
 |
GRIN TECHNOLOGIES All Axle V3 Front Hub Motor [pdf] Instruction Manual All Axle V3 Front Hub Motor, All Axle V3, Front Hub Motor, Hub Motor, Motor |
