GRANDSTREAM GRP261x Software User Guide

GRANDSTREAM GRP261x Software

USER GUIDE

GRP261x/GRP2624/GRP2634

Bluetooth is a wireless technology standard for exchanging data over short distances between fixed and mobile devices. The GRP Phones support Bluetooth, allowing users to connect to cellphones via hands-free mode or use a Bluetooth headset for making calls.

Please ensure your GRP phone is using the latest firmware.
Firmware release information can be found here.

SUPPORTED DEVICES

Table 1: Supported products

Model					Supported	Firmware
GRP2614					Yes	1.0.5.67+
GRP2615					Yes	1.0.5.67+
GRP2616					Yes	1.0.5.67+
GRP2624					Yes	1.0.5.67+
GRP2634					Yes	1.0.5.67+

OVERVIEW

Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances from fixed and mobile devices, creating personal area networks with high levels of security. GRP Phones supports Bluetooth. On the GRP phones, users could connect to cellphones (supporting Bluetooth) via hands free mode or use Bluetooth headset for making calls.
This document serves as an end user guide on how to use Bluetooth headset and hands-free mode on GRP2614.

Please ensure your GRP phone is using the latest firmware. The firmware release information can be found here: https://www.grandstream.com/support/firmware

BASIC FUNCTIONS

Bluetooth related settings are under GRP phone LCD Menu→System→Bluetooth. To connect to a Bluetooth device, turn on GRP phone Bluetooth power first. The first time when using a new Bluetooth device with the GRP phone, the device and the phone must be paired so that both devices know how to connect securely to each other. After that, users could simply connect to the paired device.

System —– Bluetooth
Bluetooth Status		Displays   the   status   of   Bluetooth.   When   “Power”   is   on,   the   status   is “Discoverable”; when Bluetooth power is off, the status is “Off”.
Bluetooth MAC		Displays the GRP phone’s MAC address.
Power		Configure Bluetooth to power on, off, or off with hiding menu from LCD.
Handsfree Mode		Enables/Disables Handsfree mode. Note:  By  enabling  the  handsfree  Mode,  the  user  can  sync  up  cellphone phonebook to the GRP phone and also via the cellphone account. Important: The GRP phone can connect to at most  one  handsfree device each time.
Bluetooth Name		Defines the GRP phone Bluetooth name.
Start Scan		Starts to scan other Bluetooth devices in range. If new device is found, user could  press  “Pair”  soft  key,  and  enter  Pin  code  to  pair  to  other  Bluetooth devices.

Turn Bluetooth ON or OFF

1. Go to GRP phone’s LCD MENU→System→Bluetooth
2. Highlight Power option by pressing Up/Down arrow key.
3. When the Power option is highlighted, pressing LEFT/RIGHT arrow keys to turn on/off Bluetooth.

Note: While Bluetooth is turned on, The GRP phone is discoverable by other Bluetooth devices. To make the phone undiscoverable, user needs to turn off Bluetooth.

Change GRP Phone Bluetooth Name

Under Bluetooth Name option, user can change the Bluetooth name of the GRP phone showed when discovered by other Bluetooth devices.

1. Go to GRP phone’s LCD MENU→System→Bluetooth.
2. Highlight Bluetooth Name option by pressing Up/Down arrow keys.
3. Enter the desired Bluetooth name from keypad.

Pairing to a Bluetooth device

Before connecting GRP phone with other Bluetooth device, users must pair them first. Both devices will stay paired afterwards unless they are unpaired.

1. Go to GRP phone’s LCD MENU→System→Bluetooth.
2. Enter Start Scan option
3. GRP phones scans and displays the names of all available Bluetooth devices.

Note: If the wanted device does not show up in the list, make sure the device is turned on and set to be discoverable. User can also press “Clear” and “Rescan” softkeys to restart the scanning.

4. The discovered devices will show up in the scan result list with devices names. If it is not paired, it will show the status “Unpaired” next to the device name. Select the wanted device, and press “Pair” softkey to pair it with the GRP Phone. Then a window will prompt up where the user can find a random PIN Code needed in the wanted device to pair it with the GRP Phone.

Connecting to a Bluetooth device

After successfully paired, the GRP phone will show the status “Paired” next to the Bluetooth device name in the scan list. select the paired device and press “Connect” softkey.
Once connected, GRP phone will show the status “Connected” next to the Bluetooth device name in the scan list.

Unpairing and disconnecting a Bluetooth device

In the Bluetooth settings, highlight the Bluetooth device name and press “Disconnect” softkey. Once disconnected/Unpaired, the phone will show the status “Disconnected/unpaired” next to the Bluetooth Device Name.

 

USE BLUETOOTH HEADSET

On GRP phone, user can answer/terminate incoming call from Bluetooth headset.

BT ON and BT OFF

After Bluetooth headset is successfully connected, the GRP phone will show “BT On” softkey on call screen. User may press it to active Bluetooth headset.

When “BT Off” softkey shows up in call screen and the Bluetooth icon on status bar changes to be solid, it means the Bluetooth headset is ready to use.

When BT is on, both Bluetooth headset and GRP phone will alert for incoming calls. User may answer using the button on Bluetooth headset.
During an active call, user may switch the audio channel between Bluetooth headset and phone handset by pressing “BT Off”/”BT On” softkey.

Specifications

• Supported Devices: GRP2614, GRP2615, GRP2616, GRP2624, GRP2634
• Supported Firmware: 1.0.5.67+

FAQ

Q: How can I update the firmware of my GRP phone?

A: You can find firmware release information and instructions on updating firmware here.