GCC601X Converged VPN Router

Product Information

Specifications

  • Network Ports: 2 x 2.5 Gigabit SFP ports and 5
    x Gigabit Ethernet ports
  • Auxiliary Ports: 1x Micro-SD, 1x USB 3.0, 1x
    Reset
  • Memory: 2GB RAM, 32GB eMMC Flash
  • External Storage: N/A
  • Router IPsec VPN Throughput: 2.5Gbps
  • NAT Sessions: 160K
  • IDS/IPS: 900Mbps
  • PBX: 12 users and 4 concurrent calls by
    default. Upgrades available for purchase.
  • Mounting: Desktop/Wall-mounting
  • LEDs: 7 x single LEDs and 1 x RGB LED for
    device tracking and status indication
  • Connection Type: DHCP, Static IP, PPPoE, PPTP,
    L2TP
  • Network Protocols: IPv4, IPv6, IEEE802.1Q,
    IEEE802.1p, IEEE802.1x, IEEE802.3, IEEE 802.3u, IEEE 802.3x,
    IEEE802.3ab
  • QoS: VLAN, TOS Support multiple traffic
    classes, filter by port, IP address, DSCP, and policing
  • Firewall: DDNS, Port Forwarding, DMZ, UPnP,
    DoS & Spoofing defense, traffic rules, NAT, ALG DPI,
    Anti-Virus, IPS/IDS, SSL deep inspection
  • VPN: Content Control: DNS Filtering, Web
    url/class/content filtering, Application identification and
    control
  • Network Management: GDMS, Local Web GUI, CLI
    (Console, Telnet) and SNMP (v1/v2c/v3)
  • Power and Green Energy Efficiency: Universal
    power adaptor included: Input 100-240VAC 50-60Hz Output: 48VDC 1A
    (48W); 4 x PoE out ports IEEE802.3af/at Max. PoE Wattage: 36W
  • Physical: Unit Dimension: 191x101x29mm; Unit
    Weight: 520g; Entire Package Dimension: 300x130x53mm; Entire
    Package Weight: 835g

Product Usage Instructions

Installation and Setup

  1. Choose a suitable location for the device that allows proper
    ventilation.
  2. Connect the necessary network and power cables to the
    appropriate ports.
  3. Power on the device using the provided universal power
    adaptor.
  4. Access the device’s configuration interface using a web browser
    or through CLI for advanced settings.

Configuration

Configure network settings such as IP addressing, DHCP or static
IP assignment based on your network requirements.

Security Setup

Set up firewall rules, VPN configurations, and enable security
features like DoS & Spoofing defense to protect your
network.

Advanced Features

Explore advanced features like QoS settings for traffic
prioritization and network management options via GDMS or SNMP.

Maintenance

Regularly check for firmware updates and apply them to ensure
optimal performance and security of the device.

Frequently Asked Questions (FAQ)

Q: How many concurrent calls does the default PBX support?

A: The default PBX supports 4 concurrent calls; however,
upgrades are available for additional capacity.

Q: What Wi-Fi standards are supported in the GCC6010W
model?

A: The GCC6010W model supports IEEE 802.11 a/b/g/n/ac/ax
standards.

Q: What is the maximum TX power for the GCC6010W model?

A: The maximum TX power for the GCC6010W model is 25.5dBm for 5G
and 24dBm for 2.4G frequencies.

“`

Grandstream Networks, Inc.
GCC601X User Manual

GCC601X – User Manual
GCC601X(W) series are defined as mid-range all-in-one convergence devices. Integrates VPN Router, NGFW, Switch or Wi-Fi AP, and IP PBX, covering the collaborative office capabilities of data communication and UC audio and video service. Featuring GbE RJ-45 and SFP ports, it enables high-speed multi-WAN port connectivity for enterprises. This series is convenient and fast to deploy and manage through the local simple Web UI, GDMS, mobile APP, or console. Support unified management and centralized control of Grandstream terminal devices including APs, Switches, and UC endpoints. It is also a security firewall that provides excellent performance and defenses against the most advanced network attacks while achieving unified management and consistent security in complex hybrid environments. Ideal for small and medium enterprises, campuses, government, hotels, remote offices/SOHO, etc.
The GCC601x(W) combines the following modules:
Home Networking Firewall Network Nodes PBX UC Endpoints

PRODUCT OVERVIEW

Technical Specifications
The following tables resume all the technical specifications including the hardware and the software specifications.

GCC6010 Technical Specifications

Network Ports Auxiliary Ports Memory External Storage Router IPsec VPN Throughput NAT Sessions IDS/IPS PBX

2 x 2.5 Gigabit SFP ports and 5 x Gigabit Ethernet ports *All ports are WAN/LAN con gurable, max 3 x WAN 1xMicro-SD, 1xUSB 3.0, 1xReset 2GB RAM, 32GB eMMC Flash N/A 2.5Gbps 1Gbps 160K 900Mbps 12 users and 4 concurrent calls by default. Upgrades available for purchase (See more for PBX capacity upgrade options).

Mounting Material LEDs Connection Type Network Protocols QoS
Firewall
VPN
Network Management Max AP/Clients Power and Green Energy E ciency
Environmental Physical

Desktop/Wall-mounting
Metal
7 x single LEDs and 1 x RGB LED for device tracking and status indication
DHCP, Static IP, PPPoE, PPTP, L2TP
IPv4, IPv6, IEEE802.1Q,IEEE 802.1p, IEEE802.1x, IEEE802.3, IEEE 802.3u, IEEE 802.3x,IEEE802.3ab
VLAN, TOS Support multiple tra c classes, lter by port, IP address, DSCP, and policing App QoS: Application/protocol monitoring and tra c statistics VoIP Prioritization
DDNS, Port Forwarding, DMZ, UPnP, DoS & Spoo ng defense, tra c rules, NAT, ALG DPI, Anti-Virus, IPS/IDS, SSL deep inspection Content Control: DNS Filtering, Web url/class/content ltering, Application identi cation and control
· IPsec VPN Client-to-Site / Site-to-Site · IPSec Encryption: 3DES, AES · IPSec Authentication: MD5, SHA-1, SHA2-256 · IPSec Key Exchange: Main/Aggressive Mode, Pre-shared Key, DH Groups 1/2/5/14 · IPSec Protocols: ESP · IPSec NAT Traversal · PPTP VPN Server / Client · PPTP Encrpytion: MPPE 40-bit, 128-bit · PPTP/L2TP Authentication: MS-CHAPv1/2 · L2TP Client-to-Site · OpenVPN® Server / Client · OpenVPN® Encryption: AES, DES · OpenVPN® Authentication: MD5, SHA-1, SHA2-256, SHA2-384, SHA2-512 · OpenVPN® Certi cate: RSA · WireGuard®
GDMS, Local Web GUI, CLI (Console, Telnet) and SNMP (v1/ v2c/v3)
Up to 150 GWN APs; Up to 500 Clients
Universal power adaptor included: Input 100-240VAC 50-60Hz Output: 48VDC 1A (48W); 4 x PoE out ports IEEE802.3af/at Max. PoE Wattage : 36W
Operation: 0°C to 45°C Storage: -30°C to 60°C Humidity: 5% to 95% Non-condensing
Unit Dimension: 191x 101 x 29mm Unit Weight: 520g Entire Package Dimension: 300 x 130 x 53 mm Entire Package Weight: 835g

Package Content Compliance

GCC6010/GCC6011, Universal Power Supply, Rack mount kit (Only GCC6011), Quick Installation Guide
FCC, CE, RCM, IC

GCC6010W Technical Specifications

Wi-Fi Standards

IEEE 802.11 a/b/g/n/ac/ax

Antennas

3 individual internal antennas ( 2 x dual band + 1 x Single band 5G) 2.4GHz: maximum gain 4.5dBi 5 GHz: maximum gain 5dBi

Wi-Fi Data Rates

5G: IEEE 802.11ax: 7.3 Mbps to 3603 Mbps IEEE 802.11ac: 6.5 Mbps to 2600 Mbps IEEE 802.11n: 6.5 Mbps to 450 Mbps IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 2.4G: IEEE 802.11ax: 7.3 Mbps to 573.5 Mbps IEEE 802.11n: 6.5 Mbps to 300 Mbps IEEE 802.11b: 1, 2, 5.5, 11 Mbps IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps *Actual throughput may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment and mix of devices in the network

Frequency Bands

2.4GHz radio: 2400 ­ 2483.5 MHz (2412-2472MHz are channel central frequency range; 2400-2483.5MHz is Frequency band) 5GHz radio: 5150 – 5895 MHz *Not all frequency bands can be used in all regions

Channel Bandwidth

2.4G: 20 and 40 MHz 5G: 20, 40, 80, 160 MHz

Wi-Fi and System Security

WPA/WPA2-PSK, WPA/WPA2 Enterprise (TKIP/AES); WPA3, anti-hacking secure boot and critical data/control lockdown via digital signatures, unique security certi cate and random default password per device

MU-MIMO

2×2 2G/3×3 5G

Maximum TX Power

5G: 25.5dBm 2.4G: 24dBm *Maximum power varies by country, frequency band and MCS rate

Receiver Sensitivity

2.4G 802.11b: -97dBm@1Mbps, -89dBm@11Mbps; 802.11g: -93dBm @6Mbps, -75dBm@54Mbps; 802.11n 20MHz: -73dBm @MCS7; 802.11n 40MHz: -70dBm @MCS7; 802.11ax 20MHz: -64dBm @ MCS11; 802.11ax 40MHz: -63dBm @MCS11 5G 802.11a: -93dBm @6Mbps, -75dBm @54Mbps; 802.11n: 20MHz: -73dBm @MCS7; 802.11n 40MHz: -70dBm @MCS7 802.11ac 20MHz: -70dBm@MCS8; 802.11ac: HT40:- 66dBm @MCS9; 802.11ac 80MHz: -62dBm @MCS9; 802.11ax 20MHz: -64dBm @ MCS11; 802.11ax 40MHz: -61dBm @MCS11;802.11ax 80MHz: -58dBm @MCS11

Network Ports Auxiliary Ports Memory External Storage Router IPsec VPN Throughput NAT Sessions IDS/IPS PBX Mounting Material LEDs Connection Type Network Protocols
QoS
Firewall
VPN

5 x Gigabit Ethernet ports
*All ports are WAN/LAN con gurable, max 3 x WAN
1xMicro-SD, 1xUSB 3.0, 1xReset
2GB RAM, 32GB eMMC Flash
N/A
3Gbps
1Gbps
160K
900Mbps
12 users and 4 concurrent calls by default Upgrades available for purchase (See more for PBX capacity upgrade options)
Desktop
Plastic Mini-Tower
9 x LEDs for device tracking and status indication
DHCP, Static IP, PPPoE, PPTP, L2TP
IPv4, IPv6, IEEE802.1Q,IEEE 802.1p, IEEE802.1x, IEEE802.3, IEEE 802.3u, IEEE 802.3x,IEEE802.3ab
VLAN, TOS Support multiple tra c classes, lter by port, IP address, DSCP, and policing App QoS: Application/protocol monitoring and tra c statistics VoIP Prioritization
DDNS, Port Forwarding, DMZ, UPnP, DoS & Spoo ng defense, tra c rules, NAT, ALG DPI, Anti-Virus, IPS/IDS, SSL deep inspection Content Control: DNS Filtering, Web url/class/content ltering, Application identi cation and control
IPsec VPN Client-to-Site / Site-to-Site · IPSec Encryption: 3DES, AES · IPSec Authentication: MD5, SHA-1, SHA2-256 · IPSec Key Exchange: Main/Aggressive Mode, Pre-shared Key, DH Groups 1/2/5/14 · IPSec Protocols: ESP · IPSec NAT Traversal · PPTP VPN Server / Client · PPTP Encrpytion: MPPE 40-bit, 128-bit · PPTP/L2TP Authentication: MS-CHAPv1/2 · L2TP Client-to-Site · OpenVPN® Server / Client · OpenVPN® Encryption: AES, DES · OpenVPN® Authentication: MD5, SHA-1, SHA2-256, SHA2-384, SHA2-512 · OpenVPN® Certi cate: RSA · WireGuard®

Network Management Max AP/Clients Power and Green Energy E ciency
Environmental
Physical
Package Content Compliance

GDMS, Local Web GUI, CLI (Console, Telnet) and SNMP (v1/v2c/v3)
Up to 150 GWN APs; Up to 500 Clients
Universal power adaptor included: Input 100-240VAC 50-60Hz Output: 48VDC 1A (48W) PoE: N/A
Operation: 0°C to 45°C Storage: -30°C to 60°C Humidity: 5% to 95% Non-condensing
Unit Dimension: 95 x 95 x 193 mm Unit Weight: 565g Entire Package Dimension: 186 x 127 x 105 mm Entire Package Weight: 920g
GCC6010W, Universal Power Supply, Quick Installation Guide
FCC, CE, RCM, IC

GCC6011 Technical Specifications

Network Ports Auxiliary Ports Memory External Storage Router IPsec VPN Throughput NAT Sessions IDS/IPS PBX Mounting Material LEDs Connection Type Network Protocols

2 x 2.5 Gigabit SFP port and 10 x Gigabit Ethernet ports *Fixed 3 x WAN 1xMicro-SD, 1xUSB 3.0, 1xReset 2GB RAM, 32GB eMMC Flash Optional, up to 1T M.2 SSD 2.5Gbps 1Gbps 160K 900Mbps 12 users and 4 concurrent calls by default Upgrades available for purchase (See more for PBX capacity upgrade options) Desktop/Wall/Rack-mounting Metal 12 x single LEDs and 1 x RGB LED for device tracking and status indication DHCP, Static IP, PPPoE, PPTP, L2TP IPv4, IPv6, IEEE802.1Q,IEEE 802.1p, IEEE802.1x, IEEE802.3, IEEE 802.3u, IEEE 802.3x,IEEE802.3ab

QoS Firewall
VPN
Network Management Max AP/Clients Power and Green Energy E ciency Environmental Physical Package Content Compliance

VLAN, TOS Support multiple tra c classes, lter by port, IP address, DSCP, and policing App QoS: Application/protocol monitoring and tra c statistics VoIP Prioritization
DDNS, Port Forwarding, DMZ, UPnP, DoS & Spoo ng defense, tra c rules, NAT, ALG DPI, Anti-Virus, IPS/IDS, SSL deep inspection Content Control: DNS Filtering, Web url/class/content ltering, Application identi cation and control
· IPsec VPN Client-to-Site / Site-to-Site · IPSec Encryption: 3DES, AES · IPSec Authentication: MD5, SHA-1, SHA2-256 · IPSec Key Exchange: Main/Aggressive Mode, Pre-shared Key, DH Groups 1/2/5/14 · IPSec Protocols: ESP · IPSec NAT Traversal · PPTP VPN Server / Client · PPTP Encrpytion: MPPE 40-bit, 128-bit · PPTP/L2TP Authentication: MS-CHAPv1/2 · L2TP Client-to-Site · OpenVPN® Server / Client · OpenVPN® Encryption: AES, DES · OpenVPN® Authentication: MD5, SHA-1, SHA2-256, SHA2-384, SHA2-512 · OpenVPN® Certi cate: RSA · WireGuard®
GDMS, Local Web GUI, CLI (Console, Telnet) and SNMP (v1/ v2c/v3)
Up to 150 GWN APs; Up to 500 Clients
Universal power adaptor included: Input 100-240VAC 50-60Hz Output: 48VDC 1A (48W) 4 x PoE out ports IEEE802.3af/at Max. PoE Wattage : 36W
Operation: 0°C to 45°C Storage: -30°C to 60°C Humidity: 5% to 95% Non-condensing
Unit Dimension: 280 x 180 x 44 mm Unit Weight: 1200g Entire Package Dimension: 366 x 211 x 53 mm Entire Package Weight: 1600g
GCC6010/GCC6011, Universal Power Supply, Rack mount kit (Only GCC6011), Quick Installation Guide
FCC, CE, RCM, IC

INSTALLATION
Before deploying and configuring the GCC601X(W) device, the device needs to be properly powered up and connected to the network. This section describes detailed information on the installation, connection, and warranty policy of the GCC601X(W) device.

Package Content

GCC601X(W) Power Adaptor Ethernet Cable Rack Mount Kit Simpli ed Quick Installation Guide SSD Installation Ground Cable Rubber footpads

1 1 With GCC6010W only. with GCC6011 only. 1 2x screws & 1x nut (GCC6011 only). with GCC6011 only. with GCC6010/GCC6011 only.

GCC6010/GCC6011 Package Content

GCC6010W Package Content

GCC6010/GCC6011 Package Content

GCC6010W Package Content
Note: Check the package before installation. If you find anything missing, contact your system administrator.
Connect Your GCC601X(W) Device
Safety Compliances The GCC601X(W) complies with FCC/CE and various safety standards. The GCC601X(W) power adapter is compliant with the UL standard. Use the universal power adapter provided with the GCC601X(W) package only. The manufacturer’s warranty does not cover damages to the device caused by unsupported power adapters.
Warranty If the GCC601X(W) device was purchased from a reseller, please contact the company where the device was purchased for replacement, repair, or refund. If the device was purchased directly from Grandstream, contact our Technical Support Team for an RMA (Return Materials Authorization) number before the product is returned. Grandstream reserves the right to remedy the warranty policy without prior notification.
Warning Use the power adapter provided with the GCC601X(W) device. Do not use a different power adapter as this may damage the device. This type of damage is not covered under warranty.
Connecting GCC601X

1

2.5G SFP Port

2

USB 3.0

3

Ethernet Port

4

DC48V

5

RESET

6

Micro SD

7

Ground Terminal

8

Kensington Lock

Connecting GCC6010W

1

LED Indicators

2

NET Ports

3

USB 3.0 Port

4

Micro SD

5

Sync APs Button

6

DC12V

7

RESET Button

1. GCC6010/GCC6011 can be powered on using the right PSU 48VDC 1A (48W) and GCC6010W can be powered by a 12VDC 1.5A power adapter.
2. Connect the WAN port to an optical fiber broadband modem, ADSL broadband modem.
3. Connect a PC, laptop to one of the LAN ports for GCC6010 and GCC6011, or connect to SSID (Wi-Fi) only for GCC6010W.

Notes:
The default password information is printed on the MAC label on the bottom of the unit. The default username is “admin”.
Ports with this symbol on GCC6010 are configured to be used as a WAN port by default at the factory.
The default gateway is 192.168.80.1 (gcc.grandstream.com).

HOME

GCC601x(W) login page

Overview
In this section, the user can view general information about the GCC60XX device. The information displayed includes basic information like the device name, hardware version, firmware version, MAC address, IP address, part number, serial number, boot version, uptime, and system time.
It also shows the firmware version of each module and whether a new firmware update for a module is detected.
In addition to that, it shows the general system performance of the device by displaying the CPU load rate, the storage performance rating, the percentage of the memory utilized.

GCC601X Overview Page
Topology
In this section, the administrator can view the topology of the Grandstream networking device connected to the GCC device.
Topology When clicking on the highlighted icon below, the user can view the device details and settings

Icon View
AP Settings To filter the types of devices that are shown on the topology click on

Topology Filter
System Settings
In this section, the user can configure settings related to the general operations of the device.
Basic Settings
Basic Settings
In this configuration tab, the user can define certain information about the GCC device. This includes device name, country/region, time zone, NTP server, and language.

Manager Server Settings

Basic Settings

Manager Server Settings
Security Settings
In this section, the user will be able to configure different security-related settings. These settings are mainly related to securing user access to the device either locally or remotely.
Account Settings
This tab allows the user to configure his/her username, password, email, and mobile phone number.
Account Settings
Web Access
On this page, the administrator can configure to allow or prevent web access through the WAN port. The administrator can also configure the HTTPS port number used for web access.

Web Access
SSH Access
In this section, the user can enable SSH remote access to the device, this includes SSH remote access as well.
SSH Access
Remote Access without Password
Enabling passwordless remote access allows you to access the device through the GDMS management platform without having to provide a username and password for authentication.
Remote Access without Password
Schedule
This feature allows the creation of schedules that can be applied as rules to various components of the GCC device. This includes the Wi-Fi-embedded controller. When the user creates a new schedule, this schedule can be used for, e.g., to determine when a Wi-Fi SSID is broadcasted and when it is not.

Schedule
User Management
User Management allows the user to create users with various roles and privileges.

User Information
In this section, the user can create new users by clicking on the

button.

User Information

Add User

Username Password Email Mobile Number Role

Enter the username. The username can consist of 4-64 characters, including letters, digits, and underscores.
Enter the password. The password can consist of 8-32 characters, need to contain 2 types of numbers/letters/special characters
Enter the email of the user. The email entered should be limited between 1-64 characters
Enter the mobile number of the user. The phone number is limited between 2-18 digits
Select the role of this user.
The role must be created rst, before it’s assigned to the user under

Role

In this section, the user can create roles that can be assigned to different users. By default, the SuperAdmin role is pre-created

and assigned to the default administrator account of the device. To create more roles, click on

button.

Note Please note that the SuperAdmin role cannot be assigned to other users. It’s an exclusive role for the default user of the device.

Role
Add role
Email Settings
Setting the email client on the GCC60XX device allows the device to send emails directly to users and administrators. For example, when an extension is created on the PBX module and the email is entered in the extension’s user information, the user will receive an email stating the information that he/she can use to log into his/her extension. The email feature is used to send emails for the following types of information:
Extension information Remote registration of an extension Wave welcome message Missed calls notifications Scheduled multimedia meetings Scheduled meeting reports Alert events Emergency calls Password reset emails
Email Settings
Configuring email settings on the GCC device allows the sending of notification emails. This deployment of a third-party SMTP server to transfer the emails to the configured email addresses.

TLS Email Template Sending Format SMTP Server
SASL Authentication Username Password Email To Fax

Email Settings
Toggle TLS On/Off
HTML: The emails will be sent in HTML format. Plain Text: The emails will be sent as plain text.
Enter the address of the SMTP server. The address can be either an IP address or a FQDN.
Enable Simple Authentication and Security Layer. When this option is disabled, the device will not try to use the username and password for mail client authentication. Most of the mail servers require authentication while some other private mail servers allow anonymous login, which requires disabling this option to send email as normal. For Microsoft Exchange Server, please disable this option.
Enter the username created for the SMTP client.
Enter the username created for the SMTP client.
Monitors the inbox of the con gured email address for the speci ed subject. If enabled, the IPPBX will get a copy of the attachment from the email and send it to the XXX extension by fax. The attachment must be in PDF/TIF/TIFF format.

Email-to-Fax Blacklist/Whitelist Email-to-Fax Subject Format Fax Sending Success/Failure Con rmation POP/POP3 Server Address/Port

The user can enable the Email-to-Fax Blacklist or Email-to-Fax Whitelist.
Select the email subject format to use for emails to fax. XXX refers to the extension that the fax will be sent to. This extension can only contain numbers.
Email address blacklist/whitelist for local extensions.
Con gure the POP/POP3 server address and port for the con gured username Example: pop.gmail.com

Display Name Sender

Specify the display name in the FROM header in the Email.
Specify the sender’s Email address. For example: pbx@example.mycompany.com.

Email Template
The user can customize the layout of the emails sent by the device to the various users. The device already provides a preconfigured layout that can be modified.

Email Template The user can click on the edit button to edit a specific template.

Edit Email Template The user can use the text editor to change the layout, once that is done, the user can view the new layout by clicking on
.
Email Footer Hyperlink
The customize the links that are included in the footers, please navigate to System Settings > Email Settings > Email Footer Hyperlink On the page, you can edit the text and the URL of each footer. You can add 3 additional footers if needed.
Email Footer Hyperlink

Email Send Log
Email send log is used to keep records of all the emails that have been sent from the GCC device.
Email Send Log
SMS Settings
The SMS feature allows the user to send information over SMS to mobile numbers. Currently, the information which can be sent over SMS are the following:
Profile Code: Verification Code: Alarm Notification:
SMS Settings

Twilio: Enable SMS SMS Carrier Username Auth Token Message Server ID From

SMS Settings
Toggle the slider to enable/disable SMS service. Select Twilio as the SMS Carrier. Enter the username of the account of the carrier. Enter the authentication token generated on the carrier’s site. Enter the ID of the message server of the carrier. Con gure the source number of the outgoing messages.

Amazon:

Enable SMS SMS Carrier Region

Toggle the button to enable/disable SMS feature.
Choose Amazon as the SMS carrier.
Choose your region.
US East (N. Virginia) US East (Ohio) US West (N. California) US West (Oregon) EU (Ireland) EU (London) EU (Paris) EU (Frankfurt) EU (Stockholm) EU (Milan) Asia Paci c (Hong Kong) Asia Paci c (Mumbai)

Asia Paci c (Singapore) Asia Paci c (Sydney) Asia Paci c (Jakarta) Asia Paci c (Tokyo) Asia Paci c (Seoul) Asia Paci c (Osaka) South America (Sao Paulo) China (Beijing) China (Ningxia) Canada (Central) Middle East (Bahrain) Middle East (UAE) Africa (Cape Town) AWS GovCloud (US-West) AWS GovCloud (US-East) US ISO East US ISOB East (Ohio) US ISO West

Username Password

Con gure your Amazon account ID. Con gure your Amazon account password.

SMS Template
In the “SMS Template” tab, the user can view and edit templates of the SMS messages sent by the GCC device.

SMS Template
SMS Delivery Log
The “SMS Delivery Log” tab displays information about all the SMS messages that have originated from the GCC device.

SMS Delivery Log
PBX Upgrades
On this page, the user can manage the various licenses which can be uploaded to the GCC device.

Maintenance

PBX Upgrades

Upgrade
When a new firmware is released for the GCC device, the user can use the “Upgrade” page to update the firmware of the GCC device using different methods of updating the firmware.
There are three methods of upgrading the firmware which are listed below.
Official Online Upgrade: This method allows upgrading directly from the Grandstream firmware server. The administrator can click “Detect New Version” to check for any new firmware releases. When a new firmware version is available, the administrator can proceed with upgrading the device.
Allow DHCP Options 43 and 66 to Override Server: If enabled, DHCP options 66 and 43 will override the upgrade and provisioning settings, if disabled, use the configured server path to request firmware information by default. Note: In the official online upgrade mode, “Detect New Version” uses the official default address, and this configuration does not take effect.
Check/Download New Firmware at Bootup: When it is turned on, firmware detection will be performed every time the device is started. If a new firmware version is detected, it will automatically download and upgrade. This option is disabled by default to prevent the device from updating upon booting.

Scheduled Upgrade: Specifies a specific schedule for the device to check for new firmwares and install them.
Upgrade via Network: Using this method, the user can choose a specific upgrade method and configure a server address that hosts the firmware files.
Upgrade via Manual Upload: Using this method, the user can upload the firmware file directly on the web UI of the device.

GCC Upgrade
Important When uploading the firmware image to the device, please ensure that you are using the correct firmware image. Before upgrading the firmware of the device, please perform a full backup of the configuration of the device to avoid any configuration loss after the upgrade.
Backup & Restore
On the “Backup & Restore” page, the user can back up the data of the GCC device. When backing up the data, the user can choose the data of the GCC modules to be backed up.

Factory Reset

Backup & Restore

On this page, the user can factory reset the GCC unit
Factory Reset
Notification Center
The Notification Center allows the user to view and configure notifications of the events that occur on the GCC device. To access the notification center, please access the main page of the GCC web UI and then click on the Notification Center tab.

Notification Settings

Notification Center

To set the notifications of the GCC device, click on

.

On this page, the user can enable notifications for certain events on the GCC. In addition to generating the notification on the web UI, the user can configure an email address to which email notifications are sent.

Note To use the email notification feature, please ensure that the Email Settings on the GCC are configured successfully.

Notification Settings
NETWORKING
The Networking module of GCC601X(W) includes network-related configuration mainly VPN, Multi-WAN, and traffic management. It also allows users to configure all the standard routing configurations such as VLAN, port forwarding, etc.
Click on the icon to access.
FIREWALL
The firewall module of GCC601X(W) is a Next-Generation Firewall (NGFW) that secures users’ network environment by providing defense against the most advanced network attacks as it supports anti-virus and intrusion prevention (IDS/IPS) with frequent signature library updates and also supports SSL proxy to filter HTTPS URL.
Click on the icon to access.
NETWORK NODES
Network nodes refer to individual devices or components such as switches and access points that form the interconnected infrastructure of the network. These nodes provide data points for analysis, which helps centralize the monitoring and configuration of the device performance, security, and overall network features. The GCC601X(W) offers an embedded controller for both the wireless access points and the GWN-managed network switches to provide the user with a global overview of his network infrastructure.
Click on the icon to access.

PBX
The integrated IPPBX module in the all-in-one convergence device the GCC601X(W) provides a communication and collaboration solution for enterprises that do not require expanded telephony capabilities. It offers the same features that are provided by Grandstream IPPBX solution, the UCM6300, to ensure cost-effective and efficient collaboration among professionals.
Click on the icon to access.
UC ENDPOINTS
The UC endpoints configuration module contains all the settings and tools to manage and control the unified communication endpoints, including devices ranging from IP phones, Video phones, and Wi-Fi phones, to security facility access devices such as the IP cameras and the door systems. The GCC601X(W) with its VoIP devices and IPC devices management modules offers a centralized way to manage, provision, and control all your on-premise UC endpoint devices.
Click on the icon to access.
CHANGE LOG
This section documents significant changes from previous versions of user manuals for GCC601x. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware version 1.0.1.34 (PBX version 1.0.25.21)
No major changes. Firmware version 1.0.1.32 (PBX version 1.0.25.17)
This is the initial version for GCC6010W and GCC6011. Firmware version 1.0.1.10 (PBX version 1.0.25.11)
Disabled Check/Download New Firmware at Boot up by default. [Upgrade] Firmware version 1.0.1.8 (PBX version 1.0.25.11)
This is the initial version.
Certification Regulatory Information U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
CAN ICES-003 (B)/NMB-003(B) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d’Innovation, Sciences et Développement économique Canada.
Need Support? Can’t find the answer you’re looking for? Don’t worry we’re here to help!
CONTACT SUPPORT

Documents / Resources

GRANDSTREAM GCC601X Converged VPN Router [pdf] User Manual
GCC6010, GCC6011, GCC601X Converged VPN Router, GCC601X, Converged VPN Router, VPN Router

References

Leave a comment

Your email address will not be published. Required fields are marked *