GRADA DC570 Perforated Ceiling Diffuser For Exhaust
TECHNICAL INFORMATION
| APPLICATION | Type | Exhaust |
| CONSTRUCTIE | Frontplate | Perforations Ø4,5mm, 51% free passage |
| Available nominal sizes | Ø125, 160, 200, 250, 315mm | |
| Available panel sizes | 594×594, 619x619mm | |
| MATERIAL | Standard material | Powder coated sheet steel |
| Standard finishing | Powder coating RAL9010 | |
| Product finishing options | Powder coating RAL of choice | |
| Plenum | Galvanised (275g/m²) sheet steel | |
| Aansluiting plenum | PP/TPE spigot, Class D spigot with double lip seal | |
| Optionele isolatie | Melamine 6mm | |
| MOUNTING | Montage opties | Suitable for modular T-bar ceiling system Plenum with side connection with mounting eyes (ø 7mm), mounting straps available upon request |
QUICK SELECTION
|
Exhaust Qv [m³/h] |
|||
| ØN [mm] | Lw | DC570_S | DC570_T |
| 125 | 25 dB(A) | 161 | 129 |
| 35 dB(A) | 227 | 178 | |
| 160 | 25 dB(A) | 252 | 200 |
| 35 dB(A | 364 | 280 | |
| 200 | 25 dB(A | 425 | 321 |
| 35 dB(A) | 612 | 461 | |
| 250 | 25 dB(A) | 539 | 454 |
| 35 dB(A) | 825 | 627 | |
| 315 | 25 dB(A) | 579 | 678 |
| 35 dB(A | 1013 | 1013 | |
PRODUCT KEY
DC570_S
DC570_T
DIMENSIONS
All dimensions in mm
| ØN | E | H | H1 | W’ | W” |
| 125 | 58 | 185 | 103 | 240 | 266 |
| 160 | 58 | 220 | 120 | 305 | 331 |
| 200 | 58 | 260 | 140 | 382 | 408 |
| 250 | 58 | 308 | 163 | 547 | 573 |
| 315 | 149 | 368 | 199 | 547 | 573 |
VARIANTS
DC570_S, DC570_T
The perforated diffuser is used for exhaust and visually identical to the supply type DC560. Specifically designed for installation in modular T-bar ceiling systems.
Visually identical to DC560
Suitable for modular T-bar ceilings
 |
 |
 |
 |
|
RECTANGULAR |
CEILING |
1 WAY THROW |
EXHAUST |
Documents / Resources
 |
GRADA DC570 Perforated Ceiling Diffuser For Exhaust [pdf] Owner's Manual DC570, DC570 Perforated Ceiling Diffuser For Exhaust, Perforated Ceiling Diffuser For Exhaust, Ceiling Diffuser For Exhaust, Diffuser For Exhaust, Exhaust |