GPS Tracker Mini GT06 Protocol Locator Smart Mini Tracking Device
Please view this manual carefully to make sure of correct installation and use.
Product Features
Terminal Description
Wiring instruction
| Color | Wiring | |
| Red | Positive (9-90V) | |
| Black | Negative | |
| Orange | ACC line | |
| Yellow | Relay |
Red LED light (Power Supply Status)
| Status | Meaning |
| Slow Blink | Normal (Internal Battery Supply) |
| Light | Normal(External Power Supply) |
| Off | Broken or Sleeping |
Yellow LED light (GSM Status)
| Status | Meaning |
| Quick Blink | Searching GSM Signal |
| Slow Blink | Normal Working |
| Off | GSMSearching Failedor Sleeping |
Blue LED light (GPS Status)
| Status | Meaning |
| Quick Blink | Searching GPS Signal |
| Slow Blink | Normal Working |
| Off | GPS Searching Failed or Sleeping |
Installation
- Red line connects the battery positive pole(+), black line connects the battery negative pole(-).
- The orange line connects the ACC line.
Wring for Cut-off oil function:
- Find the “Speed control line”.
- Detect the voltage of the “Speed control line” with a multimeter.
- Cut the “Speed control line” into two lines.
- Connect “Speed control lines” with the relay’s two green lines.
Note:
- Please use the appropriate relay, normally electric bike suit 5V relay, and car suit 12V relay. 2). Open the SIM card cover, insert the SIM card, and turn on the battery supply.
- SIM cards must have GPRS data and SMS service.
- Please Turn on the battery supply.
- Please make sure the LED lights up and no steel matter covers the device.
- Please fix it with cable ties or tape.
Start to Use
Log in Tracking Platform
- Please log in to http://www.gwgps12580.com/
- Default username: IEMI number
- Password: 123456
Download
Please download the CarHere APP
SMS Command
- Status Checking status#
- Setting SOS Number sos, a mobile number#
- Setting Center Number center, a mobile number#
- Note: Please ask the seller for an admin account if needed.
Working Description
- The device will start automatically when connected to external power, Red LED will be lit.
- When there is no external power, the Red LED will blink slowly.
- Yellow LED(GSM) and blue LED(GPS) will blink quickly when searching signal.
- When the device is working normally, the Yellow LED(GSM) and blue LED(GPS) will blink slowly.
Battery use safety
- Please don’t make a battery short circuit.
- Please bend or open the battery.
- Please don’t put the battery into water or fire.
Trouble Shooting
If the device not working normally, please refer to the following sheet. If the problem cannot be solved, please contact the device seller.
| Common Problem | Cause | Solution |
| Bad signal | The device is used in regions with poor telecom signals, such as tall buildings or basements. | Use it in regions with good telecom signal |
| Network connection failed | SIM card not installed correctly | Check SIM card |
| SIM card is dirt | Clear the SIM card | |
| No GSM signal | Go to the area covered with a GSM signal | |
| Weak signal | Go to the area with a strong signal | |
| Cannot check the location | SIM card has no GPRS function | Please top up the GPRS function |
| Location acquisition failed | Contact with the seller |
Documents / Resources
 |
GPS Tracker Mini GT06 Protocol Locator Smart Mini Tracking Device [pdf] Instructions Mini GT06 Protocol Locator Smart Mini Tracking Device, Mini GT06, Protocol Locator Smart Mini Tracking Device, Smart Mini Tracking Device, Tracking Device, Device |
