B&W Printed NFC Inlay
NTAG213 – 20 x 10 mm Rectangle
Instructions
- Place all artwork elements in the “Customer Artwork” parent layer
- Do not modify the template in any way
- All elements except for images should be vector graphics
- Use high-quality images of at least 300 dpi
- Embed images into the file; do not link images
- Lines should be 0.5 pt or thicker
- Do not include a line or a border around the artwork edge; it will not look good
- Convert text to outlines (unless it’s variable text); required if using non-standard fonts
- Text should generally be 7 pt or higher to be readable
- For variable elements (text, barcode) put an example (position, size, font…) in the “Variable Elements” layer
- Barcodes must have a border of white “quiet zone” in order to be scannable; black barcodes are best
- If PMS colors are used, include the PMS color code in the layer name
- Do not flatten layers before saving
- Edit and save the file in the existing CMYK color mode
- Save the file in the Adobe Illustrator file format (.ai) with “PDF Compatible” enabled
Print Lines
 |
Bleed: Extend the artwork background (if exists) to fill to the bleed line to prevent a white border at the edge. Do not place artwork elements within this area. |
 |
Trim: The area of the physical product; artwork outside this area will be trimmed off. |
 |
Safe: Keep all artwork elements (text, logos, icons…) inside this area to ensure it is printed. The background artwork (if exists) should extend to the bleed line. |
Additional Information
– GoToTags’s printing accuracy is ± 1.0 mm and is unable to guarantee jobs with a print tolerance less than ± 1.0 mm
For additional information about artwork and printing, visit the Store’s help site at:
https://learn.gototags.com
Documents / Resources
 |
GoToTags Custom NFC 20x10mm Rectangle Artwork Template [pdf] Instructions Custom NFC 20x10mm Rectangle Artwork Template, Rectangle Artwork Template, Artwork Template, Custom NFC 20x10mm Template, Template |
