Godox S60Bi LED Light Control Box Instruction Manual

Godox LED lights and associated products are professional
equipment and should only be operated by professionals. It is
crucial to read and understand the instruction manual thoroughly
before use to prevent accidents.

Important Safety Instructions:

This equipment is not waterproof; keep it dry and avoid
exposure to water or other liquids.

Install the equipment in a dry, ventilated place away from
rain, humidity, dust, or heat.
Avoid placing objects on the light or allowing liquids to enter
the light to prevent accidents.

Do not block the heat dissipation port; ensure the product is
completely cooled before packaging.
For battery-powered products, only use specified batteries,
power sources, and accessories as per the manual.

Keep batteries and accessories out of reach of children; seek
immediate medical attention if swallowed.

Product Usage Guidelines:

Connect the power source to the DC input or USB-C port based on
your setup.

Turn on the control box using the power button.
Adjust the color temperature using the MODE button and SET
button for fine-tuning.

Select different lighting effects using the FX mode and adjust
intensity using the SET button.
You can control the light settings via DMX by setting the
appropriate parameters.

For NFC functionality, use the Godox LightApp with NFC support
for Android and iOS devices.

Frequently Asked Questions (FAQ):

1. Can the Godox S60Bi LED light be used in wet
environments?

No, the equipment is not waterproof. Avoid using it in wet
conditions to prevent damage or accidents.

2. How can I adjust the color temperature of the light?

Use the MODE button to switch between different color
temperature presets and fine-tune using the SET button.

3. Is the Godox S60Bi suitable for professional use?

Yes, the Godox S60Bi LED light is designed for professional
applications and should be operated by professionals following
safety guidelines.

“`

View Fullscreen

Wechat Official Account 2 0755-296093208062 0755-25723423 godox@godox. com GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com www.godox.com Made in China | 705-S60BCB-00

S60Bi Godox S60Bi Control Box

Instruction Manual

V1.0 /Instruction Manual

V1.00 /Firmware

Godox LED

·
·
·
·
· 1
·
· · · 1. 2. 3. 4. 5. 6. 7. 8. 9.
1

· · ·
: CMIIT ID25J44811A025

S60Bi LED S60Bi V DMX
2

2 34 5

1. 2.MODE 3.MENU 4. 5.SET 6.

10 11

7. 8.DC 9. DMX 10.USB-C 11.DC 12.NFC

U
1 2
3 1.V 2. 3.
4

×1

U ×1

D-TAP DC ×1

2.DC DC 5

3. U

DMX
DMX DMX-C2, DMX DMX DMX
DMX512 DMX-C2
6

V 14.8V V D-TAP DC DC
20V USB-C

CCT
MODE CCT 0.0 100.0 2800K 6500K

MODE FX 11 SET

2800K-6500K 1-100

2800K-6500K ×

× 0.0 -100.0 2800K-6500K
× × × × 2800K-6500K

/1-100 1-100 1-100 1-100 1-100 1-100 1-100

SOS

2800K-6500K 1-100 2800K-6500K ×

/ / /1-10 /2-20 / 30%-90% × × × × 1-100 1-100 / × ×

SET M SET MODE 11
8

MENU SET MENU

DMX SET DMX SET
9

DMX
RDM DMX
DMX

001-512 01: CCT 8 Bit 02: FX 8 Bit 03: CCT 16 Bit 04: FX 16 Bit 05: ULTIMATE 8 Bit 06: ULTIMATE 16 Bit

8 CCT 8 FX 16 CCT 16 FX 8 ULTIMATE 16 ULTIMATE RDM DMX RDM DMX DMX DMX DMX DMX 2 2 2 DMX DMX DMX DMX

SET SET SET MAC

“Godox Light”app “Godox Light” app 1. app app 2.app V3.0
“Godox Light”app Godox Light +
SET /S / / SET

MCU MCU

SET / / SET

SET SET SET 1-11

SET / / / SET
SET SET 10%-100%
SET /English SET
SET
13

1. DMX DMX-C2 DMX 2. https://www.godox.com.cn/firmware-continuous-light U 3. U USB-A 4. MODE 5. U BIN
SET / SET English 100
SET
NFC
NFC NFC Godox lightApp 1 NFC Godox lightApp V3.2.4 NFC 2Godox light+NFC NFC NFC Android iOS NFC
14

USB-C DC FX

S60Bi-CB 20V 5A 12V-16.8V 6A 2800K 6500K 0.0% 100.0 /S / / 11 DMX/RDM 60m
-20 40 183mm*81mm*25mm 170g

Important Safety Instructions and Precautions
Godox LED lights, and products collocated with them, are professional equipment and should only be operated by professionals. Carefully read and fully understand the instruction manual before use and strictly follow the safety instructions. Failure to do so may result in death, serious injury, damage to the product, or other property damage.
Danger
· Do not use damaged product. Stop using immediately if the product shell is cracked due to falling, squeezing, or strong impact, to avoid touching the internal electronic components and getting an electric shock.
· Please use only the accessories recommended by our factory to avoid fire, electric shock or personal injury. If an extension cord is required, use the original extension cord or one recommended by the manufacturer (an extension cord with a current rating greater than or equal to that of the equipment). Extension cords rated at less than that of the equipment may cause fire, electric shock, other serious personal injury hazards, or property damage.
· Do not disassemble the product without permission. If the product malfunctions, it must be checked and repaired by authorized maintenance personnel. If the lamp bead is damaged or deformed by heat, stop using it, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.
· Do not use and store this product in explosive atmospheres (near flammable volatile solvents such as alcohol, gasoline, or gases such as methane and ethane).
· Maintain at least 1 meter distance between the light head and the user, other people, and heat-sensitive or flammable items during and after operation of the product.
Warning
This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the light or let liquid flow into the light to avoid accidents.
Do not block or cover the heat dissipation port of the product. After use, the product should be completely cooled before packaging. Some products are battery powered: 1. Do not use any batteries, power sources or accessories not specified in the instruction
manual.
16

2. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required.
3. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use may result in fire, electric shock, or skin burns.
4. Do not use any deformed or modified batteries. 5. Do not disassemble or modify this product or battery. 6. Do not heat or solder the battery. 7. Keep the battery away from fire or water. 8. Do not subject the battery to strong external impacts. 9. Do not incorrectly insert the positive and negative ends of batteries, or mix old and new
batteries or different types of batteries.
Attention
· All transport protective materials and packages on the product must be removed before use.
· When not in use, please turn off the product and stop the power supply promptly. · The safety instructions are formulated according to the strict testing of the factory,
and the design and specifications of the equipment are subject to change without prior notice. Customers can view the latest electronic instruction manuals on the official website of Godox and learn about the latest product information.
Foreword
Thank you for purchasing
Godox’s new control box S60Bi-CB is designed for bi-color focusing LED light S60Bi. The exquisite structure can realize handheld portable lighting with optional V-mount battery, built-in wired DMX and wireless Bluetooth together achieve smart control, making it perfect for short video shooting, advertising shooting, e-commerce live streaming, commercial photography, film and television drama and other scenes.
17

Name of Parts
Control Box

2 34 5

1. Color Screen 2. MODE Button 3. MENU Button 4. Bluetooth Button 5. SET Button 6. Select Dial

10 11

7. Power Switch Button 8. DC Output Port 9. Wired DMX Port 10. USB-C Input Port 11. DC Input Port 12. NFC Sensing Area

U-type Bracket
1 2
3 1. V-mount Battery Fixing Slot 2. Battery Detaching Pusher 3. Bracket Locking Knob
19

What’s Inside

Control Box ×1

U-type Bracket ×1

D-TAP to DC Cable ×1

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.

Installation Instructions
1. Install the control box onto the fixture as shown and tighten the locking screws.

2. Connect the DC output port to the DC input port of the fixture.

3. Install the U-type bracket on the other side of the fixture.
Note: The above only displays the installation method, the fixture is sold separately.
Wired DMX Connection
After inserting a separately purchased DMX adapter cable DMX-C2 into the wired DMX port, the fixture is equipped with DMX output and input ports, wired DMX connection can be realized by connecting the separately purchased DMX cable to the console.
Note: The above pictures only show the method to connect the DMX512 controller, the controller, connection cable and are adapter cable DMX-C2 sold separately.
21

Power Supplies
V-mount Battery (14.8V) Insert one end of the D-TAP to DC cable into the separately purchased V-mount battery, the other end into the DC input port of the control box.
Power Adapter (20V) Insert one end of the data cable into the separately purchased power adapter or power bank, the other end into the USB-C input port of the control box.
Power Switch
Connect to power source, toggle the power switch button to turn on the device, toggle to to turn it off.
22

CCT Mode
Short press the MODE button to enter CCT mode, in which you can adjust the DIM and CCT. Rotate the select dial clockwise to increase the parameters, while rotate anticlockwise to decrease the parameters. DIM range: 0.0 100.0 CCT range: 2800K 6500K

FX Mode

Short press the MODE button to enter FX mode, in which you can choose among the following 11 effects and adjust their respective parameters.

Effect Flash
Lightning
Cloudy Broken Bulb TV Candle Fire Firework Explosion
Welding SOS

DIM

CCT

2800K-6500K

0.0 -100.0 × 2800K-6500K × × × × 2800K-6500K
2800K-6500K 2800K-6500K

Speed 1-100
×
Random/1-100 1-100 1-100 1-100 1-100 1-100 1-100
1-100 ×

Others Mode: Camera Flash/ Flash Bulb TriggerAuto/Manual Times: Random/1-10 Frequency: Random/2-20 TriggerAuto/Manual Ratio: 30%-90% × × × × Embers: 1-100 Embers:1-100 TriggerAuto/Manual × ×

Note: Please rotate the select dial to adjust the parameters, then press the confirm button and rotate the select dial to the next parameter. Select manual, the effect can be triggered once by pressing the select dial once. After a certain effect is set, press MODE button can return to the 11 effects interface.

MENU Settings
Press the MENU button to enter menu interface, rotate the select dial and press the SET button to enter the following setting options, press the MENU button can return to the previous interface.

Mode

DMX Rotate the select dial and press the SET button to enter DMX interface, rotate the select dial and press the SET button to adjust the following settings.
24

01: CCT 8 Bit Hold Last

Level 1 Option Level 2 Option

Description

Address

001-512

Initial address

DMX Mode 01: CCT 8 Bit

CCT mode in 8bit

02: FX 8 Bit

FX mode in 8bit

03: CCT 16 Bit

CCT mode in 16bit

04: FX 16 Bit

FX mode in 16bit

05: ULTIMATE 8 Bit ULTIMATE mode in 8bit

06: ULTIMATE 16 Bit ULTIMATE mode in 16bit

RDM State On

Turn on RDM, the controller can set the fixture

address and DMX mode

Off

Turn off RDM

DMX Lost

Hold Last Command After the DMX control signal is lost, continue to use

the last received DMX control signal until power

down or a valid DMX control signal is received again.

Black Out

The light is off immediately.

Black Out After 2 min After the DMX control signal is lost, continue to use

the last received DMX control signal for 2 minutes

then black out.

Note: If a valid DMX control signal is received within 2 minutes,

then use the new DMX control signal.

Termination On

Turn on DMX terminal

Off

Turn off DMX terminal

Ext-Channels On

Turn on extend DMX channels

Off

Turn off extend DMX channels

DMX Table Scan to check the DMX table

Bluetooth
Rotate the select dial and press the SET button to enter Bluetooth interface, rotate the select dial and press the SET button to turn it on/off, or reset. The MAC code is on the corner for quick check.
Quick Bluetooth Reset Press and hold the Bluetooth button until the progress bar is full, then the Bluetooth is resetting.
25

“GODOX Light” app Downloading
Scan the QR code to download the “Godox Light” smartphone app (can be used in Android and iOS).
Note: 1. The app can be used directly on the firstly installed device (smartphone or tablet). When change to other mobile device (smartphone or tablet), the light shall be reset before the normal connection of the app. 2. The app should be version 3.0 or above.
“GODOX Light” app Firmware Upgrade
Open Godox Light, enter a certain scene and click “+” to add a fixture, then click to display more settings, choose firmware upgrade.

Firmware Upgrade Bluetooth firmware upgrade data It is the latest version
MCU firmware upgrade data MCU firmware upgrade failed
It can be detected that the connection is normal and then try…
Close

Dimming Curves
Rotate the select dial and press the SET button to enter dimming curves interface, rotate the select dial and press the SET button to select among linear, S-curve, exponential and logarithmic.
Smoothing
Rotate the select dial and press the SET button to enter smoothing interface, rotate the select dial and press the SET button to select among default, smooth and off.

Smoothing Default
Smooth
Off

Note The brightness data is basically smoothed to achieve smooth dimming and shorten the response time. The brightness data is smoothed to achieve ultra-smooth dimming with a slow response time. No smoothing of brightness data, fastest response time.

Control Mode

Rotate the select dial and press the SET button to enter control mode interface, rotate the select dial and press the SET button to select between normal and low end, then rotate the select dial and press the SET button to adjust the frequency from 1 to 11.

Control Mode Suitable Environment

Normal

Normal dimming

Low End

TV series/Movie

Dimming Feature Proper in the whole dimming range Proper in low dimming

Blink Unlikely
Probably

Fan
Rotate the select dial and press the SET button to enter fan interface, rotate the select dial and press the SET button to choose among off, auto, medium and high.

Display Rotate the select dial and press the SET button to enter display interface, rotate the select dial and press the SET button to adjust the display brightness from 10% to 100%.
28

Language
Rotate the select dial and press the SET button to enter language interface, rotate the select dial and press the SET button to choose between simplified Chinese and English.
Version
Rotate the select dial and press the SET button to enter version interface to check the firmware version and upgrade instruction.

Version

V1.00

Firmware Upgrade
1. Insert the separately purchased DMX adapter cable DMX-C2 into the wired DMX port. 2. Download the new firmware to the U disk from official website (https://www.godox.com/ firmware-continuous-light). 3. Turn off the device. Insert the U disk with new firmware into the USB-A port. 4. Press the MODE button and turn on the device, it will automatically enter the upgrading interface. 4. It will return to main interface after completion.
Notes: New firmware must be downloaded from the official website, and keep only one BIN file in the root directory of the USB disk.

Factory Reset
Rotate the select dial and press the SET button to enter factory reset interface to choose yes or no. If you choose yes, the device will automatically reset and reboot, then simplified Chinese and English options show on the display for your choice, after which the brightness will turn to 100% automatically.
Fixture Info
Rotate the select dial and press the SET button to enter fixture info interface to check the product basic information.
NFC Fixture Addition Use the NFC function of smartphone and NFC chip of the light fixture to connect them, then add the light fixture to Godox Lightapp. 1. Preconditions: light fixture supports NFC addition, Godox Light app is V3.2.4 or above, Bluetooth and NFC functions of smartphone are turned on. 2. Operation Instructions: subject to the fulfillment of preconditions, turn on the Godox Light app and enter the corresponding scene, click +to selectNFC Addition function, bring the NFC sensing area of smartphone near the sensing area of light fixture to scan to add in NFC Additioninterface, bulk addition is also supported.
Note: Android systems can complete the addition by directly closing the sensing area, while iOS system need to click the < NFC > icon on the right top and wait for the pop-up window then add.
30

Technical Data
Model USB-C Input Port DC Input Port CCT Range Brightness Range Dimming Curves FX Modes Controlling Methods Bluetooth Controlling Distance Working Environment Temperature Dimension Net Weight

S60Bi-CB 20V 5A 12V-16.8V 6A 2800K 6500K 0.0% 100.0 linear, S-curve, exponential, logarithmic 11 Wired DMX/RDMBluetoothcontroller control 60m -20 40
7.2″x3.19″x0.98″ 170g

Specifications and data may subject to changes without notice.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning
Operating frequency: 2402MHz 2480MHzBT Maximum EIRP Power: -0.74dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/ The device complies with RF specifications when the device used at 0mm from your body.
32

IC Warning
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement Tout changement ou modification non expressément approuvé par la partie responsable de la réglementation de l’OCDE peut faire perdre à l’utilisateur le droit d’utiliser l’appareil. Remarque: cet appareil a été testé pour répondre aux limites des appareils numériques de classe B conformément à la partie 15 des règles de la Federal Communications Commission des États – Unis. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans les installations résidentielles. L’appareil génère de l’énergie RF utilisée et rayonne, ce qui peut causer des interférences nocives pour les communications radio s’il n’est pas installé et utilisé conformément aux instructions. Cependant, aucun Garantie contre les interférences dans une installation spécifique. Si l’appareil cause des interférences nuisibles à la réception de la radio ou de la télévision, qui peuvent être déterminées en éteignant et en allumant l’appareil, l’utilisateur est encouragé à tenter de corriger les interférences par une ou plusieurs des mesures suivantes: – redirection ou repositionnement de l’antenne de réception. – augmenter l’espacement entre l’appareil et le récepteur. – Connecter l’appareil à une prise sur un circuit différent de celui auquel le récepteur est connecté. – consultez votre revendeur ou un technicien radio / tv expérimenté pour obtenir de l’aide. Avertissement RF pour les appareils portables: L’appareil a été évalué pour répondre aux exigences générales d’exposition aux radiofréquences. Équipement Peut être utilisé sans restriction dans des conditions d’exposition portables.
33

( ) ( )

0755-29609320-8062

Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information Customer Information
Seller Information
Note

Model
Name Address Name Contact Number Address Date of Sale

Product Code Number Contact Number
Note: This form shall be sealed by the seller.

Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type

Name

Parts

Circuit board

Other Items

U-type Bracket, cable, or other packages, etc.

Maintenance Period(month) 12
No

Warranty Service Type Customer sends the product to designated site
Without warranty

Godox After-sale Service Call +86-755-29609320(8062)

Documents / Resources

Godox S60Bi LED Light Control Box [pdf] Instruction Manual
S60Bi, S60Bi-CB, S60Bi LED Light Control Box, LED Light Control Box, Light Control Box, Control Box

References

User Manual

Godox S60Bi LED Light Control Box Instruction Manual

S60Bi LED Light Control Box

Product Specifications:

Product Usage Instructions:

Safety Instructions and Precautions: