Contents
hide
Go Power GP-RVC-DIS-3 Power Trak Display
Product Specifications
DISPLAY
- Size: 3.2 inches
- Resolution: 320×240
- Touchscreen: Resistive
ELECTRICAL
- Supply Voltage: 7.5 to 76 VDC
- Max Supply Current @ 12 VDC Input: 150 mA
- Max Supply Current @ 24 VDC Input: 80 mA
MECHANICAL
- Dimensions: 4.77 x 2.84 x 0.51 inches
ENVIRONMENTAL
- Operating Temperature Range: Not specified
- Storage Temperature Range: Not specified
- Humidity: Not specified
COMMUNICATIONS
- Connectivity Range: 50 meters (unobstructed)
- WiFi Bandwidth: 2.4 GHz
Product Usage Instructions
- Installation and Wiring
- The GP-RVC-DIS-3 should be mounted as close to the battery as possible and on a wall.
- Initial Setup/Bootup
- Refer to the PowerTrak Display Manual for detailed setup instructions.
- Different Device Screens
- Note that the PowerTrak System interface may vary based on the connected devices. Consult the manual for specific settings for each compatible device.
- Optional Components
- Additional components include an RV-C Extension Cable (25ft) and a GP-Shunt Power Cable.
Specifications
| DISPLAY | |
| Size | 3.2” |
| Resolution | 320×240 |
| Touchscreen | Resistive |
| ELECTRICAL | |
| Supply Voltage | 7.5 to 76 VDC |
| Max Supply Current @ 12 VDC Input | 150 mA |
| Max Supply Current @ 24 VDC Input | 80 mA |
| MECHANICAL | |
| Dimensions | 4.77” x 2.84” x 0.51” |
| ENVIRONMENTAL | |
| Operating Temperature Range | -20 to +50 °C |
| Storage Temperature Range | -30 to +70 °C |
| Humidity | 5-95 % RH, non-condensing |
| COMMUNICATIONS | |
| Connectivity Range | 50 meters (unobstructed) |
| WiFi Bandwidth | 2.4 Ghz |
Sold separately. Contact your Go Power! representative for more information
BATTERY INFORMATION SCREEN
| NO. | DESCRIPTION | NO. | DESCRIPTION |
| No. | Description | No. | Description |
| 1 | Battery Image Indicator | 6 | Input/Output Current (+/-) |
| 2 | Battery Percentage Remaining | 7 | Ah Remaining |
| 3 | Battery Temperature | 8 | Settings |
| 4 | Battery Voltage | 9 | Time Remaining |
| 5 | Input/Output Power (+/-) | 10 | Connectivity Icon |
INSTALLATION AND WIRING – OVERVIEW
The GP-RVC-DIS-3 needs to be mounted as close to the battery as possible and intended to be mounted on a wall.
INITIAL SETUP/BOOTUP
- Boot Up
- Battery Check
- Initial Setup
Press load once all devices are shown on the list
DIFFERENT DEVICE SCREENS
RECOMMENDED TOOLS
- Wrench
- Drill
- 2″ hole saw
- 2 ring terminals of appropriate size for battery cable
- Crimp tool for ring terminals
SETUP
For further information refer to PowerTrak™ Display Manual
FOLLOW THE PATH BASED ON THE PRODUCT YOU ARE TRYING TO CONNECT
Note: PowerTrak System may vary based on configured devices, refer to our manual for specific settings for compatible PowerTrak devices.
OPTIONAL COMPONENTS
LEARN HOW:
to size your system for PowerTrak™ scan to use our PowerTrak™ calculator
FAQ
- How do I access the full manual?
- To access the full manual, scan the provided QR code or visit gopowersolar.com/BMG.
- Where can I find technical tips, manuals, and support?
- You can find technical tips, manuals, and support at gopowersolar.com/BMG.
- How do I size my system for PowerTrak?
- To size your system for PowerTrak, scan the QR code provided or use the PowerTrak calculator available on our website.
Documents / Resources
 |
Go Power GP-RVC-DIS-3 Power Trak Display [pdf] User Guide GP-RVC-DIS-3 Power Trak Display, Power Trak Display, Trak Display, Display |