Drop Gonoknok Smart Parcel System
“
Product Specifications:
- Legs: 4x
- Anchor Bolt: 4x
- GO NOKNOK drop Device with Threaded Nut: 4x (pre-installed into
unit) - Tools Needed: Battery, Wi-Fi Antenna, Key 2x, Drill, Drill Bit
16 mm, Hammer, 17mm or 19mm socket wrench, Marker
Product Usage Instructions:
Installing the Legs:
- Carefully place the GO NOKNOK drop flat on its back on a soft
surface to protect the body and finish. - Align and position each leg against the bottom of the unit so
that the bolt hole lines up with the pre-installed nut in the
body. - Tighten each leg unit and make sure they are firmly secured and
level. Do not overtighten. - Gently lift the unit upright and check that all legs are
touching the ground evenly. The box should stand flat and stable
and level.
Anchoring the Unit to the Ground:
- First, choose a level surface then place the GO NOKNOK drop in
its final location on concrete, paving slabs, or another solid,
flat surface. - Mark drill points with the unit in position, use a pencil or
marker to mark the 4 bolt holes in the feet of the legs onto the
floor. - Move the unit out of the way to expose the marked drill
points. - Drill the holes using a 16mm masonry drill bit, drill holes to
a minimum depth of 80mm at each mark. - Clean and remove any dust or loose debris from each hole for
best anchor fit. - Move the unit back into place. Insert the M12 x 80mm bolts
through each leg hole and into the drilled holes in the floor. - Lightly tap each bolt down with a hammer (if needed), then use
a socket wrench to tighten them fully. - Test the stability by gently rocking the unit. It should feel
firmly locked in place with no wobble or shift.
Frequently Asked Questions (FAQ):
Q: What tools are required for installing the GO NOKNOK
drop?
A: The tools required for installation include a battery, Wi-Fi
Antenna, Key (2x), Drill, Drill Bit (16 mm), Hammer, and a 17mm or
19mm socket wrench.
Q: How do I power on the GONOKNOK device?
A: Insert the battery into GO NOKNOK to turn on the device. The
device enters pairing mode, indicated by a blinking LED light and
voice instructions.
Q: What is the next step after creating an account or logging
in on the GO NOKNOK app?
A: After creating an account or logging in, follow the
step-by-step instructions in the app to get everything connected,
make sure to connect to a (2.4GHz) Wi-Fi network, and follow the
best method to connect with your GO NOKNOK device.
“`
GO NOKNOK DROP INSTALLATION GUIDE
GO NOKNOK drop Assembly Kit What you’ll receive
go noknok
Legs 4x
Anchor Bolt 4x
GO NOKNOK drop Device with Threaded Nut 4x (pre-installed into unit)
Tools you’ll need
Battery
Wi-Fi Antenna
Key 2x
Drill
Drill Bit 16 mm
Hammer
17mm or 19mm socket wrench
Marker
Installation
go noknok
Installing the Legs
1 | Carefully place the GO NOKNOK drop flat on its back on a soft surface to protect the body and finish.
2 | Align and position each leg against the bottom of the unit so that the bolt hole lines up with the pre-installed nut in the body.
3 | Tighten each leg unit and make sure they are firmly secured and level. Do not overtighten.
4 | Gently lift the unit upright and check that all legs are touching the ground evenly. The box should stand flat and stable and level.
Anchoring the Unit to the Ground
1 | First, choose a level surface then place the GO NOKNOK drop in its final location on concrete, paving slabs, or another solid, flat surface.
2 | Mark drill points with the unit in position, use a pencil or marker to mark the 4 bolt holes in the feet of the legs onto the floor.
3 | Move the unit out of the way to expose the marked drill points.
4 | Drill the holes using a 16mm masonry drill bit, drill holes to a minimum depth of 80mm at each mark.
5 | Clean and remove any dust or loose debris from each hole for best anchor fit.
6 | Move the unit back into place. Insert the M12 x 80mm bolts through each leg hole and into the drilled holes in the floor. (Please refer to next page for details)
7 | Lightly tap each bolt down with a hammer (if needed), then use a socket wrench to tighten them fully.
8 | Test the stability by gently rocking the unit. It should feel firmly locked in place with no wobble or shift.
Installation Complete Your GO NOKNOK drop is now fully assembled and anchored – ready to receive, return, and send parcels with complete confidence.
Installation
Fitting Floor Mounting Bolts
go noknok
A: Legs 4x B: M12 x 80mm
Anchor Bolts 4x A
B
Ensure Wi-Fi router is in clear range
Installation
go noknok
Setting Up: Get Started
1 | Download and Install the GO NOKNOK App Search for “GO NOKNOK App” in your device’s app store or scan the QR code Download and install the app on your smartphone.
GONOKNOK
Google Play
App Store
2 | Create an Account or Log In Open the GONOKNOK App. Register new account (I) if you don’t have one or Sign in with your credentials (II)
I.
II.
3 | Power On Your GONOKNOK Device
Insert the battery in GO NOKNOK to turn on the device. The device enters pairing mode, indicated by a blinking LED light and voice instructions.
Installation
go noknok
Setting Up: Get Started
4 | Next, follow the step-by-step instructions in the GO NOKNOK App to get everything connected. (Screenshots included below)
5 | Make sure to connect to a (2.4GHz) Wi-Fi network. (V)
III.
IV.
V.
*
VI.
VII.
VIII.
IX.
6 | Click Next, and follow the Best Method to connect with your GO NOKNOK device.
Installation
go noknok
Setting Up: via Bluetooth Best Method
7a | Enable Bluetooth on Your Phone Go to your phone settings and turn on Bluetooth. Ensure Bluetooth pairing is allowed for nearby devices. Next, go back to the GO NOKNOK App and follow the on-screen prompts.
X.
XI.
“GONOKNOK” to find
8a | Add Your GO NOKNOK Device via Bluetooth Tap the “Pair via Bluetooth” button to begin scanning for the GO NOKNOK device. (XII) The GO NOKNOK App will automatically scan for available Bluetooth devices in pairing mode.
XII.
XIII.
XIV.
Connecting to your DGeOvNicOeKNDOeKtedecvtieced
Installation
go noknok
Setting Up: via Bluetooth Best Method
9a | Complete the Connection Setup Once successfully connected, the GO NOKNOK device will confirm the pairing by voice note. Next, you can now select a plan to unlock more advanced features or view your device.
Note: Ensure your phone has been granted Bluetooth permissions for successful
pairing.
Your GO NOKNOK device is now successfully connected and ready to use!
XV.
Device Added
Installation
go noknok
Setting Up: via QR Code
Alternate Method
7b | If Bluetooth connection fails or your GO NOKNOK device isn’t discovered in the app, ensure Bluetooth is enabled on your phone and is allowed to discover new devices.
8b | Alternatively, tap the “Pair via QR Code” button to complete setup using the QR code method.(XVI)
XVI.
XVII.
XVIII.
XIX.
Device Added
XX.
9b | Next, Scan the QR code on the next screen (XVIII) for 5 seconds to link your device. 10b | Now you can select a plan to unlock more advanced features or view your device.
Your GO NOKNOK device is now successfully connected and ready to use!
Feature Overview
Security & Access
Siren / Alarm Triggers a loud siren to deter intruders.
SOS Button One-tap instant emergency assistance.
Unlimited Cloud Storage Auto-save & record videos to cloud and access them anytime.
Remote Lock/Unlock Send, Return, Receive remotely.
Up to 5 Accounts Share device access with family, partners & flatmates.
go noknok
Monitoring & Support
Live HD Streaming Real-time video & audio from anywhere.
Motion-Detection Alerts Real-time notifications & auto HD video recordings.
Two-Way Talk Speak directly with visitors from your phone.
Snapshot Capture Take photos of the live video feed.
Human Alert Get notified when a person is detected.
*For a complete list of features and plan details, please visit our website.
Extras
go noknok
Thank you!
For choosing GO NOKNOK drop as your secure and smart parcel box If you’d like assistance with installation or first setup, we’re here to help–just reach out to us at hello@gonoknok.com or chat with us on our website at www.gonoknok.com
YouTube
Website
Scan to visit our YouTube channel
Scan to visit our website for tutorial videos on our
Guide Hub page
Did you know?
You can now order a Spare Battery for your GO NOKNOK drop from our website. With a Spare Battery, you’ll ensure continuous operation without interruptions.
Documents / Resources
 |
GO NOKNOK Drop Gonoknok Smart Parcel System [pdf] Installation Guide DAGuKISMC3o, BAEYX3jmwNU, Drop Gonoknok Smart Parcel System, Smart Parcel System, Parcel System |