GLSOWEE Start Stop Engine Button Switch Cover
Overview
The Start Stop Engine Button Switch Cover is a replacement cover for an old or worn car button. It is made from wear-resistant ABS plastic with a piano paint finish and is designed for direct, easy replacement installation.
Specifications
- Material: ABS
- Color Options: Red / Black / Blue
- Diameter: 23mm / 0.91″
- Process: Piano paint finish
- Installation Method: Replacement installation
Applicable models listed: BMW 1 Series (2004–2011, E87); BMW 3 Series (2005–2012, E90/E91/E92/E93); BMW 5 Series (2002–2009, E60); BMW X1 (2009–2015, E84); BMW X3 (2003–2010, E83); BMW X5 (2006–2013, E70); BMW X6 (2007–2014, E71); BMW Z4 (2009–2016, E89).
Quick Setup / Use
- Ensure the replacement cover matches your selected color option (Red/Black/Blue).
- Using replacement installation, remove the old/worn engine start button cover.
- Install the new Start Stop Engine Button Switch Cover using the direct connector.
- Verify the cover is seated correctly (no cutting or splicing is required).
Note: Keep the product away from children to avoid accidental ingestion or injury.
Manufacturer & EU Representative Info
Manufacturer:
- Company Name: HuaXiaCuiFang(Tianjin) E-commerce Co.,Ltd Full
- Address: Room NO.3201 Building NO.5 B Qu, WanXin Street TongQing Road, DongLi District, TianJin, China, 300162
- Email: sunnytechcity@hotmail.com
- Phone: 86-13426168557
EU Authorized Representative:
- AR Company Name: XDH Tech Full Address: 37 passage du Ponceau Bureau 270, Paris, 75002
- Email: xdh.tech@outlook.com
- Phone: +33 652768898
Safety & Warnings
Warning: Keep it away from children to avoid accidental ingestion or injury.
Instructions for Use
Features:
- This is an engine start button cover designed as a replacement for the old or worn one of your car.
- Made of high-quality plastic and highly wear-resistant.
- Fine workmanship with a piano paint finish prevents paint shedding.
- Easy to install; provides a direct and correct connector with no cutting or splicing required.
Applicable Models
- BMW 1 Series 2004-2011 (E87)
- BMW 3 Series 2005-2012 (E90/E91/E92/E93)
- BMW 5 Series 2002-2009 (E60)
- BMW X1 2009-2015 (E84)
- BMW X3 2003-2010 (E83)
- BMW X5 2006-2013 (E70)
- BMW X6 2007-2014 (E71)
- BMW Z4 2009-2016 (E89)
Product Included
- Red Option: 1 x Start Stop Engine Button Switch Cover
- Black Option: 1 x Start Stop Engine Button Switch Cover
- Blue Option: 1 x Start Stop Engine Button Switch Cover
About this item
- 【Applications】:The car push-button start cover has an outside diameter of approximately 1.45 inches and an inside diameter of approximately 1.14 inches and fits most vehicles with a power start/stop button. Note: Before purchasing, please check the size of the product to make sure it fits.
- 【Practical Design】:The car engine start/stop button cover is designed with a 180° flip-top, stable and non-jamming. You can choose to cover or display the button according to your needs, protect the button from abrasion/scratch, avoid children accidentally touching the button, improve driving safety.
- 【Stylish and Beautiful】:The car key start button cover is designed with a cool and fashionable appearance, a three-dimensional sense, glossy and bright, the curvature can perfectly fit the original button, enhance the grade of the car, and enhance the sporty atmosphere of your car.
- 【Reliable Material】:The car starter button cover is made of high-quality zinc alloy material, sturdy, with a smooth surface, high hardness, wear and corrosion resistance, and the edges are polished, rounded and delicate, does not hurt your hand.
- 【Easy to Install】:The car engine switch button cover is equipped with 2 backing adhesive rings, strong adhesion, and not easy to fall off. Just tear off the protective film and stick it in the right place, then stick the button cover on it. Note: Please clean the surface of the buttons before installation, ensure they are dry before use, and slightly warm the adhesive backing with a hair dryer to improve adhesion.
Description
Troubleshooting
- Cover does not fit or align during replacement: Confirm you are installing the correct replacement cover and that it matches the applicable BMW model/series listed for this product.
- Concerns about paint appearance: The cover uses a piano paint finish intended to prevent paint shedding; handle carefully during installation to avoid unnecessary contact or damage.
- Installation seems to require cutting/splicing: The instructions for use indicate direct replacement installation with a correct connector; re-check that you are using the replacement installation method intended for this part.
Documents / Resources
 | Start Stop Engine Button Switch Cover |
References
- User Manualmanual.tools
Published: August 13, 2026