Global Sources RG35XXSP Portable Psp Game Console
Product Usage Instructions
- This device complies with part 15 of the FCC Rules, ensuring its operation meets regulatory standards.
- The device must not cause harmful interference and should accept any interference received, including that which may cause undesired operation.
- Any changes or modifications not expressly approved by the responsible party could void the user’s authority to operate the equipment. It is essential to adhere to approved modifications only.
- The equipment complies with FCC radiation exposure limits suitable for an uncontrolled environment, ensuring safe usage under standard conditions.
- The device has been evaluated to meet general RF exposure requirements, ensuring its safe use in various scenarios.
- The device can be used in portable exposure conditions without any restrictions, providing flexibility in its application.
Main interface operation
Main Interface Menu
Game Import
- Insert a FAT32 formatted memory card into the external card slot of the game console, and a new folder for each platform will be created. Just put the game in the folder and select the game in the game rooms.
- Supported platforms are: ported games, PSP, PS1, N64, DC, NDS, ARCADE, GBA, GBC, GB, S FC, FC, MAME, MD, GG, PCE, Sega32x, NGPC, SMS, WSC
Get technical support services
Common Settings
Language Settings
- Select Settings-> Language Settings in the main interface.
- Available languages are: Chinese, English, Japanese, Korean, Russian, French, German, Spanish, Portuguese
Backlight Brightness
- Select Settings -> Backlight Brightness in the main interface.
- There are 5 levels of backlight brightness.
Backlight Time
- Select Settings -> Backlight Time in the main interface.
- There are 1 minute, 2 minutes, 5 minutes, 10 minutes, and always on.
- The screen backlight will be turned off after the set time has elapsed.
Key Customization
- Button Custom: Select Settings -> Button Custom in the main interface.
- You can customize the button mapping of the body buttons or the gamepad.
Game quality
- divided into high-definition, the scan line, fast, and dot matrix. Different options will present different screen filter display effects.
Game Settings
Game quality
- divided into high-definition, a scan line, fast, and dot matrix. Different options will present different screen filter display effects.
Game streaming
- First, make sure that the game console and the computer are under the same WIFI. Select Settings -> Moonlight in the main interface.
- Enter the IP address of the computer to start pairing. Enter the PIN code to pair successfully and select Connect. During streaming, press menu+START to exit streaming.
Bluetooth Settings
- First, select Settings-Bluetooth Settings in the main interface, select Enable Bluetooth, and press the X key to scan for devices in the Search device. Finally, select the controller you want to connect according to the device name.
Indicator light and charging function
- The packaging of the machine is matched with a 5V/1.5A four-lines charging data cable. Plug in the charging cable and the machine will start charging.
- RG35XXSP has two indicators, the down is the charging indicator, and the Up is the working indicator.
- The following light color and status table:
RA Emulator Shortcuts
Online Play
- First make sure the two consoles are on the same WIFI
- Note down the IP addresses of the two consoles by going to
- NETWORK SETTINGS ->IP ADDRESS
- In the RetroArch, enter the same game and call out the menu through the menu
- Set it up with the following steps:
- Game console A (host)
- Select Netplay->Host-> Start Netplay Host
- Game console B (slave)
- Select Netplay-> Connect to Netplay Host, enter the IP address, and press the START button to connect successfully
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.
FAQ
- Q: Can this device be used in areas with high interference?
- A: The device is designed to handle interference and should operate effectively in such conditions.
- Q: Are there any restrictions on the portable use of this device?
- A: No, the device can be used in portable exposure conditions without any restrictions.
Documents / Resources
 |
Global Sources RG35XXSP Portable Psp Game Console [pdf] Owner's Manual 2AJU8-RG35XXSP, 2AJU8RG35XXSP, rg35xxsp, RG35XXSP Portable Psp Game Console, RG35XXSP, Portable Psp Game Console, Psp Game Console, Game Console, Console |