global sources PD-PIR114 Infrared Sensor Lamp
Specifications
- Power source:220-240VAC
- Power frequency:50/60Hz
- Rated load:40W Max. (tungsten & fluorescent & LED)
- Time setting: half light mode (only for incandescent light source and LED bulb lamp. The LED bulb lamp must with dimming function).
- delay time: IOS — 12min (adjustable)
- delay (adjustable) normal mode
- delay time: 1 OS 12min(adjustable)
- Detection range: 6-8m
- Light-control: 10-2000LUX (adjustable)
- Detection angle: 1200/1000
- Installation height:2.5-3.5m (ceiling) 11.5-3m(wall)
- Working temperature: -10 C —40 ‘C
- Working humidity: <93%RH
- Detection speed: 0.6—1.5m/s
- Lamp socket type: E27(Standard)
Available lamp type
(Before installation fixed, according to the type of light source then choice switch position.)
PD-PIR114 Infrared Sensor Lamp Instruction
- Realize the ambient light illumination automatically.
- Adjust the detect time-delay discretionarily.
- Adjust the ambient light illumination discretionarily
- Various light source of E27 type can be installed.
- Available in ceiling mount and wall mount.
- Detect the infrared radiation signal from human body.
Sensor information
Procedure of installation
Note:Please bring the following tools 
- Please keep it away from the children.
- This product can installed for outdoor, but we suggest that against for the rain/storm & High lights.
Warning!
- Mark the place where the product is installed.
- Drill the hole with inflated screw.
- Fix the inflated screw with hammer.
- Connect the power wiring.
- Fix the product to the wall with screw.
wall mounting
Dimension
Documents / Resources
 |
global sources PD-PIR114 Infrared Sensor Lamp [pdf] Instructions PD-PIR114, PD-PIR114 Infrared Sensor Lamp, Infrared Sensor Lamp, Sensor Lamp, Lamp |