GLEMM MXP 8C-MXP 10C Multichannel Microphone Mixer

MORE INFO

Scan the QR code to search for the manual in your language if it is available

PACKAGING CONTENT

When you open the package check that the product is in good condition and that all the parts are present, immediately notify the seller if any part is damaged or missing.

THANK YOU FOR YOUR PURCHASE

• The product you have purchased is the result of careful planning by specialized engineers. High-quality materials were used for its construction, to ensure its functioning over time.
• The product is manufactured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety
• Please read this manual carefully before starting using the device to take advantage of its full potential.
• Hoping that you will be satisfied with your purchase, we thank you again for your trust in our brand and we invite you to visit our website www.glemm.eu where you will find the whole range of our products, along with useful information and updates.
• Note: this manual refers to 4 mixer models differing from each other only in the number of available channels

IMPORTANT SAFETY INSTRUCTION

• Read and follow the instructions contained in this manual strictly.
• Keep this manual for future reference and include it if you give the product to another user. This device works with dangerous 1 DD – 240V mains power. Do not open, do not disassemble, and don’t try to operate inside it. In case of wrong use, an electric shock may occur.
• The product is conceived for professional use. Its installation must be carried out exclusively by specialized technicians, skilled in electric and audio systems. In case of wrong installation or connections, the manufacturer doesn’t take any responsibility for damages to people or objects.
• Make sure that the voltage indicated on the product matches the power outlet voltage. A wrong voltage would seriously damage the fixture.
• To avoid the risk of dangerous electric shocks, before turning on the product always check that it is connected to the ground. Never cut internal or external ground wires.
• Before making any connection with other devices, check that all the fixtures are disconnected from the power source and that all the volumes are set to a minimum.
• The product is not suitable for outdoor use. To avoid the risk of shortcircuits don’t expose it to high temperatures [above 40°), rain, or humidity.
• Do not allow flammable liquid, water, or metal objects to enter the product.
• Don’t touch the product with wet hands.
• Do not place any recipients filled with liquids, such as vases, on top of or directly next to the appliance.
• Install the product in a stable and ventilated position, far from heat sources, and don’t obstruct the air vents.
• Use the fixture and its controls with due accuracy, avoiding falls, vibrations, or impacts.
• If the product doesn’t turn on, check the fuse and if necessary replace it with one of the same type and rating, after disconnecting the fixture from power.
• In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damage both to the fixture and to people.
• Do not turn the product on and off at short intervals, it may reduce the life of the device. Disconnect the unit from power when it is not used.
• Never disconnect the product from the power source by pulling on the cord. Do not cut, kink, or otherwise damage nor modify the power supply cord, and periodically check that it is in good condition.
• Disconnect the unit from power and wait for it to cool down before cleaning or maintenance. To clean the product, use only a dry or slightly damp cloth, avoiding solvents or detergents of any kind.
• Keep away from children’s reach
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
  • WARNING RISK OF ELECTRIC SHOCK, DO NOT OPEN
  • WARNING: to reduce the risk of electric shock, do not remove the cover. No serviceable parts for the user inside. For servicing refer to qualified personnel.
• This symbol alerts you to the presence of important operating and maintenance instructions, in the manual or in the documentation accompanying the product
• This symbol alerts you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.
• This symbol warns you of the risk of hearing damage in case of prolonged exposure to high volume levels.
• The CE mark indicates that this product complies with the applicable European directives and their related standards. Compliance documentation in complete form is available at the company Karma Italiana Srl
• Directive 2012/19/UE regarding electric and electronic equipment waste (WEEE). The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste. The user must, therefore, confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one-to-one, or one-to-zero if the external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to recycling, treatment, and environmentally compatible disposal helps to prevent negative impacts on the environment and human health and promotes recycling of the materials making up the product. In Italy, illegal dumping of the product by the user entails the application of administrative sanctions under Legislative Decree n. 49 (14/03/2014).

OPERATING INSTRUCTIONS

POWER SUPPLY

• Make sure that the mixer’s power button (34) is in the OFF position.
• Insert the power cable into the socket (33) and connect the e-collegiate plug to a power outlet compatible with the voltage indicated on the fixture.
• Turn on the mixer only after making all the connections indicated on the next pages.
• To turn on the mixer, switch the button (34) to the ON position: the POWER (27) LED will light up. If the LED doesn’t light up, turn off the mixer, disconnect the power cable, and check the integrity of the fuse in the small compartment below the power socket (33).

MODULE A

Connect your fixtures endowed with a 6,3 mm (unbalanced) or XLR connector (balanced) to the sockets (1 ). The mixer supports both microphone and line signals.

• Using the slider (9) you can adjust the volume of the mixing channel. You can use at the same time the gain control (3) to ensure the right relationship between volume and sound clarity. A too-high gain could bring to sound distortion. Always check that the PEAK led (2) doesn’t remain steadily lit. This indicates the presence of a too-high signal that could damage the fixture. Use the gain/volume control to adjust it as desired.
• The high tones can be adjusted using the knob (4).
• The mid tones can be adjusted using the knob (5).
• The bass tones can be adjusted using the knob (6).
• If you apply an effect on a channel it can be adjusted using the knob (7)
• To balance the sound between the right and left channels you can use the specific control PAN(B).

MODULE B

• It is possible to connect to the TAPE (1 OJ socket and external audio fixture, such as CD, TAPE, etc. The volume can be adjusted with the control (22).
• A recorder can be connected to the RCA sockets (11]
• The mixed signal to be sent to the amplifier is available on the connectors (12-13).
• The 6,3mm socket (15) is designed to send the signal of one or more channels to an external processor that will manipulate it and resend it to the mixer through the socket (16). The effect on each channel can be adjusted using the knob (7). The control (23) is used to adjust the volume.
• The 6,3mm stereo socket (14) is intended for the connection of headphones, which will be used to monitor the audio signal. The volume can be adjusted from the control (31 ).

MODULE C

• The multimedia module includes a (17), a USB port (26) (where to connect sticks including Mp3 tracks), and some keys to control the tracks playback (1 BJ. Using the MOOE key you can switch from an MP3 player to a bluetooth receiver. The central keys allow you to skip to the next/ previous track, while thanks to the REC key it is possible to pause, restart playback, or record on a pen the whole mixing. The volume level can be adjusted by the slider (25).
• Thanks to the 5-band equalizer (19) you can adjust with precision the tones of the final mixed signal and possibly optimize it.
• Under the equalizer, there are the following 3 volume controls: TAPE (22) for the signal connected to RCA sockets (1 OJ, RETURN (23) for the external return effect, and PHONES (31 J to adjust the headphones’ volume.
• During operation, you will see the LEDs (30) light up to indicate the output signal level. Use the volume controls to avoid too high signals.
• The mixer includes a sophisticated □SP circuit, which can process audio producing particular effects. Use the buttons (20) to select one of the presets and adjust the effect by means of the control (21 ).
• Gli sliders (32) adjust the output volume on the left and right channels.
• If the microphones connected to the sockets (1 J require a phantom power supply, press the button (2B). The led (29) confirms that phantom power is activated. Do not activate this kind of power supply with dynamic microphones: you could damage them.
• The mixer features a bluetooth module to receive audio from smartphones or tablets. Use the MODE button to activate the function. Search for the mixer in your smartphone’s bluetooth menu. Once paired all the smartphone’s audio will be sent to the mixer to be processed as desired. The bluetooth signal volume can be adjusted directly from the smartphone.

PC-LINK: The USB port (26) can be used not only to play MP3 tracks but also to connect the mixer to a computer (for example to record the mixing on a file). It is also possible to receive audio from the computer and mix it as desired. Once you have connected the mixer use the computer software to control it as if it were a sound card that can receive or send audio.

EU COMPLIANCE DECLARATION

• Hereby, KARMA ITALIANA SRL declares that the product mixers with bluetooth MXP 8C, MXP 10C, MXP 14C, and MXP 18C comply with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.karmaitaliana.it.

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS
	MHPBC	MHP 1DC	MHP 14C	MHP 18C
CHANNELS	8	10	14	18
MIC INPUTS	6	8	12	16
LINE INPUTS	1 [tape]
LINE OUTPUTS	1 [reel
MASTER OUTPUTS	2 x XLR [UR]
PHONES PLUG	Jack 6,3mm ST
PHANTOM POWER	+48V
EQUALIZER	5 bands
MULTIMEDIA PLAYER	With MP3 player, Bluetooth, and REC function
PC LINK	Bidirectional
TONE CONTROLS	High, Mid & low
DSP	16 presets @ 328IT [48KHzl
POWER SUPPLY	AC 1 OD-240V I 50-60Hz
DIMENSIONS [MMJ	358 X 330 X 81	418x330x81	528 X 330 X 81	640 X 330 X 81
WEIGHT [KGJ	2,4	3,4	4,4	5,4

The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at any time and without notice.

WARRANTY CONDITIONS

• The product is covered by warranty according to current national and European regulations.
• For detailed warranty conditions and RMA requests please refer to our website: www.karmaitaliana.it – www.glemm.eu
• The warranty covers manufacturing defects and faults that occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
• Damages caused by negligence or wrong use of the device are not covered by warranty.
• The warranty is no longer effective if the item is modified or disassembled by unauthorized people. This warranty doesn’t necessarily envisage the product’s replacement.
• External components, batteries, knobs, switches, and any removable or subject-to-wear-and-tear parts are excluded from the warranty.
• Shipment for the return of faulty items is at the expense and risk of the owner.
• The warranty is effective only upon the exhibition of the invoice or of the purchase receipt.
• If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend saving it.
• We also suggest to register your product on our website www.karmaitaliana.it, after signing in to access the private area. In this way, you will have the possibility to keep track of the warranty validity and to receive updates on our items.

produced by:

• KARMA ITALIANA SRL
• Via Gozzano, 38 bis
• 21052, Busto Arsizio (VA) – Italy
• www.glemm.eu.

Documents / Resources

GLEMM MXP 8C-MXP 10C Multichannel Microphone Mixer [pdf] Instruction Manual 18C_31964, 8C_31961, 10C_31962, 14C_31963, MXP 8C-MXP 10C Multichannel Microphone Mixer, MXP 8C-MXP 10C, Multichannel Microphone Mixer, Microphone Mixer, Mixer

References

• User Manual