Programador SMARTRISE C4 Link 2

Acabadoview

Este documento ofrece instrucións paso a paso para descargar, instalar e usar o programador Link2 con controladores C4. Explica como cargar software no controlador C4 usando o programador Link2.

Required Tools for Software Programming

As seguintes ferramentas son necesarias para programar o software:

1.  Un portátil cun sistema operativo baseado en Windows.
2. O programador de Link2.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webligazón para acceder ao software e ás impresións máis recentes.

Application Download Instructions

Para cargar o software no controlador Smartrise, a aplicación de programación debe estar descargada no portátil. Esta aplicación está dispoñible na unidade flash. Siga estes pasos para descargar a aplicación C4 Link2 Programmer:

1. Abra a unidade flash.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Localiza e abre a carpeta C4 Programmer.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Para garantir un funcionamento axeitado, o software do controlador debe cargarse no controlador Smartrise mediante o programador Link2. Siga os pasos seguintes para completar o proceso:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Busca o software do controlador:
   1. Open (1) – Controller Software.
   2. Seleccione o cartafol co nome do traballo.
   3. Escolla o coche para o que desexa cargar o software.
   4. Fai clic en Seleccionar cartafol na parte inferior da xanela.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • SR. A: SR. MCUA
      • SR. B: SR. MCUB
      • SRU A: CT e COP MCUA
      • SRU B: CT e COP MCUB
      • Placa elevadora/de expansión: Placa elevadora/de expansión

As conexións do procesador pódense atopar na placa.

Start the software loading process by clicking the Start button.

Importante: Ao programar a MR SRU, outros coches do grupo poden verse afectados. Para evitalo, desconecte os terminais do grupo na placa.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

NOTA: Se o software non se descarga, probe o seguinte:

1. Retry the process.
2. Usa un porto USB diferente.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Reinicie o portátil.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Desprázate ata view todas as opcións e confirme que se mostra a versión esperada.

FAQ

P: Que debo facer se atopo erros durante a carga do software?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Documentos/Recursos

Programador SMARTRISE C4 Link 2 [pdfInstrucións Programador C4 Link 2, C4, Programador Link 2, Programador

Referencias

• Manual de usuario