IDEC FC6A-J8A1 Vol. de 8 puntostagGuía do usuario do módulo de entrada de corrente

IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
Esta guía explica como conectar o PLC IDEC FC6A Plus a AWS IoT Core.

Descrición do hardware

Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1

Elementos proporcionados polo usuario
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.

Artigos comprables por terceiros
Ningún

Configura o teu entorno de desenvolvemento

Instalación de ferramentas (IDEs, Toolchains, SDK)
O software WindLDR é necesario para programar a aplicación PLC. IDEC ofrece o paquete Automation Organizer, que inclúe o software WindLDR. O número de peza para mercar Automation Organizer é SW1A-W1C. Consulte cun distribuidor de IDEC ou cun vendedor en liña autorizado.
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C

Set Up Device Hardware

<Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A.
<Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).

Set up your AWS account and permissions

If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:

Rexístrese para obter unha conta de AWS
Crear un usuario administrativo
Open the AWS IoT Console

Crea recursos de AWS IoT

Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:

Create an AWS IoT policy
Create a Thing object

Proporcione o dispositivo con credenciais

Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file para o FC6A e a clave privada file, así como como importalos ao FC6A.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTTAWSIoTCoreTraining.pdfcontext=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Build the Demo

Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Executar a demostración
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.

Verifique as mensaxes en AWS IoT Core

Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Resolución de problemas

Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Para obter máis información, consulte a documentación en liña de AWS sobre a resolución de problemas de AWS IoT.

Preguntas frecuentes

What is the power supply requirement for IDEC FC6APlus?

The IDEC FC6A Plus requires a 24V DC power supply.

Where can I find the necessary software for programming the PLC application?

You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.

Which Ethernet port should be used for connecting to AWS IoT Core?

Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.

Documentos/Recursos

IDEC FC6A-J8A1 Vol. de 8 puntostage Módulo de entrada de corrente [pdfGuía do usuario
FC6A-J8A1 Vol. 8 puntostage Modulador de entrada de corrente, FC6A-J8A1, Vol. de 8 puntostage Mod. de entrada de corrente, volumetage Mod. de entrada de corrente, Mod. de entrada de corrente, Mod. de entrada, Mod.

Referencias

Manual de usuario

IDEC FC6A-J8A1 Vol. de 8 puntostage Módulo de entrada de corrente

Acabadoview