JOYO JF-16 British Sound Amp Manual de instrucións do pedal simulador

1. Produto rematadoview

The JOYO JF-16 British Sound Amp Simulator Pedal is a guitar effect pedal designed to emulate the tones of classic British amplifiers. It offers a range of tones from bluesy overdrive to powerful rock sounds, providing versatility for various musical styles. This pedal features true bypass to maintain signal integrity when disengaged.

Imaxe 1.1: Arriba view of the JOYO JF-16 British Sound Pedal.

2. Información de seguridade

• Ensure proper power supply (DC 9V, center negative) to avoid damage to the pedal.
• Always connect the guitar fully to the pedal before playing to prevent unexpected noise.
• Avoid using the pedal in extremely hot, cold, humid, or dusty environments.
• Do not disassemble or attempt to repair the pedal yourself. Refer to qualified service personnel.

3. Contido do paquete

The bundle includes:

• JOYO JF-16 British Sound Amp Pedal do simulador
• DC 9V Power Supply (800mA - 1A) AC Adapter

Note: Items may be shipped separately.

4. Controis e funcións

Imaxe 4.1: En ángulo view of the JOYO JF-16 British Sound Pedal showing controls and jacks.

• Botón BAIXO: Axusta a resposta de baixa frecuencia.
• Botón MID: Adjusts the mid-range frequency response.
• Botón HIGH: Axusta a resposta de alta frecuencia.
• Mando de NIVEL: Controls the overall output volume of the effect.
• Botón VOICE: Shapes the tonal character, simulating different ampvoicings vitalizadores.
• Botón de control: Adjusts the amount of gain/distortion.
• INTERRUPTOR DE PÉ: Engages or bypasses the effect. Features true bypass.
• Toma de entrada: 1/4-inch mono audio input for your guitar.
• Toma de saída: 1/4-inch mono audio output to your amplificador ou seguinte pedal.
• Entrada DC 9V: Power input for a 9V DC center-negative adapter.

5. Configuración

1. Connect your guitar to the INPUT jack of the JF-16 pedal using a standard 1/4-inch instrument cable.
2. Connect the OUTPUT jack of the JF-16 pedal to your ampa entrada do lificador ou o seguinte pedal na túa cadea de sinal.
3. Connect the DC 9V power adapter to the pedal's power input. Ensure the adapter meets the specified requirements (9V DC, center negative, 800mA - 1A).
4. Acende o teu ampmáis vivo.

Image 5.1: The JOYO JF-16 pedal integrated into a guitar setup.

6. Instrucións de funcionamento

1. Engage/Bypass: Press the footswitch to toggle the effect on or off. The LED indicator will illuminate when the effect is active.
2. Axuste do ton: Use the LOW, MID, and HIGH knobs to sculpt your desired EQ. Experiment with these controls to match your guitar and amplifier characteristics.
3. Setting Gain: Turn the DRIVE knob clockwise for more distortion and sustain, or counter-clockwise for cleaner tones.
4. Voicing the Amp: The VOICE knob allows you to fine-tune the amplifier's tonal character. This control is crucial for achieving specific British amp sounds, from classic blues-rock to aggressive hard rock.
5. Control de volume: Adjust the LEVEL knob to set the overall output volume of the pedal. Ensure the volume is balanced with your bypassed signal or other effects.

7. Power Supply Information

The JOYO JF-16 pedal requires a DC 9V power supply with a center-negative polarity. The recommended current draw is between 800mA and 1A. Using an incorrect power supply can damage the unit and void the warranty.

Image 7.1: Diagram illustrating the DC 9V power adapter specifications (5.5x2.1mm, tip negative).

Imaxe 7.2: Interna view of a power adapter with Smart IC Control for protection against over-current, over-temp, over-voltage, e curtocircuítos.

8. Noise Reduction Tips

• Ensure your electric guitar circuits are properly shielded and have a ground wire.
• Use high-quality instrument cables to minimize signal interference.
• Verifique que o seu amplifier has a proper ground connection.
• Be aware that some pickups, especially single-coil pickups in high-gain settings, can naturally produce more noise.
• Consider using a dedicated power supply designed for guitar pedals to reduce noise disturbance.

9. Especificacións

10. Mantemento

• Clean the pedal regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the pedal to moisture or extreme temperatures.
• Store the pedal in a dry, cool place when not in use.
• Periodically check all cable connections for wear and tear.

11 Solución de problemas

• Sen son: Check all cable connections, power supply, and ensure the pedal is engaged. Test with different cables and a different power supply if possible.
• Ruído/zunido excesivo: Refer to the "Noise Reduction Tips" section. Ensure proper grounding and use high-quality cables. Test in a different electrical outlet.
• Weak/Distorted Sound (unexpectedly): Check your guitar's battery (if active pickups), cable integrity, and amplifier settings. Adjust the pedal's LEVEL and DRIVE knobs.
• O LED non se acende: Verify the power supply connection and ensure it meets the correct specifications.

12. Garantía e soporte

For any product issues or support inquiries, please contact the seller directly through your order details on Amazon. This is the fastest and most effective way to receive assistance.

Image 12.1: The JOYO pedal is compatible with various brands of effect pedals and keyboards.