PIX LINK 2800M WiFi Repeater User Manual

Introdución

Welcome to the user manual for your PIX LINK 2800M WiFi Repeater. This device is designed to extend the range of your existing wireless network, eliminating Wi-Fi dead zones and providing a stronger, more reliable signal throughout your home or office. Please read this manual carefully before using the device.

Información de seguridade

• Non expoña o dispositivo á auga nin á humidade.
• Non intente desmontar ou reparar o dispositivo vostede mesmo.
• Use only the power adapter provided or recommended by the manufacturer.
• Manteña o dispositivo lonxe de fontes de calor e da luz solar directa.
• Asegúrese de ventilar adecuadamente o dispositivo para evitar o sobreenriquecido.

Contido do paquete

• 1 x PIX LINK 2800M WiFi Repeater
• 1 x cable Ethernet
• 1 x Guía de instalación rápida

Produto rematadoview

The PIX LINK 2800M WiFi Repeater features four external antennas for enhanced signal coverage and stability. It supports multiple operating modes to suit various networking needs.

Esta imaxe mostra a parte dianteira view of the PIX LINK 2800M WiFi Repeater. It is a white rectangular device with four adjustable external antennas, two on each side. The front panel displays the "2800M" model number and "Wi-Fi" logo.

Configuración

Configuración do modo repetidor

1. Plug the repeater into a power outlet near your existing router.
2. Wait for the power indicator light to stabilize.
3. On your computer or mobile device, connect to the repeater's default Wi-Fi network (e.g., "PIXLINK_XXXX").
4. Abrir a web navegador e introduza o enderezo IP predeterminado (por exemplo, 192.168.1.254) ou nome de dominio (por exemplo, ap.setup).
5. Inicia sesión co nome de usuario e contrasinal predeterminados (normalmente administrador/administrador).
6. Follow the on-screen wizard to select "Repeater Mode".
7. Choose your existing Wi-Fi network from the list and enter its password.
8. Configure the repeater's Wi-Fi name (SSID) and password, or keep them the same as your main network.
9. Save the settings and wait for the repeater to restart.
10. Relocate the repeater to a suitable location between your router and the Wi-Fi dead zone for optimal signal extension.

AP Mode Setup (Access Point)

1. Plug the repeater into a power outlet.
2. Connect the repeater to your router using an Ethernet cable.
3. Follow steps 3-6 from Repeater Mode Setup.
4. Select "AP Mode" and configure the new Wi-Fi network name (SSID) and password.
5. Save the settings and wait for the repeater to restart.

En funcionamento

Once configured, the PIX LINK 2800M WiFi Repeater will automatically extend your wireless network.

Luces indicadoras

• LED de enerxía: Solid green indicates the device is powered on.
• LED WLAN: Blinking indicates active wireless data transmission.
• LED LAN: Solid green indicates an active Ethernet connection.
• LED de sinal: Indicates the strength of the signal received from the main router (e.g., green for strong, yellow for medium, red for weak).

Mantemento

• Manteña o dispositivo limpo e libre de po. Use un pano suave e seco para limpalo.
• Non bloquee os orificios de ventilación do dispositivo.
• Comprobe periodicamente se hai actualizacións de firmware no dispositivo do fabricante websitio para garantir un rendemento e seguridade óptimos.

Resolución de problemas

No Internet Access After Setup

• Ensure the repeater is within effective range of your main router.
• Verify that you entered the correct Wi-Fi password for your main network during setup.
• Tenta reiniciar tanto o enrutador principal como o repetidor.
• Check the Signal LED on the repeater; if it's red, move the repeater closer to the main router.

Non se pode acceder Web Páxina de xestión

• Ensure your device is connected to the repeater's Wi-Fi network or via Ethernet.
• Verify the IP address or domain name entered in the browser.
• Tenta limpar a caché do teu navegador ou usar un navegador diferente.
• Reset the repeater to factory defaults (refer to the Quick Installation Guide for specific instructions) and try setup again.

Especificacións

Garantía e Soporte

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official PIX LINK websitio.

For further assistance, contact PIX LINK customer service through their official channels.