Produto rematadoview
The Oregon Scientific BAR218HG WeatheratHome Wireless Weather Station provides comprehensive local weather monitoring with Bluetooth connectivity. It displays indoor and outdoor temperature and humidity, a 12-24 hour weather forecast, and moon phase. The device also features weather alerts for conditions like heat, fog, frost, rain, and wind storms. Its clock function automatically syncs with your smartphone for accurate timekeeping, including daylight saving adjustments. The accompanying mobile application allows for monitoring of up to 5 locations, viewing 7-day history, and data logging.
Figura 1: Fronte view of the Oregon Scientific BAR218HG Weather Station, showing its main display with outdoor and indoor readings, weather forecast, and control buttons.
Contido do paquete
- BAR218HG Main Unit
- One THGN132N Wireless Outdoor Temperature/Humidity Sensor
- Manual de usuario (este documento)
- Batteries (not included, requires 4 AA batteries for main unit, 2 AAA batteries for sensor - typical)
Configuración
1. Instalación da batería
- Abra a tapa do compartimento das baterías na parte traseira da unidade principal.
- Introduza 4 pilas AA, respectando a polaridade correcta (+ e -).
- Pecha a tapa do compartimento da batería.
- For the THGN132N sensor, open its battery compartment and insert 2 AAA batteries, observing polarity.
- Close the sensor's battery compartment.
2. Colocación do sensor
Place the THGN132N wireless sensor outdoors in a shaded area, away from direct sunlight and heat sources, to ensure accurate temperature and humidity readings. The transmission range is up to 150 feet (45 meters) from the main unit.
3. Sincronización inicial
Upon battery installation, the main unit will automatically search for the outdoor sensor. Ensure the sensor is within range. The outdoor temperature and humidity should appear on the main unit's display within a few minutes.
4. Conexión da aplicación (Bluetooth)
- Download the "Weather@Home" app from your smartphone's app store.
- Activa o Bluetooth no teu smartphone.
- Open the Weather@Home app and follow the on-screen instructions to pair with your BAR218HG unit.
- Once connected, the app will sync the time to the weather station and allow you to view detailed data and history.
Funcionamento da estación meteorolóxica
Mostrar información
The main unit's display shows the following information:
- Outdoor Temperature and Humidity: Lecturas actuais do sensor sen fíos.
- Temperatura e humidade interiores: Current readings from the main unit's internal sensors.
- Previsión meteorolóxica de 12 a 24 horas: Graphical representation (sunny, cloudy, rainy, etc.).
- Fase da Lúa: Current moon phase.
- Tempo: Current time, synced via app.
- Alerta de xeo: Indication for potential ice conditions.
- Bluetooth Connectivity Icon: Indicates connection status with the app.
- Sensor Signal Strength: Indicates connection quality with the outdoor sensor.
Botóns e funcións
- MODO: Cycles through display modes or enters settings.
- LUZ: Activa a retroiluminación LED.
- MEM: Displays minimum/maximum temperature and humidity readings.
- Frechas cara arriba/abaixo: Used for adjusting settings or navigating menus.
Usando a aplicación móbil
The Weather@Home app provides enhanced functionality:
- View temperature and humidity from up to 5 locations (with additional sensors).
- Access 7-day history of temperature and humidity data.
- Data logging capabilities.
- Sincronización horaria automática.
- Easy labeling feature for different sensor locations.
Mantemento
- Limpeza: Limpe a unidade principal e o sensor cun pano suave eamp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Substitución da batería: Replace batteries in both the main unit and the sensor when the low battery indicator appears on the display or in the app.
- Colocación do sensor: Periodically check the outdoor sensor's placement to ensure it remains protected from direct elements and is providing accurate readings.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen lectura de temperatura/humidade exterior. | Sensor out of range or batteries low/dead. | Move sensor closer to the main unit. Replace sensor batteries. Re-synchronize the sensor (refer to setup section). |
| Inaccurate outdoor readings. | Sensor exposto á luz solar directa ou a fontes de calor. | Coloca o sensor nunha zona sombreada e ben ventilada. |
| Problemas de conexión Bluetooth. | Bluetooth off on phone, app not running, or unit too far. | Ensure Bluetooth is enabled on your device. Restart the app. Bring your device closer to the weather station. |
| A pantalla está en branco ou escura. | Main unit batteries are low or dead. | Replace the main unit batteries. |
Especificacións
- Modelo: BAR218HG
- Marca: Oregon Scientific
- Dimensións do produto: 18.59 x 9.4 x 5.41 cm
- Peso do artigo: 222 g
- Material: Policarbonato (PC)
- Fonte de enerxía: Battery Powered (Main Unit: 4 AA batteries, Sensor: 2 AAA batteries - typical)
- Conectividade: Bluetooth v4.0
- Rango de transmisión: Ata 150 pés (aproximadamente 45 metros)
- Características especiais: Clock, Lightweight, Weather Alert, 7-day Data Logger, LED Backlight
Garantía e Soporte
Información da garantía
Os detalles específicos da garantía adoitan incluírse na embalaxe do produto ou na ficha oficial do fabricante. websitio. Consulte a documentación incluída coa súa compra para obter os termos e condicións de garantía máis precisos e actualizados.
Atención ao cliente
For technical assistance, troubleshooting, or inquiries regarding your Oregon Scientific BAR218HG Weather Station, please visit the official Oregon Scientific support website or contact their customer service department. Contact information can usually be found on the product packaging or their websitio.
Nota: Additional sensors (e.g., BTHGN129, THN132N, THGR122NX) can be purchased separately to expand monitoring capabilities up to 5 locations.
