Wall Mounted Key Safe with Numeric Code

1. Introdución

The AIDAPT Wall Mounted Key Safe with Numeric Code is a secure and weather-resistant key storage system designed for outdoor use. It provides a safe location to store a spare key for your home or car, offering an ideal solution if you accidentally lock yourself out or need to grant access to a neighbor or service provider in your absence. This key safe features a 10-digit lock with easy-to-use buttons, a keyring for attaching multiple keys, and a removable rubber cover for added protection. You can set your own custom code.

Figura 1: Fronte view of the AIDAPT Wall Mounted Key Safe, showing the 10-digit keypad and open/clear buttons.

2. Configuración e instalación

The key safe is designed for quick and easy wall mounting. Complete installation instructions and all necessary fixings are supplied with the product.

2.1 Contido do paquete

• Wall Mounted Key Safe Unit
• Parafusos de montaxe e tacos de parede
• Removable Rubber Weather Cover
• Manual de instrucións (este documento)

2.2 Escolla un lugar de instalación

Select a discreet, secure, and easily accessible location for mounting the key safe. Ensure the surface is solid and can support the weight of the safe and its contents. The weather-resistant design allows for outdoor installation.

2.3 Instrucións de montaxe

1. Open the Key Safe: Enter the default code (if any, refer to the included paper manual for initial code) or the current code to open the safe. The front panel will detach, revealing the mounting holes.
2. Marcar os puntos de perforación: Hold the key safe against the desired wall location. Use a pencil to mark the positions of the mounting holes on the wall.
3. Perforación: Using an appropriate drill bit for your wall type (e.g., masonry bit for brick/concrete), drill holes at the marked positions.
4. Inserir tacos de parede: Insira os tacos de parede proporcionados nos orificios perforados.
5. Protexer a caixa forte: Align the key safe with the wall plugs and secure it using the provided screws. Ensure it is firmly attached to the wall.
6. Attach Rubber Cover: Place the removable rubber cover over the back of the safe for enhanced weather protection, especially for outdoor installations.

Figure 2: The key safe with its front panel detached, showing the internal mechanism and mounting points.

Figura 3: Parte dianteira e traseira views of the key safe, highlighting the removable rubber weather cover.

3. Funcionamento

The key safe operates using a 10-digit numeric keypad. You can set a custom code of your choice.

3.1 Setting Your Code

Refer to the detailed instructions provided in the physical manual that came with your key safe for specific steps on how to set or change your numeric code. This process typically involves a reset lever or button located inside the safe.

3.2 Opening the Key Safe

1. Clear Previous Entry: Slide the "CLEAR" button (usually a lever or switch) downwards to reset the keypad.
2. Enter Your Code: Press the buttons corresponding to your chosen numeric code. The order of pressing the numbers does not typically matter for this type of lock, only that the correct numbers are pressed.
3. Open the Safe: Slide the "OPEN" button (usually a lever or switch) downwards. The front panel should release, allowing you to access the key compartment.
4. Retrieve/Store Key: Access the key attached to the keyring inside the safe.

Figure 4: A user's hands interacting with the keypad to enter the code and open the key safe.

3.3 Closing and Locking the Key Safe

To close the key safe, simply align the front panel with the main body and press it firmly until it clicks into place. The safe will automatically lock once the panel is securely re-attached.

4. Mantemento

The AIDAPT Key Safe is designed for durability and minimal maintenance.

• Limpeza: Wipe the exterior of the key safe with a damp cloth to remove dirt or debris. Avoid using abrasive cleaners or solvents that could damage the finish or rubber cover.
• Cuberta de goma: Ensure the removable rubber cover is properly seated, especially if the safe is exposed to the elements, to maintain its weather-resistant properties.
• Comprobación do mecanismo: Periodically check the keypad buttons and the "OPEN" and "CLEAR" levers for smooth operation. If they become stiff, a small amount of silicone-based lubricant can be applied, avoiding contact with the code-setting mechanism.
• Seguridade de montaxe: Occasionally check the mounting screws to ensure the safe remains securely attached to the wall.

5 Solución de problemas

If you encounter issues with your key safe, refer to the following common problems and solutions:

5.1 Key Safe Will Not Open with Correct Code

• Ensure "CLEAR" is Used: Always slide the "CLEAR" button before entering your code to reset any previous button presses.
• Press Buttons Firmly: Ensure each number button is pressed fully and registers.
• Slide "OPEN" Fully: After entering the code, ensure the "OPEN" lever is slid completely downwards.
• Mechanism Jamming: If the mechanism feels stiff or jammed, gently try to operate the "OPEN" and "CLEAR" levers. Avoid excessive force.
• Code Order: For this type of lock, the order of the numbers in your code typically does not matter, only that the correct combination of buttons is pressed. However, ensure you are pressing all the numbers that form your set code.

5.2 Front Panel Detaches or is Difficult to Re-attach

• Aliñación adecuada: Ensure the front panel is perfectly aligned with the main body before pressing it back into place.
• Presión firme: Apply even, firm pressure until you hear a click, indicating it is securely locked.
• Comproba se hai obstáculos: Ensure no debris or foreign objects are preventing the panel from seating correctly.

5.3 Forgotten Code

Importante: This key safe model typically does not have a code recovery or override function if the code is forgotten. It is crucial to keep a record of your code in a secure location separate from the key safe. If the code is lost, the safe may need to be professionally opened or replaced.

5.4 Buttons or Levers Feel Loose/Fragile

• This may indicate wear and tear. While the product is designed to be robust, prolonged heavy use or exposure to extreme conditions can affect components.
• If the functionality is compromised, consider replacing the unit to maintain security.

6. Especificacións

7. Garantía e soporte

7.1 Información da garantía

Specific warranty details for your AIDAPT Wall Mounted Key Safe are typically provided with your purchase documentation. Please refer to the warranty card or information included in the product packaging for terms, conditions, and duration of the warranty. Keep your proof of purchase for any warranty claims.

7.2 Atención ao cliente

For further assistance, technical support, or inquiries regarding your AIDAPT product, please visit the official AIDAPT websitio web ou póñase en contacto co seu departamento de atención ao cliente. A información de contacto adoita atoparse na embalaxe do produto ou na páxina oficial da marca. websitio.

Fabricante: Axuda
Marca: AIDAPT