1. Produto rematadoview
The Pentair IntelliTouch ScreenLogic Wireless Connection Kit (Model 520639) enables wireless communication between your IntelliTouch control system's power center and your home's wireless router, facilitating remote control of your pool and spa functions. This kit is designed to extend the reach of your existing ScreenLogic Interface Kit and Protocol Adapter (sold separately).
2. Características clave
- High-powered wireless connection.
- Facilitates wireless connection from the control system's power center to a remote ScreenLogic Protocol Adapter and wireless router.
- Enhances remote management capabilities for IntelliTouch systems.
3. Contido do paquete
The Pentair IntelliTouch ScreenLogic Wireless Connection Kit typically includes the following components:
- Wireless Transceiver (Outdoor Unit)
- Wireless Receiver (Indoor Unit)
- Adaptador de alimentación
- Cables de conexión
4. Configuración e instalación
Información importante de seguridade
Installation should only be performed by qualified professionals. Ensure all power to the pool/spa control system is turned off before beginning installation.
Compoñentes rematadosview
Pasos de instalación
- Desconexión de alimentación: Turn off all power to the pool/spa control system at the main breaker. Verify that all power is off before proceeding.
- Outdoor Transceiver Placement: Mount the outdoor wireless transceiver near the IntelliTouch power center, ensuring it has a clear line of sight to the indoor receiver if possible, or at least an unobstructed path for wireless signal.
- Indoor Receiver Placement: Install the indoor wireless receiver in a location near your wireless router and a power outlet.
- Wiring the Outdoor Transceiver: Connect the outdoor transceiver to the IntelliTouch power center according to the wiring diagram provided in your IntelliTouch system manual.
- Wiring the Indoor Receiver: Connect the indoor receiver to your wireless router using an Ethernet cable and to a power outlet using the provided power adapter. Connect the serial connection from the indoor receiver to the ScreenLogic Protocol Adapter (sold separately).
- Restauración de enerxía: Once all connections are secure, restore power to the pool/spa control system.
- System Pairing/Configuration: Follow the instructions in your ScreenLogic Interface Kit manual to pair the wireless components and configure the system for network access.
5. Operating the Wireless Connection Kit
Once installed and configured, the ScreenLogic Wireless Connection Kit allows you to control your pool and spa functions remotely via the Pentair ScreenLogic app on your smartphone or tablet, or through a web navegador.
Control remoto a través da aplicación
The Pentair ScreenLogic app provides an intuitive interface to manage various pool and spa settings.
- Accessing Functions: Open the app and select the desired function (e.g., filter pump, cleaner, lights, heater, spa jets).
- Axuste de configuración: Modify temperature, run times, and other parameters as needed.
- Estado de seguimento: View current pool and spa temperatures, equipment status, and system alerts.
Wireless Control Panel (if applicable with EasyTouch)
If you have a Pentair EasyTouch Control System with a compatible wireless control panel, the wireless connection kit extends its functionality, allowing you to operate your pool and spa from a portable remote.
- Sincronización: The wireless control panel will synchronize with the main control box, displaying current temperatures and operational status.
- Activación da función: Press the corresponding buttons on the wireless panel to activate or deactivate pool/spa features.
6. Mantemento
The Pentair IntelliTouch ScreenLogic Wireless Connection Kit requires minimal maintenance.
- Inspección periódica: Periodically check all cables and connections for signs of wear or damage.
- Actualizacións de firmware: Ensure your ScreenLogic Protocol Adapter and app are updated to the latest firmware/software versions for optimal performance and security.
- Protección ambiental: Ensure the outdoor transceiver is protected from extreme weather conditions as much as possible, though it is designed for outdoor use.
7 Solución de problemas
Problemas comúns e solucións
| Problema | Causa posible | Solución |
|---|---|---|
| Sen conexión sen fíos | Poder outage, loose cable, out of range, network issue. | Check power to all components. Ensure cables are securely connected. Verify wireless signal strength. Restart router and pool control system. |
| App Not Syncing/Updating | Outdated app/firmware, server issues, poor internet connection. | Update the ScreenLogic app and Protocol Adapter firmware. Check your home internet connection. Contact Pentair support if server issues persist. |
| Conexión intermitente | Wireless interference, distance from router/power center. | Relocate the indoor receiver closer to the router or the outdoor transceiver. Minimize interference from other wireless devices. |
| Incorrect Temperature Readings | Faulty temperature sensor (not directly related to wireless kit, but a common pool system issue). | Consult your IntelliTouch system manual for sensor troubleshooting. |
Nota: For complex issues or if you are unsure about any step, it is recommended to contact a qualified pool technician or Pentair customer support.
8. Especificacións
- Dimensións do produto: 12 x 7 x 3 polgadas
- Peso do artigo: 1.72 libras
- Fabricante: Pentair
- Número de modelo: 520639
- Compatibilidade: Pentair IntelliTouch automation systems (requires ScreenLogic Interface Kit and Protocol Adapter, sold separately).
9. Garantía e soporte
For warranty information and technical support, please refer to the documentation included with your complete Pentair IntelliTouch system or visit the official Pentair website. Keep your purchase receipt and model number handy when contacting support.
