GEPRC GEP-35A-F7 AIO Flight Controller Instruction Manual

GEP-35A-F7 AIO Flight Controller

Product Specifications:

  • Model Name: GEP-35A-F7
  • MCU: STM32F722
  • IMU: MPU6000 gyro/accelerometer(SPI)
  • Firmware target: GEPRCF722
  • OSD: Betaflight OSD w/ AT7456Ev
  • Current Sensor: Yes
  • OSD Support: Yes
  • Beeper: Yes
  • LED: Yes
  • USB: micro USB
  • BEC Output: 5V @ 1A
  • Integrated LC Filter
  • ESC MCU: BB21F16G
  • Continuous Current: 35A
  • Max Current: 45A (10s)
  • Input: 2~6S
  • Supports: Dshot600, Oneshot, Multishot
  • Current Meter: 210
  • Target: G_H_30
  • Size: 32x32mm
  • Board Installing Hole: 26.5×26.5mm, M2
  • Weight: 8.3g

Product Usage Instructions:

  1. Installation:

    – Ensure the ESC MCU is securely connected to the flight
    controller.

  2. Configuration:

    – Connect the micro USB to a compatible power source.

    – Use Betaflight OSD for configuration settings.

  3. Powering On:

    – Apply power within the input range of 2~6S for optimal
    performance.

  4. Flying:

    – Check all connections and settings before flight.

    – Utilize Dshot600, Oneshot, or Multishot as per your
    preference.

Frequently Asked Questions (FAQ):

Q: How do I update the firmware on the GEP-35A-F7?

A: To update the firmware, connect the device to a computer
using the micro USB cable and use Betaflight Configurator to flash
the latest firmware.

Q: What is the recommended input voltage range for the
GEP-35A-F7?

A: The recommended input voltage range is between 2 and 6 cells
(2~6S) for optimal performance.

Q: How can I check the current consumption of my drone with the
GEP-35A-F7?

A: The GEP-35A-F7 features a current meter that can be monitored
through the Betaflight OSD during flight.

“`

R001
R001
100
100

7

TEW27330000

SPECS:
Model NameGEP-35A-F7 MCU:STM32F722 IMU:MPU6000 gyro/accelerometer(SPI) Firmware targetGEPRCF722 OSD:Betaflight OSD w/ AT7456Ev CurrentYES OSDYES BeeperYES LEDYES USBmicro USB BEC output5V@1A

Intergrated LC Filter ESC MCUBB21F16G Continuous current35A MAX current45A (10s) Input2~6S SupportsDshot600,Oneshot,Multishot Current meter210 TragetG_H_30 Size32x32mm Board Installing Hole26.5×26.5mm,M2 Weight8.3g

TX4 RX4
27 TEW330000

GEP-F7-35A

100

GEP-F7-35A

27 000 TEW330

$-* TFUTFSJBMSY@IBMGEVQMFY0/ TFUTFSJBMSY@JOWFSUFE0/ TBWF
27 000 TEW330

CH1

27 000 TEW330

CH2

27 000 TEW330

100

100

100

27 000 TEW330

100
TX4 RX4

27 000 TEW330
100 100

27 000 TEW330

100

TX4 RX4
TX4 RX4
27 000 TEW330
27 000 TEW330
GPS
RX TX GND +5V
GPS

100

Documents / Resources

GEPRC GEP-35A-F7 AIO Flight Controller [pdf] Instruction Manual
GEP-35A-F7, TEW27330000, R001, GEP-35A-F7 AIO Flight Controller, GEP-35A-F7, AIO Flight Controller, Flight Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *