GenerLink 2507 Transfer Switch User Guide

 GenerLink-LOGO GenerLink 2507 Transfer Switch

 GenerLink-2507-Transfer-Switch-PRODUCT

Product Specifications

  • Product Name: GenerLink
  • Manufacturer: Global Power Products
  • Model: 2507
  • Power Source: Generator
  • Maximum Distance for Cord: 20 feet

Product Usage Instructions

Installation

  1. Turn off the main breaker and all individual breakers.
  2. If you have solar panels, ensure they are turned off.
  3. Locate the GenerLink connector on the cord and align it with the guide on the outlet.
  4. Plug the cord into the bottom of the GenerLink until you hear a click.
  5. Connect the other end of the cord to the generator (maintain a minimum distance of 20 feet) and ensure the breaker is in the ON position.

Operation

  1. Start up the generator and wait for the blue LED next to the Alternate Source to illuminate.
  2. Turn on the breakers for essential items in your household.
  3. Finally, turn on the main breaker to fully power your home with the generator.

HOW TO USE

  1. First, TURN OFF the main breaker and all individual breakers. GenerLink-2507-Transfer-Switch-FIG-1
  2. If you have solar panels, be sure to turn them off. (If you do not have solar panels, move to step 3.)  GenerLink-2507-Transfer-Switch-FIG-2
  3. Find the GenerLink connector, attached to the cord, and align the thumb with the guide.
    • Align notch with the front centre of the GenerLink outlet  GenerLink-2507-Transfer-Switch-FIG-3
  4. Plug the cord into the bottom of the GenerLink until you hear a click.  GenerLink-2507-Transfer-Switch-FIG-4
  5. Plug the cord into the generator. (20 feet minimum distance) Ensure the breaker is in the on position.
  6. Start-up generator and wait for the blue LED next to “Alternate Source” to light up. GenerLink-2507-Transfer-Switch-FIG-5
  7. Turn on breakers to essential items.  GenerLink-2507-Transfer-Switch-FIG-6
  8. TURN ON the main breaker.  GenerLink-2507-Transfer-Switch-FIG-7

How to Safely Disconnect Your Portable Generator When Power is Restored

  1. Once the utility power is restored, SHUT DOWN the generator. GenerLink-2507-Transfer-Switch-FIG-8
  2. Unplug the cord from the Generlink and the portable generator.
    • NOTE: You will experience a few seconds of a power outage as the GenerLink switches back to utility power.  GenerLink-2507-Transfer-Switch-FIG-9
  3. TURN ON all individual breakers in the panel.  GenerLink-2507-Transfer-Switch-FIG-10

Safely Disconnecting

  1. Once utility power is restored, shut down the generator.
  2. Unplug the cord from the GenerLink and the portable generator.
  3. Turn on all individual breakers in the panel to resume the normal power supply.

Frequently Asked Questions

Can I use GenerLink with solar panels?

Yes, you can use GenerLink with solar panels. Make sure to turn them off before connecting the generator.

What should I do if there is a power outage while using GenerLink?

If there is a power outage, follow the steps to safely Disconnect your portable generator when power is restored.

How do I know if GenerLink is working correctly?

Check for the blue LED next to Alternate Source; if it lights up, GenerLink is functioning properly.

Documents / Resources

PDF thumbnail2507 Transfer Switch
User Guide · 2507, 2507 Transfer Switch, 2507, Transfer Switch, Switch

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.