Generic DC-RF-2DC RF Mini Led Controller Instruction Manual

GenerC-LOGO

Generic DC-RF-2DC RF Mini Led Controller

Generic-DC-RF-2DC-RF-Mini-Led-Controller-PRODUCT

OVERVIEW

Compact RF controller designed to manage one type of light bar with dimmer control, offering simple operation, diversified dynamic modes, and a soft dimming effect.

PRODUCT OVERVIEW

Generic-DC-RF-2DC-RF-Mini-Led-Controller-FIG-1

Product Features

The products of this series can be used to control one type of light bar: Dimmer

The main features of the controller are:

  • Compact body and convenient wiring;
  • Simple and easy operation, comfortable button feel;
  • Diversified dynamic modes;
  • Soft dimming effect;

Technical Parameters

Working temperature -20-60 ℃
Input voltage DC5~24V
Controller size L52×W22×H13mm
Net weight 14/21 keys 30g
Gross weight 14/21keys 32g
RF frequency 433.92Mhz
Output current max:6A
Single color 1CH*6A, RGB: 3CH*2A, RGBW : 6A
Output power 5V:<30W, 12V:<72W, 24V:<144W
Remote battery 1PCS*CR2025 lithium cell

Products Key Diagram

Generic-DC-RF-2DC-RF-Mini-Led-Controller-FIG-2

Remember to remove the plastic tab.

DIM Mode Sheet

Mode 1 Mode 2 Mode 3
Jump Fade Strobe

*Note: 14-key DIM default pass code for product delivery:

  1. If one-to-one codes are required, the controller is powered off and powered on again. Press and hold the power on key, and the light strip flashes white light to check the code successfully.
  2. If a pair of multi-pass codes is required, the controller is powered Off and powered on again. Long press the power off key, and the light strip flashes white light to clear the code successfully.

Follow steps below to pair a new remote:

  1. Disconnect the receiver from power, reconnect within 5 sec.
  2. Press “on”button for 2 seconds, and the receiver will recognize the new remote controller.

Attention

  1. Controller’s input voltage is DC5-24V, never connect to others or AC220V, PIs do not overload, the total max output current is 6A;
  2. Before using the infrared remote, the insulating film should removed.
  3. Please don’t reverse the power input connection of both cathode and anode, please switch on again only when it is in right connection and no short circuit.

Connection Description

Generic-DC-RF-2DC-RF-Mini-Led-Controller-FIG-4

Documents / Resources

PDF thumbnailDC-RF-2DC RF Mini Led Controller
Instruction Manual · LED dimmer controller, 14 keys, 21 keys, 433.92MHz, DC5-24V, Max 6A, RF Mini LED Controller, LED dimmer, DC-RF-2DC RF Mini Led Controller, DC-RF-2DC, RF Mini Led Controller, Led Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.