Generic CLASSIC C1 Dual Knobs User Manual

Home

Tip: The Ul Interface Style May Vary Depending On The Configuration And Motherboard Model
THE DIAGRAM IS FOR REFERENCE ONLY.

Application Center

Tip: The Ul Interface Style May Vary Depending On The Configuration And Motherboard Model THE DIAGRAM IS FOR REFERENCE ONLY
Tip: Different Countries and Regions Have Different Pre Installed Apps

Apple CarPlay

CarPlay Connection Steps – ZLINK5

Featured Functions

Installation Precautions

Installation Requirements For Disassembling & Assembling The Original Vehicle Host

1. In order to ensure safety and normal use of the product, it is recommended that it be installed by professional technical personnel who sell this product to avoid machine damage and accidents.
2. During the entire installation process, the original vehicle key must be removed to avoid short circuits, Confusion of original vehicle data, and other phenomena.
3. During the installation process, all components removed from the original vehicle should be placed in a safe place to avoid scratching the dashboard inside the vehicle. Any debris left during wiring should be promptly disposed of and the joints must be insulated to prevent short circuits
4. During the disassembly and assembly process, the original vehicle wiring should not be damaged or cause a short circuit. The wiring should not be connected incorrectly during installation, as incorrect connections can have adverse consequences, otherwise faults may occur After each wire hamess is routed, it needs to be securely feed to prevent loosening

Installation Requirements For Navigation Antenna

1. When installing the navigation antenna, seperate the navigation antenna from the power line, and route it away from the data signal line inside the car to prevent signal interference. It is recommended to place the navigation antenna below the windshield on the right side of the car, which must be horizontally placed and facing the sky in order to receive signals better.

Warning: This navigation host must not be plugged or unplugged with power to avoid data loss.

Device Wiring Diagram

Tip: Different Configurations Determine The Shape of The Heat Dissipation Cover, And The Position of The interface on The Heat Dissipation Cover Will Not be The Same THE DIAGRAM IS FOR REFERENCE ONLY.

Specification