ABS RFID Keypad Reader
Product Information
Specifications
- Compliance: FCC approved
- Radiation Exposure Limits: Complies with FCC limits for
uncontrolled environments - Minimum Distance: 20cm between the radiator and body
Product Usage Instructions
Installation
1. Ensure the equipment is placed in an area with a minimum
distance of 20cm between the radiator and your body.
2. Connect the equipment to a power source following the
manufacturer’s instructions.
Operation
1. Turn on the equipment using the designated power button.
2. Follow the specific operation instructions provided in the
user manual for your intended use.
Maintenance
1. Regularly clean the equipment following the cleaning
guidelines provided by the manufacturer.
2. Avoid exposing the equipment to extreme temperatures or
moisture.
FAQ
Q: Can I modify the equipment?
A: Any changes or modifications not approved by the responsible
party can void your authority to operate the equipment.
Q: What should I do if the minimum distance of 20cm cannot be
maintained?
A: It is crucial to adhere to the minimum distance requirement
to ensure safe operation. If maintaining this distance is not
possible, consider relocating the equipment to a suitable
location.
FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC warning – English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. – French: L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Documents / Resources
 |
GEM ONE ABS RFID Keypad Reader [pdf] User Manual ABS, ABS RFID Keypad Reader, RFID Keypad Reader, Keypad Reader, Reader |