TCP8020 Wired PTZ Wi-Fi Camera
Product Information
Specifications:
- Compliance: FCC Part 15
- Operation Conditions: Must not cause harmful interference; Must
accept any received interference
Product Usage Instructions
Installation:
- Place the device on a stable surface.
- Connect the power source to the device.
- Follow any additional installation steps provided in the
manual.
Operation:
- Turn on the device using the power button.
- Follow the on-screen instructions for initial setup.
- Use the device according to its intended purpose.
Maintenance:
- Regularly clean the device with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or
moisture. - Refer to the manual for any specific maintenance
requirements.
Frequently Asked Questions (FAQ)
Q: What should I do if the device stops working suddenly?
A: Check the power source and connections. If the issue
persists, contact customer support for assistance.
Q: How can I reset the device to its factory settings?
A: Refer to the user manual for instructions on resetting the
device to factory settings.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ISED Statement
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). – French: Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillageradi oélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations Cet équipement est conforme Canada limites d’exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.
Documents / Resources
 |
geeni TCP8020 Wired PTZ Wi-Fi Camera [pdf] User Manual 2BMOF-TCP8020, 2BMOFTCP8020, tcp8020, TCP8020 Wired PTZ Wi-Fi Camera, TCP8020, Wired PTZ Wi-Fi Camera, PTZ Wi-Fi Camera, Wi-Fi Camera, Camera |