GEBERIT 131.002.SJ.6 Monolith Sanitary Module for Floor Standing WC
Product Usage Instructions
Installation
- Choose the appropriate location for the floor-standing WC module.
- Ensure proper alignment and secure the module in place.
- Connect the necessary plumbing according to local regulations.
Operation
- Use the flush buttons or controls provided to activate flushing.
- Adjust the flush volume as needed using the adjustment range specified.
- Maintain the module by cleaning regularly with recommended products.
FAQs
Q: Can I install this product myself?
A: Installation of the Geberit Monolith sanitary module is recommended to be done by a professional plumber to ensure proper setup and functionality.
Q: How do I adjust the flush volume?
A: To adjust the flush volume, refer to the user manual for specific instructions based on your model. Typically, there are controls or settings provided for adjusting the flush volume as needed.
Application purposes
- For floor inlets
- For renovations, conversions, and new buildings
- For wall inlets with an inlet height of 18 cm
- For floor-standing WCs with P-bend and water inlet height 32–36 cm above the floor (EN 33)
- For replacing low-level exposed cisterns
- For replacing floor-standing WCs with close-coupled exposed cistern For connecting Geberit AquaClean Tuma WC complete solution, floor-standing WC
- For connecting Geberit AquaClean WC enhancement solutions, with accessories
- For mounting on finished floors
- For installation in front of drywalls or solid walls
- Compensation of dimensional tolerances possible
- Cistern, fully insulated against condensation
- Side cladding made of aluminium brushed
- Self-supporting
- Adjustable flush volume
- Water supply connection on the bottom
- Water supply connection on the left/right possible with accessories
Characteristics
- Dual flush
Scope of delivery
- Water supply connection set with 2 angle stop valves, 1/2″
- Flush bend extension 160 mm
- Sleeve made of EPDM, ø 44 / 55 mm
- Connection bend made of PP, ø 90 mm
- Adaptor socket made of PE-HD, ø 90 / 110 mm
- Base cover
- Fastening material for drywall
- Fastening material
| Art. no. | Colour/surface | B | H | T |
| 131.002.00.5 | Front cladding: Stoneware slate look Side cladding: black chrome aluminium | 48 cm | 101 cm | 10.6 cm |
| 131.002.JV.5 | Front cladding: Stoneware concrete look Side cladding: aluminum | 48 cm | 101 cm | 10.6 cm |
Technical data
| Flow pressure | 0.1–10 bar |
| Operating temperature, water max. | 25 °C |
| Flush volume, factory setting | 6 / 3 l |
| Flush volume large, adjustment range | 4.5 / 6 l |
| Flush volume small | 3 l |
Accessories
- Set of fixing bolts made of aluminium, for Geberit Monolith side cladding
- Conversion set for Geberit AquaClean WC enhancement solutions
- Lateral water supply connection set for Geberit Monolith sanitary module for WC
DIMENSION
The color and structure of natural products may vary
Documents / Resources
 |
GEBERIT 131.002.SJ.6 Monolith Sanitary Module for Floor Standing WC [pdf] Owner's Manual 131.002.SJ.6, 131.002.00.5, 131.002.JV.5, 131.002.SJ.6 Monolith Sanitary Module for Floor Standing WC, 131.002.SJ.6, Monolith Sanitary Module for Floor Standing WC, Sanitary Module for Floor Standing WC, Floor Standing WC, Standing WC |
