GE APPLIANCES PHP9030ST 30 Inch Built-In Touch Control Induction Cooktop Installation Guide

PHP9030ST 30 Inch Built-In Touch Control Induction Cooktop

Specifications:

  • Brand: GE Profile
  • Model: PHP9030ST
  • Type: Built-In Touch-Control Induction Cooktop
  • Dimensions: 30 inches
  • Power Rating: 240V – 7.4 kW, 208V – 6.4 kW
  • Amps: 240V – 40 Amps, 208V – 40 Amps

Product Usage Instructions:

Installation:

Ensure a 3-inch free area between the bottom of the cooktop and
any combustible material. If installing above a wall oven, refer to
specific installation instructions. A 15-inch minimum clearance is
required from the cooktop to adjacent overhead cabinets. Units come
with a 48-inch flexible armored cable for connection.

Cutout Filler Trim Kit:

If your countertop cutout is larger than the standard dimension,
up to 29-13/16 x 20-7/16, you can use the filler trim kit. Order
JXTR32B for black or JXTR32W for white to reduce the cutout opening
for installation.

Approximate Cooking Dimensions:

Refer to the provided dimensions for the optimal placement of
the cooktop. Ensure minimum clearances are maintained from walls,
countertops, and cabinets.

Installation Above a Wall Oven:

Specific dimensions and clearances are required if installing
the cooktop above a wall oven. Follow the guidelines provided to
ensure proper installation.

FAQ:

Q: Can this cooktop be connected to Wi-Fi and Bluetooth?

A: Yes, this cooktop features Wi-Fi and Bluetooth connectivity
for enhanced control and functionality.

Q: Is the cooktop ADA compliant?

A: Yes, this cooktop is ADA compliant, meeting accessibility
standards.

Q: Are there any optional accessories available for this
cooktop?

A: Optional accessories such as a filler trim kit (JXTR32B),
Sous Vide Probe (JXPROBE1), and Smart Cookware Rebate are available
to enhance your cooking experience.

“` [pdfjs-viewer url=”/m/5f91bfbd0c3ecccf52ffb0e24a51db9ee9946ada9b078987b6a0bb03ce650822_optim.pdf” viewer_width=100% viewer_height=800px fullscreen=true download=true print=true]

PHP9030ST
GE ProfileTM 30″ Built-In Touch-Control Induction Cooktop

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

IMPORTANT: Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE: 30″ induction cooktops are approved for use over select GE 27″ and GE 30″ Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2″ minimum flat countertop surface and 25″ minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your countertop cutout is larger than the dimension shown, up to 29-13/16″ x 20-7/16″. Order JXTR32B for black or JXTR32W for white, to reduce the cutout opening for installation of this cooktop. These kits may be ordered from your GE Appliances Dealer.

APPROXIMATE COOKING DIMENSIONS

13″ MAX. depth of unprotected overhead cabinets

4-5/8″ at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4″ at rear of air intake

29-7/8″

21″

Cooktop

1-3/4″ MIN. to rear wall

19-1/4″

28-1/16″
19-5/8″ to 19-3/4″

28-1/2″ to 28-5/8″

2-1/2″ MIN. Required
To insure accuracy, it is best to make a template when cutting the opening in the counter

30″ MIN. Clearance from countertop to unprotected overhead surface
See label next to nameplate for MIN. clearance to rear wall.
2″ MIN. clearance to side wall from cut-out on the left of the unit

2″ MIN. Clearance from cutout to nearest vertical wall or cabinet on right side of the unit below the 15″ MIN. clearance height.
15″ MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop

INSTALLATION ABOVE A WALL OVEN
2-1/2″ MIN
From front edge of countertop to front edge of cooktop cutout
31-1/4″ MIN
From top surface of countertop to top surface of wall oven support
platform

KW RATING 240V 7.4 208V 6.4 AMPERAGE 240V 40 Amps 208V 40 Amps

NOTE: Check local codes for required breaker size.

For answers to your Monogram, GE CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

ADA
COMPLIANT

Listed by Underwriters Laboratories

Specification Revised 03/23

PHP9030ST
GE ProfileTM 30″ Built-In Touch-Control Induction Cooktop

FEATURES AND BENEFITS Maximum Responsiveness – 19 Control Levels Power Boil Precision Temperature Control Easy Clean Surface Safe Surface Most Efficient Heating Synchronized Elements Chef Connect Smart Cookware Rebate for 11″ Smart Pan Timer Built-in WiFi Control Lock Fit Guarantee Model PHP9030STSS ­ Stainless Steel

Melt Warm

Induction

HOT

HOT

High

Melt

Warm

Sync Burners
Wi-Fi Connect
HOT
Bluetooth Connect

Low

High

o F C APP PREHEATING

Precision Cooking

o F C APP PREHEATING

TAP COOKWARE SET TEMP

HR

MIN

HOT

Low

Timer Cancel Hold 3 Sec

High

High

Lock Controls Hold 3 Sec
All Off

SMART COOKWARE REBATE Smart pans pair with this smart cooktop to ensure you get the perfect cooking results. Earn a rebate for a free 11″ Hestan Cue Smart Pan.
OPTIONAL FILLER TRIM KIT Fill in any counter top gaps with this filler trim kit. Order part number JXTR32B.
OPTIONAL SOUS VIDE PROBE A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
GUARANTEED FIT Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications.
Visit geappliances.com for more info.

Specification Revised 03/23

Documents / Resources

GE APPLIANCES PHP9030ST 30 Inch Built-In Touch Control Induction Cooktop [pdf] Installation Guide
PHP9030ST 30 Inch Built-In Touch Control Induction Cooktop, PHP9030ST, 30 Inch Built-In Touch Control Induction Cooktop, Touch Control Induction Cooktop, Control Induction Cooktop, Induction Cooktop

References

Leave a comment

Your email address will not be published. Required fields are marked *