GE APPLIANCES PHP7036DTBB 36 Built In Touch Control Induction Cooktop Installation Guide

PHP7036DTBB 36 Built In Touch Control Induction Cooktop

Specifications:

  • Model: PHP7036DT
  • Brand: GE ProfileTM
  • Type: Built-In Touch-Control Induction Cooktop
  • Dimensions: 36 inches
  • Power Rating: 240V 11.6 KW, 208V 10.1 KW
  • Amps: 240V 50 Amps, 208V 50 Amps
  • Wi-Fi Connect: Yes
  • Bluetooth Connect: Yes

Installation Instructions:

Important Notes:

  • Requires a 3-inch free area between the bottom of the cooktop
    and any combustible material.
  • Requires a 15-inch minimum distance from cooktop to adjacent
    overhead cabinets.
  • Units come with a 48-inch flexible armored cable.

Above a Wall Oven:

  • Minimum clearance from front edge of countertop to front edge
    of cooktop cutout: 2-1/2 inches.
  • Maximum depth of unprotected overhead cabinets: 13 inches.
  • Check local codes for required breaker size.

Features:

  • Induction cooking technology
  • Wi-Fi and Bluetooth connectivity
  • Precision cooking settings
  • Smart cookware compatibility
  • Melt and boil settings
  • Optional Sous Vide Probe available (part number JXPROBE1)

Product Usage Instructions:

  1. Ensure proper installation following the provided
    guidelines.
  2. Connect the cooktop to a compatible power source.
  3. Use the touch controls to select desired cooking settings.
  4. Utilize the precision cooking features for accurate temperature
    control.
  5. For smart cookware pairing, ensure compatibility and follow
    instructions for setup.
  6. Refer to the user manual for specific cooking instructions and
    safety precautions.

FAQ:

Q: Can I use non-compatible cookware with this induction
cooktop?

A: It is recommended to use smart cookware that
pairs easily with the cooktop for optimal results. Non-compatible
cookware may not work efficiently.

Q: What should I do if the cooktop is not connecting to
Wi-Fi or Bluetooth?

A: Check the connectivity settings on the
cooktop and ensure proper network connections. Refer to the user
manual for troubleshooting tips or contact customer support for
assistance.

“` [pdfjs-viewer url=”/m/a0f5c7808855ace83fbb58f7a5b8d90d55d28ae4294bcfc6918c59132476bd56_optim.pdf” viewer_width=100% viewer_height=800px fullscreen=true download=true print=true]

PHP7036DT
GE ProfileTM 36″ Built-In Touch-Control Induction Cooktop

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

IMPORTANT: Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE: 36″ induction cooktops are approved for use over select GE 30″ Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2″ minimum flat countertop surface and 25″ minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.

APPROXIMATE COOKING DIMENSIONS

4-5/8″ at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4″ at rear of air intake

36″

20-1/2″

Cooktop

18-7/8″

33-3/4″
19-1/8″ to 19-1/4″

1-3/4″ MIN. to rear wall

33-7/8″ to 34″

2-1/2″ MIN. Required
To insure accuracy, it is best to make a template when cutting the opening in the counter
INSTALLATION ABOVE A WALL OVEN
2-1/2″ MIN
From front edge of countertop to front edge of cooktop cutout

31-1/4″ MIN
From top surface of countertop to top surface of wall oven support
platform

13″ MAX. depth of unprotected overhead cabinets
30″ MIN. Clearance from countertop to unprotected overhead surface See label next to nameplate for MIN. clearance to rear wall.
2″ MIN. clearance to side wall from cut-out on the left of the unit

2″ MIN. Clearance from cutout to nearest vertical wall or cabinet on right side of the unit below the 15″ MIN. clearance height.
15″ MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop

KW RATING 240V 11.6 208V 10.1 AMPERAGE 240V 50 Amps 208V 50 Amps

NOTE: Check local codes for required breaker size.

For answers to your Monogram, GE CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

ADA
COMPLIANT

Listed by Underwriters Laboratories

Specification Revised 10/22

PHP7036DT
GE ProfileTM 36″ Built-In Touch-Control Induction Cooktop

FEATURES AND BENEFITS Maximum Responsiveness – 11 Control Levels Power Boil Precision Temperature Control Easy Clean Surface Safe Surface Most Efficient Heating Synchronized Elements Chef Connect Compatible Cooktop with Smart Timer Built-in WiFi Control Lock Fit Guarantee Model PHP7036DTBB ­ Black on black

Induction

Wi-Fi Connect
Bluetooth Connect

Low

Low

HOT

HOT

HOT

High

High

Melt

Low

HOT

High

o F C APP PREHEATING

Precision Cooking

o F C APP PREHEATING

TAP COOKWARE SET TEMP

HR

MIN

HOT

Low

Timer Cancel Hold 3 Sec

High

High

Lock Controls Hold 3 Sec
All Off

Melt

COMPATIBLE COOKTOP WITH SMART COOKWARE Smart pans easily pair with this smart cooktop to ensure you get the perfect cooking results. Accessories sold separately.
OPTIONAL SOUS VIDE PROBE A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
GUARANTEED FIT Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications.
Visit geappliances.com for more info.

Specification Revised 10/22

Documents / Resources

GE APPLIANCES PHP7036DTBB 36 Built In Touch Control Induction Cooktop [pdf] Installation Guide
PHP7036DTBB, PHP7036DT, PHP7036DTBB 36 Built In Touch Control Induction Cooktop, PHP7036DTBB, 36 Built In Touch Control Induction Cooktop, Touch Control Induction Cooktop, Induction Cooktop, Cooktop

References

Leave a comment

Your email address will not be published. Required fields are marked *