GE APPLIANCES PHP7030DT 30 Inch Built-In Touch Control Induction Cooktop
Product Specifications
- Model: PHP7030DT
- Brand: GE ProfileTM
- Type: Built-In Touch-Control Induction Cooktop
- Dimensions: 30 inches
- Power Rating: 240V – 7.7 KW, 208V – 6.9 KW
- Ampere Rating: 240V – 40 Amps, 208V – 40 Amps
- Features: Melt, Warm, Wi-Fi Connect, Bluetooth Connect, Precision Cooking, Induction, Sous Vide Probe Compatibility.
DIMENSIONS AND INSTALLATION INFORMATION
IMPORTANT: Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing a wall oven underneath the cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE: 30″ induction cooktops are approved for use over select GE 27″ and GE 30″ single-wall ovens and Warming Drawers. Refer to the cooktop and wall oven/warming drawer installation instructions packed with the product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with the product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2” minimum flat countertop surface and 25” minimum total countertop depth. In addition, other clearances to the front edge of the countertop must be considered. Before installing, consult the installation instructions packed with the product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your countertop cutout is larger than the dimension shown, up to 29-13/16″ x 20-7/16″. Order JXTR32B for black or JXTR32W for white, to reduce the cutout opening for installation of this cooktop. These kits may be ordered from your GE Appliances Dealer.
APPROXIMATE COOKING DIMENSIONS
INSTALLATION ABOVE A WALL OVEN
NOTE: Check local codes for required breaker size.
| KW RATING | |
| 240V | 7.7 |
| 208V | 6.9 |
| AMPERAGE | |
| 240V | 40 Amps† |
| 208V | 40 Amps† |
FEATURES AND BENEFITS
- Maximum Responsiveness – 11 Control Levels Power Boil
- Precision Temperature Control
- Easy Clean Surface
- Safe Surface
- Most Efficient Heating
- Synchronized Elements
- Chef Connect
- Compatible Cooktop with Smart
- Timer
- Built-in WiFi
- Control Lock
- Fit Guarantee
- Model PHP7030DTBB – Black on black
COMPATIBLE COOKTOP WITH SMART COOKWARE
Smart pans easily pair with this smart cooktop to ensure you get the perfect cooking results. Accessories sold separately.
OPTIONAL SOUS VIDE PROBE
A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
OPTIONAL FILLER TRIM KIT
Fill in any countertop gaps with this filler trim kit. Order part number JXTR32B.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications. Visit geappliances.com for more info.
Frequently Asked Questions
What should I do if the cooktop is not heating?
Check that the cookware is induction-compatible and properly placed on the cooking zone. Also, ensure the power supply is connected correctly.
Can I use this cooktop with non-smart cookware?
Yes, you can use non-smart cookware on the cooktop; however, smart pans are recommended for best results.
Documents / Resources
 |
GE APPLIANCES PHP7030DT 30 Inch Built-In Touch Control Induction Cooktop [pdf] Installation Guide PHP7030DT 30 Inch Built-In Touch Control Induction Cooktop, PHP7030DT, 30 Inch Built-In Touch Control Induction Cooktop, Touch Control Induction Cooktop, Control Induction Cooktop, Induction Cooktop |