PureMate 46-Inch Oscillating Tower Fan
Model No: PM 746
Instruction Manual
Introduction
Thank you for purchasing the innovative PureMate 46-Inch Oscillating Tower Fan. We wish you many years of healthy indoor air with this efficient and effective product.
Safety Operation
Ensure that all safety precautions are followed when using electrical appliances for the proper operation of the device. This instruction booklet describes the safety precautions to be observed during operation to prevent injuries to yourself, other persons, and damage to the device. The content is suitable for this product and electrical appliances in general.
Safety Instructions
- To avoid fire or shock hazard, plug the appliance directly into a 220-240V AC electrical outlet.
- Disconnect the power plug before dismantling, assembling, or before cleaning.
- Keep the unit away from heated surfaces and open flames.
- To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water. ⚠️
- Children cannot recognize the hazards associated with the usage of electrical appliances. For this reason, always supervise children when they are near the unit.
- Always unplug the tower fan before moving it, opening the aroma box, cleaning, or whenever the tower fan is not in use. Be sure to pull by the plug and not the cord.
- NEVER drop or insert any object into any openings.
- DO NOT run the cord under carpeting. DO NOT use outdoors.
- DO NOT cover the cord with throw rugs, runners, or similar coverings.
- DO NOT route the cord under furniture or appliances. Arrange the cord away from traffic areas and where it will not be tripped over.
- DO NOT operate any appliance with a damaged cord or plug, if the motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Please Call Customer Service for assistance.
- DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user-serviceable parts. All servicing should be performed by qualified personnel only.
- Do not operate the appliance with wet hands, in order to avoid damage.
- Do not knock or shake the body of the tower fan when in use, otherwise it may cause it to stop.
- Disconnect the power plug before dismantling, assembling, or before cleaning.
- Never insert fingers, pencils, or any other objects through the guards.
- Do not use the appliance for any other purpose than its intended use.
- The fan must not be used if the guards are not fastened according to instructions.
Components
Diagram Description: Two diagrams of the tower fan are shown. The left diagram displays the main body and base, with labels pointing to 'Control Panel', 'Display Panel', 'Air Outlet', and 'Base'. The right diagram shows the fan body and base, with labels pointing to 'Remote Control Store', 'Cable Tidy', and 'Air Inlet'.
Assembly Instructions
The base of the power fan comes in two parts, which fit around the oscillation base. Both parts fit easily together.
- First, attach the front half of the base, aligning the holes in the base with the screw hole in the oscillation base and lead the power cord up the base.
- Connect the back half of the base to the front half and secure with the plastic screw nut (supplied) and twist it clockwise (Figure 1).
- Plug into an appropriate power supply.
Diagram Description: The assembly process is illustrated in four steps. Step 1 shows the separated base parts. Step 2 shows the two halves of the base. Step 3 shows the base assembled, with the fan body being inserted or attached. Step 4 shows the fully assembled tower fan. Arrows indicate the direction of assembly.
Control Panel & Remote Control
Diagram Description: The control panel is a circular interface on top of the tower fan, featuring a large central power button, surrounded by smaller buttons for Speed, Timer, and Mode. The remote control is a handheld device with buttons for Power, Speed, Oscillation (OSC), Timer, and Mode.
Operating Instructions
POWER: ⚡
Turns the tower fan power ON/OFF.
- Press the POWER button. The device starts operating.
- Press POWER again and the device will stop working.
SPEED: ?
Press to adjust between 3 fan speeds: Low, Medium, or High.
MODE:
Press to choose from 4 different modes:
- NORMAL MODE: Fan will blow at any speed you select.
- NATURAL MODE: Fan will start to cycle through the 3 speeds, starting at high speed (5s), middle speed (5s), and Low speed (5s).
- SLEEP MODE: ? If you set the mode at high speed, the fan will work at high speed for 30 minutes, then transfer to middle speed for 30 minutes, and transfer to Low speed until the fan stops working.
- CHILD MODE: ? Fan will automatically set up the timer at 3 hours and the oscillation function will start. The fan will work at high speed for 15 minutes, transfer to medium speed for 15 minutes, and then transfer to low speed until the timer has reached 0.
TIMER: ⏰
Press to activate the timer. Each time the button is pressed, the time will increase in increments of 1 hour up to a maximum of 12 hours.
OSCILLATION: 〰️
Press to activate the oscillation function. Press again to stop the oscillation function.
IMPORTANT NOTE: The display will turn off after 3 minutes of no interaction, entering 'sleep mode'. To exit 'sleep mode', press any button on the control panel or remote control.
Cleaning and Maintenance
- Always disconnect the cord from the electrical outlet when cleaning your fan.
- Light accumulated dust may be removed from the fan with a soft cloth or vacuum cleaner using the dusting brush attachment.
- Wipe the exterior surfaces of the fan occasionally with a cloth moistened (not dripping wet) with a mild soap solution. Dry the case thoroughly with a soft dry cloth before operating the fan.
- Avoid the use of gasoline, benzine, thinner, etc., as they may result in damage to the fan.
- Store the fan in a clean dry place when not in use.
CAUTION! ⚠️ Do not immerse the unit in water or allow water to drip into the interior of the fan housing, as this could create a fire or electric shock hazard.
Accessory
Screws for assembling the base, Remote control, User Manual.
Warranty & Service
This product is covered with a PureMate product and labour warranty for 12 months from the date of its original purchase. If any problems occur, please contact the PureMate Customer Care Centre in your country via the contact information listed in this User Guide. PureMate can only provide after-sales service for products sold by PureMate or PureMate authorized retailers and distributors. If you purchased your unit from a different place, please contact your seller for return and warranty issues.
Specifications
| Attribute | Details |
|---|---|
| Rated Voltage | 220-240V~50-60Hz |
| Power Consumption | 45W (High Setting) |
| Noise Level | Low: 43dB(A), High: 53dB(A) |
| Product Size | 31.5 X 31.5 X 117 cm |
| Net Weight | 3.66 kg |
| Certifications | UKCA, CE, Rohs |
| Warranty | 1 Year |
Disposal of This Device
At the end of the product life cycle, you should not throw this machine into the normal household garbage but bring the product to a collection point for the recycling of electrical and electronic equipment.
Diagram Description: [Recycling Symbol] - A symbol indicating that the device should not be disposed of with regular household waste, depicting a crossed-out wheelie bin.
Contact Information
Manufacturer: Super Tech Health Limited
Address: 129 Shady Lane, Great Barr, Birmingham, West Midlands, B44 9ER, United Kingdom
Website: WWW.PUREMATE.CO.UK
© Copyright 2021
PureMate
