Sònrachaidhean

• Product: Eliot Original Rotary Controller
• Tionndadh: 07/2025
• Barantas: 5 bhliadhna
• Cleachdadh san amharc: Àiteachan oifis tioram

Innealan

Pàirtean

Leabhar-làimhe Co-chruinneachadh

Step 1 | install battery
Open the two covers of the Rotarycontroller and follow the instructions to install two AAA batteries. (1)
Then reinstall the two covers of the Rotarycontroller.

Step 2 | Connect
Plug the Wireless Receiver into the Controlbox of the Eliot Original desk.

Step 3 | Mounting
Mount the receiver under the table top using the enclosed screw. Secure the cable with the cable clip.

Cleachd

• Up Raise the desk
  Press the Rotary controller and turn it clockwise. The desk will rise.
  Release to stop at the desired height.
• Down lower the desk
  Press the Rotary controller and turn it counterclockwise. The desk will lower. Release to stop at the desired height.

Set 2 Memory Positions

• Move desk to the desired height.
• Press and hold the controller for 5 seconds.
• The Rotarycontroller vibrates once to prompt to set the current position as the „memory position 1“.
• To set memory position 2 move desk to desired height.
• Double-click and press the controller for 5 seconds.
• The remote control vibrates twice to prompt to set the current position as the „memory position 2“.

Cleachd Gnìomh Cuimhne

• To reach memory position 1:
• Double-click and press the controller while rotating clockwise, and the desk will stop after reaching memory position 1.
• To reach memory position 2:
• Double-click and press the controller while rotating counterclockwise.
• The desk will stop after running to memory position 2.
  Thoir an aire: During operation, before the actuator moves to the memory position, any action such as turning left, turning right or pressing the controller will stop the current operation.

Rabhadh / Stiùireadh Sàbhailteachd

1. Make sure to have followed all caution/safety instructions from the Eliot Original height-adjustable desk original user & assembly instructions.
2. When using the Rotarycontroller, the user must pay full attention and make sure that no person can be injured or object damaged in the process.
3. If the product is visibly damaged, it may not be installed or used.
4. Cùm a h-uile pàirt dealain air falbh bho liquids.
5. Do not open any of the electrical components. There is a danger of electrical shock.
6. Any changes made to the standard configuration of the handset will invalidate all liability or warranty claims.
   Every person responsible for this desk, at instal-lation or operating of the desk, in daily use or in service and repair work, must have access to these instructions and read them carefully. Keep these instructions close to your height-adjustable desk.

Barantas & Buailteachd

Barantas: 5 bhliadhna
This Rotary controller is designed for use in dry office areas only.
Tha cleachdadh sam bith eile an urra ris an neach-cleachdaidh fhèin.
Chan eil an neach-dèanamh ann an suidheachadh sam bith a’ gabhail ri tagraidhean barantais no tagraidhean buailteachd airson milleadh air adhbhrachadh le bhith a’ cleachdadh no a’ làimhseachadh an rianadair gu neo-iomchaidh.

Ceistean Cumanta

For additional support please visit: https://smartfurniture.zendesk.com

Smartfurniture GmbH | Bodenseestr. 228 | 81243 München www.eliotfurniture.com | taic@smartfurniture.de

Batteries should not be disposed with household waste. They should be segregated and brought to an appropriate collection point for recycling. Smartfurniture GmbH will also accept the batteries for recycling.
For more informations contact your local authorities.