phrozen Sonic Mega 8K S LCD / MSLA Resin 3D Clò-bhualadair Leabhar-làimhe Cleachdaiche

1. Ro-ràdh

Fàilte gu leabhar-làimhe an neach-cleachdaidh airson an inneal ùr agad phrozen Sonic Mega 8K S LCD/MSLA Resin 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity. Please read this manual thoroughly before operating the device.

2. Fiosrachadh Sàbhailteachd

Tha do shàbhailteachd air leth cudromach. Feuch an lean thu na stiùiridhean sàbhailteachd a leanas:

• Cleachd am clò-bhualadair ann an àite le deagh fhionnarachadh an-còmhnaidh gus nach anail thu ceò roisinn.
• Wear appropriate personal protective equipment (PPE), including nitrile gloves agus glainneachan sàbhailteachd, when handling liquid resin or uncured prints.
• Avoid direct skin and eye contact with liquid resin. In case of contact, wash immediately with soap and water. Seek medical attention if irritation persists or if resin gets into eyes.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place in its original sealed container.
• Do not dispose of liquid resin down drains. Cure any waste resin under UV light before disposing of it as solid waste according to local regulations.
• Dèan cinnteach gu bheil am clò-bhualadair air uachdar seasmhach, rèidh.
• Na cuir suathadh air pàirtean gluasadach rè obrachadh.
• Tarraing am pluga den chlò-bhualadair a-mach às an t-socaid cumhachd mus dèan thu obair-chàraidh no glanadh sam bith.

3. Pasgan-susbaint

Nuair a dh’fhosglas tu am bogsa, dèan cinnteach gu bheil na nithean a leanas uile air an toirt a-steach:

• phrozen Sonic Mega 8K S 3D Printer
• Tog plàta
• Resin Vat
• Adaptor cumhachd agus càball
• USB Drive (with user manual and test files)
• Gloves (as listed in "whats_in_the_box")
• Scraper plastaig
• Scraper meatailt
• Funail
• Spare FEP Film
• Tool Kit (Allen wrenches, screws)

4. Toradh thallview

The phrozen Sonic Mega 8K S is a high-resolution LCD/MSLA resin 3D printer designed for rapid production and intricate detail. It features a large 15-inch monochrome LCD screen and a spacious build volume, making it ideal for printing multiple models or large-scale projects.

Prìomh fheartan:

• Unparalleled Productivity: High-speed system and large build plate allow for efficient batch printing, such as 80 detailed 1/32 scale models in under 1.5 hours.
• Revolutionary Production Efficiency: Combined with advanced ACF film and potent TR300 Resin, achieve speeds up to ten times faster than mid-size printers.
• Streamlined Convenience with Lift-Up Lid: The ingenious lift-up lid design optimizes space utilization and provides easy access to prints.
• Efficient Resin Management: A built-in metal drip hanger helps preserve resin post-printing and ensures safety during build plate cleaning.
• Exquisite 8K Printing Precision: Achieve extraordinary levels of intricacy with 8K resolution, capturing every nuance without compromising efficiency.

Figure 4.1: Phrozen Sonic Mega 8K S 3D Printer with a large printed model.

Figure 4.2: Key features of the Phrozen Sonic Mega 8K S.

Figure 4.3: Mass production capability with the 15-inch building plate.

Figure 4.4: Comparison of specifications between Sonic Mega 8K S and Sonic Mighty 8K.

Bhidio Oifigeil Bathar:

Bhidio 4.1: Toradh oifigeil seachadview of the phrozen Sonic Mega 8K S, showcasing na feartan agus na comasan aige.

5. Suidhich

Follow these steps for the initial setup of your printer:

1. Unboxing: Carefully remove the printer and all accessories from the packaging. Inspect for any damage during transit.
2. Suidheachadh: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat.
3. Ceangal cumhachd: Connect the power adapter to the printer and then to a suitable power outlet. Do not power on yet.
4. Stàlaich Build Plate: Secure the build plate onto the Z-axis arm. Ensure it is firmly attached.
5. Stàlaich Vat roisinn: Place the resin vat onto the LCD screen platform. Ensure it is seated correctly and securely.
6. Z-Axis Calibration (Leveling):
   • Fuasgail na sgriothan air a’ phlàta togail.
   • Place a sheet of A4 paper (or the calibration card provided) on the LCD screen.
   • Lower the build plate until it firmly presses against the paper.
   • Tighten the build plate screws while maintaining pressure.
   • Raise the build plate slightly and remove the paper.
   • Confirm the Z-axis home position through the printer's touchscreen menu.
7. A’ luchdadh roisinn: Once leveled, carefully pour the desired resin into the resin vat, ensuring it does not exceed the maximum fill line.

6. Stiùireadh Obrachaidh

To begin printing, follow these general steps:

1. Ullaich Modail 3D: Use a compatible slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model. This involves adding supports, orienting the model, and setting print parameters (layer height, exposure time, lift speed, etc.) according to your resin and desired print quality.
2. Slice Model: Slice the prepared model into layers and save it as a `.ctb` or compatible file format onto the provided USB drive.
3. Cuir a-steach draibh USB: Cuir an draibh USB a-steach do phort USB a’ chlò-bhualadair.
4. Select and Start Print: On the printer's touchscreen, navigate to the "Print" menu, select your file, and confirm to start the printing process.
5. Clò-bhualadh Sgrùdaidh: Observe the first few layers to ensure proper adhesion to the build plate. The printer will automatically proceed with the print.
6. Post-giollachd: Once printing is complete, carefully remove the build plate. Use the metal scraper to detach the print from the build plate. Place the build plate on the drip hanger to allow excess resin to drip back into the vat.
7. Wash and Cure: Wash the uncured print in isopropyl alcohol (IPA) or a dedicated resin cleaner to remove excess liquid resin. After washing, cure the print under UV light (e.g., in a UV curing station) to fully harden it.

7. Cumail suas

Regular maintenance ensures consistent print quality and extends the life of your printer:

• Clean Build Plate: After each print, clean the build plate with IPA and a soft cloth.
• Clean Resin Vat: If changing resin colors or if there are cured resin bits in the vat, carefully empty the resin into a separate container (filter if necessary) and clean the vat with IPA and a soft cloth. Inspect the FEP film for damage.
• Inspect FEP Film: Regularly check the FEP film at the bottom of the resin vat for scratches, dents, or cloudiness. Replace it if damaged to prevent print failures and protect the LCD screen.
• Clean LCD Screen: If resin spills onto the LCD screen, immediately clean it with a soft, lint-free cloth and IPA. Avoid using sharp objects or abrasive materials.
• Lubricate Z-Axis: Periodically apply a small amount of lithium grease to the Z-axis lead screw to ensure smooth movement.
• Ùrachaidhean firmware: Check the official phrozen weblàrach-lìn airson ùrachaidhean firmware sam bith a tha rim faighinn gus coileanadh a leasachadh agus feartan ùra a chur ris.

8. A ’dèanamh trioblaid

Seo cuid de chùisean cumanta agus na fuasglaidhean a dh’ fhaodadh a bhith aca:

9. Sònrachaidhean

10. Barantas agus Taic

For detailed warranty information and technical support, please refer to the official phrozen weblàrach no an làrach-lìn coileanta Leabhar-làimhe Cleachdaiche (PDF) provided with your printer. You may also contact Phrozen 3D Printer customer support for assistance.

The product is sold by Phrozen 3D Printer and is fulfilled by Amazon. It typically comes with a 30-day easy return policy.