1. Ro-ràdh
The VEVOR 15x15 Heat Press Machine is designed for efficient and precise heat transfer applications on various materials. This digital industrial sublimation printer is suitable for both heat transfer vinyl (HTV) and sublimation projects, offering fast heating and high-pressure capabilities. This manual provides essential information for safe and effective operation.
Prìomh fheartan:
- 15 x 15 Heat Press: Large heating pad (38 x 38 cm) with sponge, designed for a service life of 20,000 hours. Ensures quicker heating and better transfer effects. Soft heating liner accommodates various materials and reduces odors.
- Digital Control Board: Precise control panel for accurate temperature and time regulation. Features an automatic alarm upon completion. Temperature Range: 0 - 482 ℉ / 0 - 250 ℃; Time Control: 0 - 999 seconds; Power: 1200 W; Voltage: 110 v.
- Teflon Insulation Coating: Revolutionary Teflon material reduces surface temperature for user comfort and minimizes scratches. Lessens adhesion risk between clothes and platen for excellent transfer results.
- Knob cuideam a ghabhas atharrachadh: Full-range knob for increasing no decreasing pressure based on material thickness. Outfitted with a non-slip rubber grip for comfortable use.
- Furasta a chleachdadh: Ideal for creating personalized gifts on T-shirts, pillows, bags, phone shells, and quickly transferring colorful pictures and characters onto textiles like cotton, cloth, HTV, ceramics, glasses, fabrics, flax, and nylon.
2. Stiùireadh Sàbhailteachd Cudromach
- Always operate the heat press on a stable, flat, and heat-resistant surface.
- Keep hands and body clear of the heating plate during operation to prevent burns. The Teflon coating reduces surface temperature but the plate remains hot.
- Ensure proper ventilation in the work area to dissipate any odors or fumes.
- Do not leave the machine unattended while it is powered on or operating.
- Unplug the heat press from the power outlet when not in use or before cleaning/maintenance.
- Cùm a-mach à ruigsinneachd clann is peataichean.
- Use heat-resistant gloves when handling hot materials or adjusting the machine after pressing.
- Avoid overloading electrical circuits. The machine operates at 1200W, 110V.
3. Co-phàirtean toraidh
Familiarize yourself with the main parts of your VEVOR Heat Press machine:
4. Suidhich
- A' dì-phapadh: Carefully remove the heat press from its packaging. Retain all packaging materials for future storage or transport.
- Suidheachadh: Place the machine on a sturdy, flat, and heat-resistant surface. Ensure there is adequate space around the machine for safe operation and ventilation.
- Ceangal cumhachd: Cuir an càball cumhachd a-steach do phuing dealain 110V le talamh.
- Sgrùdadh tùsail: Check all components for any signs of damage. Ensure the heating plate and platen are clean and free of debris.
5. Stiùireadh Obrachaidh
5.1. Setting Temperature and Time:
- Cumhachd air: Flip the red power switch located on the side of the control box to the "ON" position.
- Suidhich Teòthachd: Use the "TEMP" button and the up/down arrows on the digital control board to set the desired temperature (0 - 482 ℉ / 0 - 250 ℃). The machine will begin heating automatically.
- Suidhich ùine: Use the "TIME" button and the up/down arrows to set the desired pressing duration (0 - 999 seconds).
- Teasachadh ro-làimh: Allow the machine to reach the set temperature. The display will show the current temperature rising until it matches the set value.
5.2. A’ cur cuideam air dòigh:
The pressure is adjusted using the full-range knob located on top of the heating plate assembly. Turn the knob clockwise to increase pressure and counter-clockwise to decrease pressure. Adjust based on the thickness of your material and transfer type. Test with scrap material to find the optimal pressure.
5.3. Heat Transfer Process:
- Ullaich stuth: Place your garment or material onto the silicone pad on the lower platen. Smooth out any wrinkles. For best results, pre-press the garment for 3-5 seconds to remove moisture and wrinkles.
- Gluasad Dreuchd: Carefully place your heat transfer vinyl (HTV) or sublimation paper onto the garment in the desired position.
- Cover with Teflon Sheet: Place a Teflon sheet over your transfer and garment. This protects the heating plate and prevents ink transfer.
- Brùth: Lower the heating plate handle until it locks into place. The timer will automatically start counting down.
- Alarm: Once the set time expires, an alarm will sound. Lift the handle to release the pressure.
- Remove Transfer: Carefully remove the Teflon sheet. Depending on your transfer type (hot peel, warm peel, cold peel), wait for the material to cool sufficiently before peeling off the transfer backing.
5.4. Recommended Parameters:
| Stuth | Teacsa | Temp | Uair | Thoir an aire |
|---|---|---|---|---|
| PU HTV | Cotton, polyester, msaa | 150-165 ℃ / 302-329 ℉ | 10-15s | Peel fuar/blàth |
| Glitter HTV | Cotton, polyester, msaa | 155-165 ℃ / 343-361 ℉ | 10-15s | Peel fuar/blàth |
| Pàipear Sublimation | Polyester, Cotton≥30%, etc | 180-200 ℃ / 356-392 ℉ | 40-60s | Peel Fuar |
| Pàipear gluasaid teas (aodach dorcha) | 100% Cotton | 155-165 ℃ / 343-361 ℉ | 10-15s | - |
| Pàipear gluasad teas (aodach aotrom) | 100% Cotton | 155-165 ℃ / 343-361 ℉ | 10-15s | - |
Note: These are general recommendations. Always refer to the specific instructions provided with your transfer materials.
5.5. Bhideothan Oifigeil Bathar:
Bhidio 5.1: Vevor Heat Press 15*15 - This video demonstrates the basic operation of the VEVOR 15x15 heat press, including setting up and performing a heat transfer.
Bhidio 5.2: VEVOR Heat Press 15x15, How to Guide - A detailed guide on how to use the VEVOR 15x15 heat press for various projects.
Bhidio 5.3: VEVOR Heat Press - This video provides a general overview of the VEVOR heat press and its capabilities.
Bhidio 5.4: VEVOR heat press machine for t shirts - A short demonstration of using the VEVOR heat press specifically for T-shirt applications.
6. Cumail suas
- Glanadh: Regularly wipe down the heating plate and silicone pad with a soft, damp cloth after the machine has cooled completely. Do not use abrasive cleaners.
- Teflon Sheet Care: Replace the Teflon sheet if it becomes damaged or excessively dirty to ensure optimal transfer quality and protection for the heating plate.
- Stòradh: Stòraich am preas teas ann an àrainneachd thioram, gun duslach nuair nach eilear ga chleachdadh.
7. A ’dèanamh trioblaid
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Uneven transfer/fading | Incorrect pressure, temperature, or time; moisture in garment. | Adjust pressure knob; verify temperature/time settings; pre-press garment to remove moisture. |
| Inneal gun teasachadh | Power issue, faulty heating element. | Check power connection and outlet; contact customer support if issue persists. |
| Transfers peeling/not adhering | Insufficient heat or pressure; incorrect peel method (hot/cold). | Increase temperature/pressure slightly; ensure correct peel method for your material. |
| A 'losgadh fàileadh rè obrachadh | Excessive temperature; material burning; new machine odor. | Reduce temperature; ensure proper material compatibility; new machine odor is normal initially. |
8. Sònrachaidhean
- Meud pleit: 15 x 15 ann an / 38 x 38 cm
- Meudan toraidh: 14.96 x 14.96 x 13.66 òirleach
- Ìre Teòthachd Àrd: 482 Ceum Fahrenheit (250 Ceum Celsius)
- Voltage: 110 Volt
- Cumhachd: 1200 W
- Smachd ùine: 0 - 999 diogan
- Cuideam lom: 41.4 lb / 18.8 kg
- Stuth: Ceramic, Vinyl (referring to compatible materials for transfer)
- Dath: Dubh
- Cleachdaidhean a thathar a’ moladh: T-Shirt, Pillow, Bag, Phone Shell
- Àireamh Modail: Heat Press 15 x 15in
- UPC: 840349973999
9. Barantas agus Taic
Airson fiosrachadh barantais, taic theicnigeach, no ceistean seirbheis, thoir sùil air na mion-fhiosrachadh conaltraidh a tha air a thoirt seachad ann am pasgan an toraidh agad no tadhail air làrach-lìn oifigeil VEVOR. website. Keep your purchase receipt and model number handy for faster assistance.
