Pretul SOIN-101MP Leabhar-làimhe Cleachdaiche Mini Inverter Welder

1. Ro-ràdh

Thank you for choosing the Pretul SOIN-101MP Mini Inverter Welder. This compact and lightweight welding machine is designed for shielded metal arc welding (SMAW) processes, offering higher efficiency and lower power consumption compared to conventional welders. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new welder.

Please read this manual thoroughly before operating the machine and keep it for future reference.

2. Fiosrachadh Sàbhailteachd

WARNING: Welding can be dangerous. Always follow safety precautions to prevent serious injury or death.

• Cuir ort uidheamachd dìon pearsanta (PPE) iomchaidh an-còmhnaidh, a’ gabhail a-steach clogaid tàthaidh le sgàil cheart, miotagan tàthaidh, aodach dìon, agus brògan sàbhailteachd.
• Dèan cinnteach gu bheil fionnarachadh iomchaidh ann san àite-obrach gus casg a chur air anail a tharraing a-steach ceò tàthaidh.
• Protect yourself and others from electric shock. Do not touch live electrical parts. Ensure the machine is properly grounded.
• Be aware of fire and explosion hazards. Remove all flammable materials from the welding area. Have a fire extinguisher readily available.
• Arc rays can burn eyes and skin. Use proper eye and face protection.
• Do not operate the welder in wet conditions or near water.
• Dì-cheangail an cumhachd mus dèan thu obair-chàraidh no atharrachaidhean sam bith.

3. Pasgan-susbaint

Dèan cinnteach gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal air an toirt a-steach don phacaid agad:

Image: The Pretul SOIN-101MP Mini Inverter Welder shown with all its included accessories: the welding machine, electrode holder cable, ground clamp cable, shoulder strap, protective welding mask, wire brush, power cable with plug, and a pack of welding electrodes.

• 1 x Pretul SOIN-101MP Mini Inverter Welder
• 1 x Electrode Holder Cable (2 m, #7 AWG / 10 mm²)
• 1 x Cl Talmhainnamp Cable (2 m, #7 AWG / 10 mm²)
• Strap ghualainn 1 x
• 1 x Protective Welding Mask
• 1 x Wire Brush
• 1 x Càball Cumhachd le Pluga
• 1 x 1 kg pack of 1/8" E6013-4 Electrodes

Image: A visual list of included accessories, detailing the ground clamp cable, electrode holder cable, strap, protective mask, wire brush, power cable, and electrodes.

4. Toradh thallview

Familiarize yourself with the main components of your Pretul SOIN-101MP welder:

Ìomhaigh: Mion-fhiosrachadh view of the welder, highlighting key components such as the electronic current adjustment control, power cable input, on/off switch, and quick-change terminals.

• Electronic Control for Current Adjustment: Digital display and knob for precise ampsuidheachadh erage.
• Cuir a-steach càball cumhachd: Connection point for the main power supply.
• Tionndadh air / dheth: Main power control for the unit.
• Quick-Change Terminals (Bornes): 3/8" terminals for connecting the electrode holder and ground clamp càbaill.
• Fan fuarachadh: Located internally to prevent overheating.

5. Suidhich

1. Suidheachadh: Place the welder on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure there is sufficient space around the unit for air circulation.
2. Ceangail Talamh Clamp: Ceangail an talamh clamp cable to the appropriate quick-change terminal on the welder. Securely attach the ground clamp to the workpiece or a clean, bare metal part of the welding table, ensuring good electrical contact.
3. Connect Electrode Holder: Connect the electrode holder cable to the other quick-change terminal on the welder. Insert the desired electrode into the electrode holder.
4. Ceangal cumhachd: Ensure the welder's ON/OFF switch is in the "OFF" position. Plug the power cable into a grounded 127 V, 1-phase power outlet.
5. Uidheam Dìon Pearsanta (PPE): Before turning on the welder, put on all necessary PPE, including your welding helmet, gloves, and protective clothing.

6. Stiùireadh Obrachaidh

1. Tionndaidh air: Flip the ON/OFF switch to the "ON" position. The digital display will illuminate.
2. Atharraich an-dràsta: Use the current adjustment knob to set the desired amperage. The digital display will show the selected current. Refer to the electrode manufacturer's recommendations for appropriate current settings.
3. Electrode Selection: This welder is designed for shielded metal arc welding (SMAW) and is compatible with the following electrode types:
   • 6013 (Up to 1/8")
   • 6011 (Up to 1/8")
   • 7018 (Up to 3/32")
   

   Image: A chart illustrating compatible electrode types (6013, 6011, 7018) and their recommended sizes for 1-phase operation with the SMAW process. It also indicates N/A for TIG tungsten.

4. Tòisich tàthadh: With the electrode in the holder and the ground clamp attached, strike an arc on the workpiece. Maintain a consistent arc length and travel speed for optimal weld quality.
5. Post-tàthadh: After completing the weld, turn off the welder. Allow the machine to cool down before storing. Clean the workpiece and remove any slag.

7. Cumail suas

Bidh cumail suas cunbhalach a’ dèanamh cinnteach gum mair an inneal-tàthaidh agad fad-beatha agus gum bi e ag obair gu math.

• Glanadh: Periodically clean the exterior of the welder with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• Sgrùdadh càball: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damaged insulation. Replace any damaged cables immediately.
• Sgrùdadh Crìochnachaidh: Ensure the quick-change terminals are clean and free of corrosion. Tighten connections as needed.
• Stòradh: Stòraich an inneal-tàthaidh ann an àrainneachd thioram, ghlan, air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.

8. A ’dèanamh trioblaid

9. Sònrachaidhean

Image: The Pretul SOIN-101MP welder with dimensions indicated: 18 cm height, 25 cm depth, and 10 cm base width.

Feartan teicnigeach:

Image: A list of technical features including IGBT Inverter, Thermal Protect, Arc Force, Anti Stick, Hot Start, and Lift TIG, with brief descriptions.

• Teicneòlas Inverter IGBT: Allows operation at any current level, providing stable and efficient welding.
• Thermal Protect: Thermal protection against overload, automatically shutting down the unit to prevent damage.
• Feachd Arc: Adjusts the optimal arc value and allows welding in different positions.
• Anti Stick: Prevents overheating and sticking of the electrode to the workpiece.
• Toiseach teth: Facilitates arc ignition, making it easier to start welding.
• TIG Lift: Facilitates arc ignition with the TIG process (Note: This model is primarily for SMAW, TIG functionality may require additional accessories not included).

10. Barantas agus Taic

For warranty information and technical support, please refer to the documentation included with your product or contact Pretul customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, you may visit the official Pretul brand store on Amazon: Pretul Store