Leabhar-stiùiridh Micreofon Co-dhlùthadair Ioma-phàtran Samson C03

Ro-ràdh

The Samson C03 is a versatile multi-pattern condenser microphone designed for high-quality audio capture in various studio and live applications. It features dual 19mm diaphragm capsules, offering rich, warm bass and an extended top end for vocals, and a detailed, transparent response for instruments. Its robust construction and flexible controls make it a valuable tool for professional audio production.

Figure 1: Samson C03 Multi Pattern Condenser Microphone. This image shows the microphone's sleek black design with its prominent grille.

Prìomh fheartan

• Dual 19mm Diaphragm Capsules: Captures audio with rich bass and extended high frequencies.
• Switchable Pickup Patterns: Offers Super Cardioid, Omni, and Figure-8 patterns for versatile recording.
• Filter pas àrd a ghabhas atharrachadh: Reduces unwanted low-frequency noise.
• Pad 10dB: Attenuates input signal to prevent distortion when recording loud sources.
• Gold-Plated XLR Connectors: Ensures reliable and high-quality signal transfer.
• 48-Volt Phantom Power LED Indicator: Provides visual confirmation of power status.
• Togail seasmhach: Built with a combination of metal and plastics for longevity.
• Accessories air an toirt a-steach: Comes with a swivel stand mount and a protective carry case.

Suidhich

1. Stàladh a 'mhicreofon: Attach the C03 to a microphone stand or boom arm using the included swivel mount. The swivel mount features a thread reducer, allowing compatibility with various stand types. Ensure the microphone is securely fastened.
2. Connecting to an Audio Interface/Mixer: The C03 uses an XLR connection. Connect the microphone to an audio interface or mixer using a standard XLR cable (not included).
3. Cumhachd Taibhse: The C03 requires 48-volt phantom power to operate. Activate phantom power on your audio interface or mixer. The LED indicator on the microphone will illuminate when phantom power is supplied correctly.
4. Roghainnean tòiseachaidh: Before recording, ensure the 10dB pad is disengaged (0dB) and the high-pass filter is off for a neutral starting point. Adjust these settings as needed during operation.

Stiùireadh Obrachaidh

Taghadh Pàtran Polar

The Samson C03 offers three switchable polar patterns to adapt to different recording scenarios. A switch on the microphone body allows you to select between:

• Super Cardioid: Ideal for isolating a single sound source, minimizing pickup from the sides and rear. This pattern is excellent for vocals and individual instruments.
• Iomlan-stiùiridh: Captures sound equally from all directions. Suitable for recording room ambiance, group vocals, or multiple instruments simultaneously.
• Figear-8: Picks up sound from the front and rear equally, while rejecting sound from the sides. Useful for recording two vocalists facing each other or for specific stereo miking techniques.

Sgàilean àrd-pas

The high-pass filter switch (often labeled 'HPF' or with a filter icon) reduces low-frequency rumble and unwanted bass frequencies. Engage this switch when recording vocals to reduce plosives or when recording instruments to eliminate stage rumble or handling noise.

10dB Pad

The 10dB pad switch (often labeled '-10dB') attenuates the input signal by 10 decibels. Use this feature when recording very loud sound sources, such as drums, guitar amplifiers, or brass instruments, to prevent signal clipping and distortion in your audio interface or mixer.

Suidheachadh microfòn

Proper microphone placement is crucial for optimal sound capture. Experiment with different positions relative to the sound source and room acoustics. Consider the following general guidelines:

• Guthan: For a clear vocal recording, position the microphone 6-12 inches from the vocalist, slightly off-axis to reduce plosives. Use the Super Cardioid pattern for maximum isolation.
• Giotàr fuaimneach: Place the microphone 6-12 inches from the soundhole, pointing towards the 12th fret for a balanced sound. Experiment with the angle and distance to capture desired warmth or brightness.
• Cosgaisean druma: Use two C03 microphones in Omni mode, placed above the drum kit, to capture a wide stereo image of the entire kit.
• Piano: For grand pianos, place two C03s in Omni mode, one over the bass strings and one over the treble strings, at a distance of 1-2 feet.

Cumail suas

To ensure the longevity and optimal performance of your Samson C03 microphone, follow these maintenance guidelines:

• Glanadh: Cleachd clò bog, tioram gus corp a’ mhaicreafòin a sguabadh. Seachain innealan-glanaidh leaghaidh no fuasglaidhean a chleachdadh, oir faodaidh iad milleadh a dhèanamh air a’ chrìochnachadh no air na pàirtean a-staigh.
• Stòradh: When not in use, store the microphone in its included protective carry case to shield it from dust, moisture, and physical damage.
• Làimhseachadh: Always handle the microphone with care. Avoid dropping it or subjecting it to harsh impacts, which can affect its delicate internal components.

Fuasgladh thrioblaidean

If you encounter issues with your Samson C03, consider the following troubleshooting steps:

• Gun fhuaim: Ensure phantom power is activated on your audio interface/mixer. Check all XLR cable connections for proper seating. Verify that the input gain on your interface/mixer is set appropriately.
• Fuaim air a shaobhadh: If the audio sounds distorted, check if the 10dB pad is engaged. Disengage it if the sound source is not excessively loud. Reduce the input gain on your audio interface/mixer.
• Cus Beus/Rùsgadh: Engage the high-pass filter to reduce unwanted low-frequency noise. Adjust microphone proximity to the sound source.
• Fuaim cùl-fhiosrachaidh gun iarraidh: Ensure you are using the appropriate polar pattern for your recording environment. The Super Cardioid pattern offers the best rejection of off-axis sounds.

Sònrachaidhean

Barantas agus Taic

The Samson C03 Multi Pattern Condenser Microphone comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms and conditions. It is recommended to register your product online to activate your warranty and receive product updates.

For technical support, product inquiries, or service requests, please visit the official SAMSON website or contact their customer support directly. Keep your purchase receipt and product serial number handy for faster assistance.