1. Ro-ràdh
The Philips GoPure SelectFilter Ultra SFU150 is a high-performance replacement filter designed for use with Philips GoPure Car Air Purifier GP7511 and GP7501 Series. This filter is engineered to capture tiny particles and eliminate harmful contaminants, ensuring cleaner and healthier air inside your vehicle.
It features an upgraded filtration efficiency, capable of capturing over 99% of particles as small as 0.004 micrometers (µm), and includes a special antimicrobial layer to inhibit the growth of microorganisms.
2. Setup and Installation (Filter Replacement)
This section provides general guidance for replacing the SelectFilter Ultra SFU150 in your compatible Philips GoPure Car Air Purifier. Always refer to your specific GoPure device's user manual for detailed, model-specific instructions.
- Ensure your Philips GoPure Car Air Purifier is turned off and disconnected from its power source.
- Locate the filter compartment on your GoPure device. This is typically found on the underside or side of the unit.
- Open the filter compartment cover. This may involve sliding a latch or pressing a release button.
- Carefully remove the old filter from the compartment.
- Unpack the new Philips GoPure SelectFilter Ultra SFU150 replacement filter.
- Insert the new filter into the compartment, ensuring it is oriented correctly according to the markings on the filter or the device.
- Dùin còmhdach roinn an criathrag gu tèarainte.
- Reconnect your Philips GoPure Car Air Purifier to its power source and turn it on.
- Some models may require a filter reset. Consult your device's manual for instructions on resetting the filter indicator.
3. Operating Principles of the Filter
The SelectFilter Ultra SFU150 utilizes a unique 3-stage filtration technology developed by Philips to purify the air in your car.
This system effectively eliminates up to 99% of harmful gases, smoke, bacteria, odors, dust, pollen, pet hair, and other particles from the vehicle's interior. The filtration stagtha e:
- Ro-shìoladh: Captures larger particles like dust, pet hairs, and dirt. This layer is often cleanable.
- HESA Filter: Removes harmful gases such as Total Volatile Organic Compounds (TVOCs) and exhaust gases (NO2/SO2) with up to 98% efficiency.
- Filter HEPA: Targets viruses, bacteria, PM2.5 particles, and 90% of airborne allergens, capturing particles as small as 0.004µm.
The filter's capability to capture particles as small as 0.004µm is significant, as illustrated by the following comparison:
4. Cumail suas
To maintain optimal performance of your Philips GoPure Car Air Purifier, regular filter replacement is essential.
- Recommended Lifetime: The SelectFilter Ultra SFU150 has a recommended lifetime of 6 to 8 months, depending on usage and air quality conditions.
- Glanadh ro-chriathrag: The pre-filter layer is designed to be cleanable. Periodically, you may remove the filter and gently clean the pre-filter surface to remove accumulated dust and larger debris. Ensure the filter is completely dry before reinserting it into the device.
- Ath-àite: Replace the entire filter unit when the recommended lifetime is reached or when the air purifier's filter indicator signals a replacement is due. Do not attempt to wash or reuse the HEPA or HESA layers, as this can damage the filter's integrity and reduce its effectiveness.
5. A ’dèanamh trioblaid
If you experience issues after replacing your filter, consider the following:
- Glanadair Adhair gun a bhith a’ tionndadh air: Ensure the filter compartment is securely closed and the device is properly connected to its power source.
- Filter Indicator Still On: Some GoPure models require a manual reset of the filter indicator after replacement. Refer to your specific GoPure device's user manual for instructions on how to perform this reset.
- Sruth-adhair no Maireannachd fàileadh nas lugha: Verify that the new filter is installed correctly and not obstructed. If the issue persists shortly after replacement, the filter might be faulty, or the air purifier itself may require servicing.
6. Sònrachaidhean
| Feart | Mion-fhiosrachadh |
|---|---|
| Modail Àireamh | SFU150 |
| Brand | Philips |
| Co-fhreagarrachd | Philips GoPure Car Air Purifier GP7511/GP7501 Series |
| Teicneòlas sìoltachaidh | 3-stage (Pre-filter, HESA, HEPA) |
| Particle Capture Efficiency | > 99% of particles as small as 0.004µm |
| Antimicrobial Layer | Yes, inhibits microorganism growth |
| Recommended Lifetime | 6 - 8 mìosan |
| Meudan pacaid (L x W x H) | 23 cm x 15 cm x 5 cm |
| Cuideam pacaid | 0.11 kg |
Note: The "Voltage: 12 V" and "Function: Dusting" specifications found in some product listings refer to the compatible air purifier unit, not the filter itself.
7. Molaidhean cleachdaiche
Cha robh molaidhean sònraichte sam bith rim faighinn bho luchd-cleachdaidhviews or Q&A for this product. However, general tips for air purifier filters include:
- Regularly check your air purifier's filter indicator light.
- For optimal performance, replace the filter within the recommended timeframe, even if the indicator light has not yet activated, especially if you frequently drive in polluted areas.
- Keep the filter packaging sealed until ready for installation to maintain its effectiveness.
8. Barantas agus Taic
For warranty information and customer support regarding your Philips GoPure SelectFilter Ultra SFU150 or compatible Philips GoPure Car Air Purifier, please refer to the documentation provided with your original air purifier unit or visit the official Philips Automotive Lighting weblàrach.
