GF-CH03A Embedded Intelligent Multi-Functional Charger
“
Specifications:
- Product name: Embedded Multi-Functional Integrated Cup
Holder - Model: GF-CH03A, GF-CH03B
- Input Voltage: DC 24-36V
- Motor control: Wireless charging
- Output power:
- USB-A Output: Dual motor 10W Max EPP 10W Max
- Type-C Output: 10W Max
- A+C Output: 10W Max
- Communications standard: USB-A Output
- Sofa light strip options
- Protection: Over current, over voltage, short circuit
protection - Product size: 200mm*127mm*115mm
Product Usage Instructions:
Installation:
- The opening size of the furniture surface should match the
dimensions of GF-CH03A.
Key Function Description:
| Key Icon | Function |
|---|---|
| Cup light | Turn on/off cup light |
| Keylock | Lock/unlock the device |
Notes:
Hold down the key for 3 seconds to activate the corresponding
function.
FAQ:
Common Product Faults:
- Phenomenon: Cannot start charging
Cause: 1. The power supply does not meet
requirements. 2. Unstable connection of power interface. 3. The
charging distance is out of range. 4. There are other metal objects
in the charging area.
Remedy: 1. Replace the adapter that matches. 2.
Reinsert the power socket. 3. Use within the specified distance. 4.
Remove metal foreign bodies. - Phenomenon: Charging is slow
Cause: The temperature of the product is too
high
Remedy: 1. Keep reasonable space for heat
dissipation. 2. Please wait until the temperature drops to room
temperature before using the device.
Hazardous Substance Declaration:
This mark indicates the environmental service life of the
product and its impact on the environment and human health. It
specifies the presence or absence of hazardous substances according
to regulations.
Product Warranty:
Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd
Website: http://www.gcteq.com
“`
320.00 mm
Common product faults
Phenomenon
Cannot start charging
Charging is slow
Cause
1.The power supply does not meet requirements. 2.Unstable connection of power interface. 3.The charging distance is out of range. 4.There are other metal objects in the charging area.
The temperature of product is too high
Remedy
1.Replace the adapter that match. 2.Reinsert the power socket. 3.using within the specified distance. 4.Remove metal foreign bodies
1Keep reasonable space for heat dissipation 2Please wait until the temperature drops to room temperature before using the device
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Hazardous Substance Declaration
This mark is the product pollution control mark, the number of which represents the environmental service life. In this period of time, under normal conditions of use harmful substances will not cause greater pollution to the environment or damage to human life and property.
Name of parts
Electronic components Plastic casing Electroplated aluminum alloy parts Non-electroplated metal parts
Lead (Pb)
Mercury (Hg)
Hazardous substance
Cadmium (Cd)
Hexavalent -Chromium (Cr(VI))
Polybrominated -Biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
Double faced adhesive tape
Synthetic cork
Silicon parts
This form is in term of Stipulation SJ/T 11364 O It means that the content of the harmful substance in a part of the part is lower than the limit requirements specified in GB/T 26572. X It means that the content of the harmful substance in a part of the part exceeds the limit requirements specified in GB/T 26572.
Product Warranty
The warranty services of repair, exchange and return are provided for wireless charger products in strict accordance with the provisions of Consumer Rights Protection Law of the Peoples Republic of China and Product Quality Law of the Peoples Republic of China. The service contents are as follows: 1. If any performance fault occurs in the product within 7 days from the day following the purchase (signature for receipt), you can enjoy the return or exchange services free of charge after testing and confirmation by the after-sales service center; 2. If any performance fault occurs in the product within 8-15 days from the day following the purchase (signature for receipt), you can enjoy exchange or repair services free of charge after testing and confirmation by the after-sales service center; 3. If any performance fault occurs in the product within 1 year from the day following the purchase (signature for receipt), you can enjoy repair services free of charge after testing and confirmation by the after-sales service center; Non-warranty Provisions The warranty services of repair, exchange and return are not provided in one of the following cases, and only repair is provided for a fee; 1. Damage is caused by consumers due to improper use, repair and storage; 2. Damage is caused due to the repairs not performed by authorized service providers designated by the Company; 3. No valid warranty services or invoices or proof of purchase can be provided; 4. Damage is caused due to force majeure.
Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd Website: http://www.gcteq.com
Checked Certificated of qualification
GF-CH03 User manual
Instruction
Wireless charging Type-C
Cup holder
Cup light USB-A
Installation
1. The opening size of the furniture surface is as follows:
GF-CH03A
Key function description
Key icon
Function
Cup light Keylock
Reset Open Close Lumbar Open Lumbar Close Head Open Head Close
Notes
Hold down for 3 seconds
Specification
Product name
EmbeddedMulti-FunctionalIntegratedCupHolder
Model
GF-CH03A
GF-CH03B
Input Voltage
DC 24-36V
Motor control
Wireless charging
Output power Communications standard
USB-A Output
dual motor 10W Max EPP 10W Max
dual motor 10W Max EPP 10W Max
Type-C Output
10W Max
10W Max
A+C Output
10W Max
10W Max
Sofa light strip
Options
Protection
Over current, over voltage, short circuit protection
Product size
200mm*127mm*115mm
240.00 mm
Documents / Resources
 |
GCteq GF-CH03A Embedded Intelligent Multi-Functional Charger [pdf] Instruction Manual GF-CH03A, GF-CH03A Embedded Intelligent Multi-Functional Charger, Embedded Intelligent Multi-Functional Charger, Intelligent Multi-Functional Charger, Multi-Functional Charger, Charger |