GCteq GF-04Pro-C Embedded Intelligent Multi Functional Charger
FAQs
- Q: What should I do if the product does not start charging?
- A: Check the power supply, connection interfaces, and charging distance, and remove any metal objects from the area.
- Q: How can I improve slow charging speeds?
- A: Ensure the adapter matches, insert the power socket correctly, maintain the specified distance, and remove any metal foreign bodies.
Instructions
- Make sure that your phone supports wireless charging because wireless charging requires the support of the wireless induction coil built into the phone(hardware);
- When you power on the wireless charger, please make sure there is no magnetic object (metal, magnet, etc.) in the charging area, then switch on the power, and place the mobile phone in the charging area；
- The wireless coil of different phones is located in different locations. The sensor area is generally located in the center of the phone. You need to make sure that the wireless coil of the phone is aligned with the center of the wireless charging area. When charging starts, the screen will light up to show the charging prompt；
- You need to pay attention to the limitation of charging distance for wireless charging. The distance between the phone and the wireless charger should not exceed the maximum charging distance of the product.
Instruction
Perspective View
Top view
Front view
Fixation for Installation
- The maximum outer diameter of the product is 100.5mm, and the bottom depth is 97.8mm. Furniture surface hole size is recommended φ103mm, and a reasonable gap is reserved at the bottom to facilitate the heat dissipation of product, as shown in the figure below:
- Put the product into the drilled round hole, and tighten the fixing ring at the bottom, as shown in the figure below:
Operation Instructions
Definition of movement module buttons and indicator lights
| Button form | Touch button | ||||
|
State
|
Initial state
|
Raising state
|
Screw-out state
|
||
| Button action | Click | Double-click | Click | Double-click | Double-click |
| Movement | Raise | Raise a rotate
rightwards
|
Descend | Rotate rightwards | Rotate leftwards |
| Indicator | Blue | Green | Blue | Green | Green |
Definition of buttons and indicator lights of heating and cooling modules
Note:
The heating and cooling functions can only be enabled after the product is screwed out, please make sure that the product has been fully screwed out and entered the following state. If the product is manually toggled or not rotated properly, the heating and cooling functions may not be available;
Operation instructions for heating and cooling:
Put the liquid into the heating and cooling cup, put the cup into the cup holder, and then select the corresponding function. The heating and cooling functions will be automatically turned off after three hours of operation.
Specifications
| Product name | Embedded intelligent multi-functional charger | ||
| Model
Input |
GF-04 PRO-C01EN | GF-04 PRO-C03EN | |
| Wireless Output | 15W Max,com DC 24V-32V 10W/7.5W/5W
patible with |
||
| charger | |||
| Transmission distance | 3-8mm(coil-coil) | ||
| Type-C Output | 30W Max | ||
| USB-A Output | 18W Max | ||
| Haenadting fcuonoclitniogn | Power | 33W | |
| Cup capacity | 350ML | ||
| mCoondsetant temperature | 50℃-55℃ | / | |
| Cooling mode | 5℃-15℃ | 5℃-15℃ | |
| Tea warming mode | 30℃-35℃ | / | |
| Milk warming mode | 40℃-45℃ | / | |
| Protection | Overcurrent, overvoltage, short circuit,FOD | ||
| Dimensions | Φ115mm×101.5mm | ||
Precautions
Please read and observe the following precautions carefully before installing and using this product:
- Please use the adapter that meets safety standards to power the device.
- The wireless charging distance of this product is 3-8mm (coil-coil).
- Please ensure that there are no metal foreign bodies between the wireless charger and the mobile phone before charging, so as to prevent the metal foreign bodies from being heated by mistake.
- Do not place magnetic cards such as bank cards and bus cards in the charging area to avoid damage to the cards.
- For a better wireless charging experience, please do not use the product beyond the maximum charging distance.
- The heating and cooling functions can only be used after the charging module is screwed out.
- If the charging module is manually toggled or not rotated properly, heating and cooling functions may not be available.
- Please reserve space for cooling products.
Performance Features
- With a unique installation process, it can realize convenient and quick installation.
- It consists of three core functions including wireless charging、 wired charging and heating \cooling, which can meet different scenarios.
- With intelligent power distribution, it can meet different application combinations.
- It is compatible with wireless fast charging protocols of mainstream devices such as Apple 7.5W and Samsung 10W.
- It provides A 18W and C30W (maximum) wired charging interface.
FCC
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Common product faults
Hazardous Substance Declaration
This mark is the product pollution control mark, the number of which represents the environmental service life. In this period of time, under normal conditions of use harmful substances will not cause greater pollution to the environment or damage to human life and property.
Documents / Resources
 |
GCteq GF-04Pro-C Embedded Intelligent Multi Functional Charger [pdf] User Manual GF04BPROC01EN, 2ATX3-GF04BPROC01EN, 2ATX3GF04BPROC01EN, GF-04Pro-C Embedded Intelligent Multi Functional Charger, GF-04Pro-C, Embedded Intelligent Multi Functional Charger, Intelligent Multi Functional Charger, Multi Functional Charger, Functional Charger, Charger |