X-am 2800 Multigas Detection System
“
Specifications:
- Multigas Detection System (Ex, O2, CO, H2S, NO2 or SO2)
- Measuring Range: –
- Alarms: Audible and visual (red LED for gas alarm, yellow LED
for device-related alarm) - Dimensions (W x H x D): 130 x 48 x 44 mm
- Weight: 250 g
- Operating time: > 12 h with NiMH batteries
- Charging time: < 4 h
Product Description:
The X-am 2800 is a multigas detection system featuring
poison-resistant Ex SR sensor for robustness and longevity,
long-life electrochemical sensors for reliable gas measurements,
and ergonomic design for maximum comfort and safety in hazardous
environments.
Product Usage Instructions:
- Wearing the Detector: Ensure the detector is
securely worn for optimal performance. - Calibration: Calibrate the sensors as per the
manual instructions for accurate readings. - Reading Gas Levels: Use the clear display to
monitor gas readings, alarms, and time. - Charging: Charge the device for less than 4
hours for extended usage.
FAQ:
Q: How often should the sensors be calibrated?
A: The sensors should be calibrated as per the
manual instructions, typically every few months or as recommended
based on usage.
Q: What do the different LED colors indicate?
A: The red LED indicates a gas alarm, while the
yellow LED signals a device-related alarm.
Q: Is the device compatible with previous accessories?
A: Yes, the device remains compatible with
accessories from previous product lines for added convenience.
“`
Visit our websites:
www.gazdetect.com Online store: www.safetygas.com
Dräger X-am 2800
Multigas Detection System (Ex, O2, CO, H2S, NO2 ou SO2)
Product description
The Portable Multi-Gas Detector The X-am® 2800 portable multi-gas detector is specially designed for personal monitoring in industrial environments. It can simultaneously measure up to four gases (explosive gases, O, CO, HS, NO, or SO). It combines performance, robustness, and safety while reducing operating costs.
Poison-resistant Ex SR sensor The next-generation Ex sensor is highly robust, resistant to shocks, silicone poisoning, and hydrogen sulfide. It can be calibrated in just a few seconds, offers excellent shock resistance, and has a lifespan of over 4 years.
Long-life electrochemical sensors
Equipped with long-lasting XXS sensors, the device ensures reliable
measurements of O, CO, HS, NO, or SO gases. These sensors are
Caractéristiques techniques
energy-efficient and highly durable.
Measuring Range:
· Combustible gases: 0 to 100% LEL in 1% increments · Oxygen (O): 0 to 30% vol. in 0.1% increments · Carbon monoxide (CO): 0 to 2,000 ppm in 1 ppm increments · Hydrogen sulfide (HS): 0 to 200 ppm in 0.1 ppm increments
Alarms:
Ergonomic and robust Compact and lightweight, the detector is designed for maximum comfort. It’s easy to wear and operate–even with gloves–thanks to its large buttons. The clear display shows key information such as gas readings, alarms, and time. The green D-light LED indicates that the device is ready for use.
Audible and visual (red LED for gas alarm, yellow LED for device-re-
lated alarm) Dimensions (W x H x D): 130 x 48 x 44 mm Weight : 250 g Ambient Conditions :
· Protection rating: IP68 · Temperature: -20 to +50 °C
Maximum safety Approved for use in Ex zone 0, the X-am 2800 ensures maximum safety in hazardous environments. It complies with IP68 standards and features four alarm thresholds for oxygen, including pre-alarm and main alarm levels. In addition to the manual emergency alarm, an optional motionless alarm provides full personal protection.
· Relative humidity: 10 to 95% RH
Advances connectivity
Operating time :
The X-am 2800 features Bluetooth 5.0 for real-time data transfer
> 12 h with NiMH batteries
to a smartphone, the ConHub gateway, or the cloud via the X-dock
> 100 h sans capteur Ex
station. Data can be accessed from any web browser using the Dräger
Charging time < 4 h
Gas Detection Connect software.
Certifications:
Data management and analysis
ATEX : I M1 Ex da ia I Ma · II 1G Ex da ia IIC T4 Ga · IECEx : Ex da ia I Ma – Ex da ia IIC T4 Ga
The detector simplifies fleet management with Dräger Gas Detection Connect software. It enables real-time data transfer via
CSA (Canada & USA) : Classe I, Zone 0, AEx da ia IIC T4/T3 Ga
Bluetooth to a smartphone, ConHub, or the cloud through X-dock.
Classe I, groupes A, B, C, D – Classe II, division 1, groupes E, F, G The X-dock station performs quick tests with low gas consumption,
EAC : PO Ex da ia I Ma X – 0Ex da ia IIC T4 Ga X
offers automatic firmware updates, and supports an optional RFID
Directives ATEX : 2014/34/UE Directives RoHS : 2011/65/UE
transponder. Parts are easy to replace, the device includes a 4-year warranty, and it remains compatible with accessories from previous
CE Compliance Warranty: 4 years for the device (electronics and housing) 3 years for sensors (except NO [1 year] and SO [2 years]) 1 year for the power supply (battery pack)
product lines.
Maintenance included This device comes with included maintenance, to be carried out twice a year, ensuring your equipment remains in optimal working
condition.
Non contractual document. Any reproduction, even partial, is prohibited without prior agreement. © GazDetect.
Phone +33 (0)1 64 09 35 16 · Fax +33 (0)1 60 66 15 87 contact@gazdetect.com
GazDetect : ZAE · 3, rue des Fossés 77240 VERT-SAINT-DENIS (France)
Documents / Resources
 |
GazDetect X-am 2800 Multigas Detection System [pdf] Instructions X-am 2800 Multigas Detection System, X-am 2800, Multigas Detection System, Detection System, System |