GATOR-logo

GATOR G35CL Flush Mount Camera With Loop System

GATOR-G35CL-Flush-Mount-Camera-With-Loop-System-product

Specifications

  • Front, Rear, or Reverse Camera
  • Universal Flush Mount
  • 100° Horizontal Lens Angle
  • CMOS Image Sensor
  • Parking Guidelines (Loop Setting Optional)
  • Mirror Image (Loop Setting Optional)
  • PAL/NTSC System (Loop Setting Optional)
  • DC 12V Compatible
  • IP67 Waterproof/Dustproof

Wiring Diagram

Wiring Diagram (Version 2 Loop System)

GATOR-G35CL-Flush-Mount-Camera-With-Loop-System-fig-2

Note:
When cutting loop wires make sure the power to the camera is turned off.

For CAN-BUS vehicles you will require a Gator GRCANFLT CAN-BUS filter. (Sold separately).

Technical Assistance

If you need assistance setting up or using your Gator product now or in the future, call Gator Support. Australia

Please retain this user guide for future reference.

For more information on the Gator range go to our website

GATOR-G35CL-Flush-Mount-Camera-With-Loop-System-fig-1

gatordriverassist.com

Flush Mount Camera, 18.5mm Drill Bit (Holesaw), 6M RCA Video Cable with Trigger and Camera Harness.

Documents / Resources

GATOR G35CL Flush Mount Camera With Loop System [pdf] User Manual
G35CL Flush Mount Camera With Loop System, G35CL, Flush Mount Camera With Loop System, Mount Camera With Loop System, Camera With Loop System, With Loop System, Loop System

References

Leave a comment

Your email address will not be published. Required fields are marked *