GARO GFS332 Enclosed Fuse Switch GFS User Manual
Dimensions
SWITCH FUSES 32A
Rated insulation voltage, Ui (V) 1000
Rated thermal current, Ith (A) 1) 32
Nominal values with cable size (mm2) 6
Rated operational current, I e (A)
AC-21
400/415V 32
500V –
690V –
AC-22
400/415V 32
500V –
690V –
AC-23
400/415V 32
500V –
690V –
Rated operational power for 3-phase (1500 r.p.m.)
squirrel cage induction motors (kW)
AC-23
400/415V 15
500V –
690V –
Rated fused short circuit current
Back-up fuse (A) 32
R.M.S. value, Ik (kA) 50
Peak value (kA) –
Impulse withstand voltage, Uimp (kV) 8
Rated short circuit making capacity, I cm (kA) 690V –
Rated short time withstand current (1 s), I cw (kA) 690V –
Rated breaking capacity, I cn (A)
AC-23
400/415V 256
500V –
690V –
Electrical endurance (operations) 2000
Mechanical endurance (operations) 20000
Terminals / Bolt size Cu (mm²) 2,5-35
Max terminal torque (Nm) 2.2
Fuse type
DIN 10×38
BS88 A1
- size of screws M4
- fixing centres (mm) 44,5
- torque (Nm) 1,8
| Enclosure | |
| Construction | 2mm cold-rolled steel plate |
| Degree of protection | IP55 |
| Impact resistence | IK10 |
| Temperature range | -25 2C / +40 2C |
| Maximum voltage | 1000 V AC / 1500 V DC. |
| Colour | RAL 7035. |
| Paint | Epoxy-polyester paint |
| Height (mm) | 300 |
| Width (mm) | 200 |
| Depth (mm) | 150 |
Supplier/Tillverkare:
GAROAB
Box 203
S-335 25 GNOSJO
Sweden
Telephone: +46 (0)370 33 28 00
Telefax: +46 (0)370 33 28 50
Supplier established within EU/Ombud etablerad inomEG
Supplier of equipment /Materielslag : Enclosed Switchgear
Trade Mark/ Varumärke: GARO
Type Designation / Typbeteckning: GSW…, GFS…, GCO…,.
We hereby declare that our product fulfils the requirements of following EC directives/
The Low Voltage Directive (LVD) 2014/35/EU I
Electromagnetic compatibility (EMC) 2004/108/EU I
RoHS Directive (RoHS) 2011/65/EU I RoHS direktivet (RoHS) 2011/65/EG.
No electromagnetic compatibility (EMC) immunity or emission tests are required on the assembly
The following harmonised standards (latest edition) or technical specifications which comply with good engineering practice in safety matters in force within the EU have been used in the design:
The equipment conforms completely with the above stated harmonised standards or technical specifications.
Or/Eller
The equipment confirms only partially with the above stated harmonised standards or technical specifications but complies with good practice in safety matters in force within the EU.
We have product surveillance according to CENELEC’s harmonised requirements, documents CCA-201.
Sign
Date
2016-06-29
Environmental- and Quality Manager
Magnus
Name
Documents / Resources
 |
GARO GFS332 Enclosed Fuse Switch GFS [pdf] User Manual GFS332, Enclosed Fuse Switch GFS, GFS332 Enclosed Fuse Switch GFS, Fuse Switch GFS, Switch GFS |
