GARMIN Ecomap Ultra 2 12 Chart Plotters
Specifications
- Dimensions: 414.7 mm (16 5/16 in.) x 240.7 mm (9 1/2 in.)
- Thickness: 3.2 mm (1/8 in.)
- Margin: 8.5 mm (11/32 in.)
- Printed in: Taiwan
- Model Number: 190-03083-16_0Printing a Mounting Template
- Select “None” for Page Scaling.
- Ensure the check mark is next to “Auto-Rotate and Center”.
- Drag the arrow to the right to view page 2 in the window below.
- Verify that the paper size is larger than the template.
- If the paper size is not large enough, select “Properties” and choose a Page Size that is larger than the template.
NOTICE: Fusion is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions. Date of Manufacture: June 2025
“`
Printing a Mounting Template
NOTICE
It is not recommended that you print a mounting template on your own. Use the template that came in the product box. If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates, you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions, may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your boat. 1 Select File > Print.
2 Select None for Page Scaling . 3 Ensure the check mark is next to Auto-Rotate and Center . 4 Drag the arrow to the right, to view page 2 in the window below. 4 Verify that the paper size is larger than the template .
In this example, the paper is not larger than the template. 5 If the paper size is not large enough, select Properties and select a Page Size that is larger than the template.
NOTICE
Fusion is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.
414.7 mm (16 5/16 in.)
240.7 mm (9 1/2 in.)
June 2025
3.2 mm (1/8 in.)
8.5 mm (11/32 in.)
ECHOMAP® Ultra 2 16xsv Flush Mount Template
CUT ALONG THE INSIDE OF THE LINE DECOUPER A L’INTERIEUR DE LA LIGNE TAGLIARE LUNGO L’INTERNO DELLA LINEA AN DER INNENSEITE DER LINIE SCHNEIDEN CORTA A LO LARGO DE LA PARTE INTERIOR DE LA LÍNEA CORTE AO LONGO DA PARTE INTERNA DA LINHA
SKÆR LANGS INDERSIDEN AF LINJEN SKJÆR LANGS INNSIDEN AV LINJEN
SKÄR LÄNGS MED INSIDAN AV LINJEN
© 2025 Garmin Ltd. or its subsidiaries
Printed in Taiwan
190-03083-16_0BSee the Important Safety and Product Information guide in the product box for product warnings and other
important information.
All route and navigation lines displayed on the chartplotter are only intended to provide general route guidance
or to identify proper channels, and are not intended to be precisely followed. Always defer to the navaids and
conditions on the water when navigating to avoid groundings or hazards that could result in vessel damage,
personal injury, or death.
NOTE: Not all features are available on all models.
The Garmin®
website at support.garmin.com presents up-to-date information about your product. The support
pages will provide answers to frequently asked support questions, and you can download software and chart
updates. There is also contact information to Garmin support should you have any questions. Tips and Shortcuts
• Press to turn on the chartplotter.
• From any screen, press repeatedly to scroll through the brightness levels, if available. This can be helpful
when the brightness is so low you cannot see the screen.
• Select Home from any screen to open to the home screen.
• Select to open additional settings about that screen.
• Select to quickly add a toolbar overlay to the current page.
• Select to close the menu when finished.
• Press to open additional options, such as adjusting the backlight.
• Press , and select Power > Turn Off System, or hold until the Turn Off System bar fills to turn off the
chartplotter, when available.
• Press , and select Power > Sleep Station to set the chartplotter to standby mode, when available.
To exit standby mode, select .
• Depending on the features of your chartplotter, not all feature buttons are visible are on the home screen.
Swipe right or left to view the additional feature buttons.
• On some menu buttons, select the button to enable the option.
A green light on an option indicates the option is enabled .
• When available, select to open the menu.
Accessing Owner’s Manuals on the Chartplotter
1 Select Info > Owner’s Manual.
2 Select a manual.
3 Select Open.
Accessing the Manuals from the Web
You can get the latest owner’s manual and translations of manuals from the Garmin website. The owner’s
manual includes instructions for using device features and accessing regulatory information.
1 Go to garmin.com/manuals/echomap_ultra_2.
2 Select the Owner’s Manual.
A web manual opens. You can download the entire manual by selecting Download PDF.
Garmin Support Center
Go to support.garmin.com for help and information, such as product manuals, frequently asked questions,
videos, software updates, and customer support.
Introduction 3
Inserting Memory Cards
This device supports two microSD memory cards up to a 32 GB, formatted to FAT32 with speed class 4 or
higher. Use of an 8 GB or larger memory card with speed class 10 is recommended.
1 Open the access flap or door on the front of the chartplotter.
2 Fully insert the memory card .
3 Clean and dry the gasket and door.
NOTICE
To prevent corrosion, be sure the memory card, gasket, and door are thoroughly dry before closing the door.
4 Close the door.
Acquiring GPS Satellite Signals
The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically
based on the GPS position.
1 Turn on the device.
2 Wait while the device locates satellites.
It may take 30 to 60 seconds to acquire satellite signals.
To view the GPS satellite signal strength, select Settings > System > Satellite Positioning.
If the device loses satellite signals, a flashing question mark appears over the boat position indicator ( ) on the
chart.
For more information about GPS, go to garmin.com/aboutGPS. For help acquiring satellite signals, see My
device will not acquire GPS signals, page 147.
Selecting the GPS Source
You can select your preferred source for GPS data, if you have more than one GPS source.
1 Select Settings > System > Satellite Positioning > Source.
2 Select the source for GPS data.
4 Introduction
Customizing the Chartplotter
Menu Bar
The menu bar along the bottom of the screen provides access to many functions of the chartplotter, the options
menu, and the home screen.
Engages and disengages the autopilot (when connected to a compatible autopilot system)
Allows you to add a toolbar overlay to the current page
Mark Creates a waypoint at your location
Home
Opens the home screen
TIP: Touch and drag to scroll through the home-screen items.
Info Opens the Information menu
Appears when there are warnings to review in the Warning Manager
Opens the options menu
Hiding and Showing the Menu Bar
You can hide the menu bar automatically to make more screen space available.
1 Select Settings > Preferences > Menu Bar Display > Auto.
After a short period of time on a main page, such as a chart, the menu bar collapses down.
2 Swipe the screen from the bottom up to show the menu bar again
Documents / Resources
 |
GARMIN Ecomap Ultra 2 12 Chart Plotters [pdf] User Manual 16, Ecomap Ultra 2 12 Chart Plotters, Ultra 2 12 Chart Plotters, Chart Plotters |