GARDENA 16001 Pipeline Irrigation System Instruction Manual

Art. No.: 16000 (Above-ground), 16001 (Underground), 16010 (Underground)
Intended Use: Outdoor irrigation of gardens and lawns in private gardens and allotments

Battery: Lithium-ion with integrated solar cell

Product Usage Instructions

Safety Instructions
- Read and follow all safety warnings, instructions, illustrations, and specifications provided with the product. Save them for future reference.
Safety Instructions for Irrigation Systems
- Avoid using water with sand or abrasive substances as it can cause wear and reduce performance.
- Regularly check the AquaPrecise for damage and do not use damaged products.
- Keep damaged parts away from children to prevent suffocation.
Intended Use
- The AquaPrecise is designed for outdoor irrigation of gardens and lawns in private settings. Do not use it for industrial or commercial applications or with chemicals, foodstuffs, or flammable substances.
Battery Safety Instructions
- The lithium-ion battery is charged via an integrated solar cell. Ensure the solar cell is clean to prevent water entry.
- Charge the AquaPrecise indoors to protect the USB port from moisture.
- Avoid charging the battery in direct sunlight to prevent overheating and fire hazards.

FAQs

Q: Can the AquaPrecise be used for professional operations?
- A: No, the AquaPrecise is not suitable for long-term professional use. It is intended for private garden and lawn irrigation only.
Q: How should I store the AquaPrecise during winter?
- A: Fully charge the battery before storing it for winter and keep it in a cool, dry place away from direct sunlight.
Q: What should I do if I notice any damage to the AquaPrecise?
- A: Do not use any damaged products. Immediately remove damaged parts and keep them away from children to prevent any risks of injury.

“`

View Fullscreen

16000-20.962.01

AquaPrecise (for above-ground installation)
Art. No. 16000

SAFETY INSTRUCTIONS

1.1 Safety instructions for irrigation systems
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this machine.
Save all warnings and instructions for future reference.
Sand and other abrasive substances in the water cause faster wear and reduced performance. If the water used contains sand, use a filter (e. g. GARDENA
Pressure Regulator with integrated filter (Art. No. 8200)). Do not use a lawn aerator or aerator rake over the ground-
level AquaPrecise. Regularly check the AquaPrecise for damage and do not
use any damaged products. Immediately remove any damaged parts. Keep damaged parts away from children.
This reduces the risk of suffocation. Check the height adjustment of robotic lawnmowers
when the AquaPrecise is installed in the Pipeline box. This prevents the AquaPrecise from being damaged. Bury the Pipeline box at a sufficient depth and observe the minimum and maximum burying depths. This reduces the risk of tripping. When the AquaPrecise is removed from the Pipeline box, close the box using the box lid. This reduces the risk of tripping. Do not overload the box lid (maximum load of 120 kg). This reduces the risk of injury and damage to the sprinkler. Do not use the AquaPrecise in explosive atmospheres. There is a risk of explosion.
3

DANGER! Risk of cardiac arrest!
This product generates an electromagnetic field during operation. This electromagnetic field may affect the functionality of active or passive medical implants (e. g. pacemakers), which may result in serious injury or death. Consult your doctor and the manufacturer of your implant
before using this product. Remove the battery when you are not using the product.
DANGER! Risk of suffocation!
Smaller parts can be swallowed. Keep toddlers away when you assemble the product.
1.2 Intended use
The GARDENA AquaPrecise irrigation system is for outdoor irrigation of gardens and lawns in private gardens and allotments. The product is not suitable for long-term use (professional operation). DANGER!
Risk of injury! The AquaPrecise irrigation system must not be used in industrial or commercial applications, or in combination with chemicals, foodstuffs or flammable or explosive substances.
4

1.3 Battery safety instructions
The AquaPrecise has a lithium-ion battery, which is automatically charged via an integrated solar cell. Irrigation cannot take place if the battery has run out of charge. Check that the solar cell is not dirty.
This will ensure that the battery charges continuously. If the AquaPrecise is operated with an upstream valve / controller and is only used for irrigation, the valve will close as soon as the battery has run out of charge. To operate independently, the location should be exposed to about 1 2 hours of direct sunlight (trickle charging). Alternatively, the battery can also be charged via the USB port. The battery should be charged via the USB port every six months (spring and autumn). Close the USB port cover after charging via the USB port.
Otherwise water may enter the AquaPrecise. Only charge the AquaPrecise indoors.
This protects the USB port from moisture. Fully charge the battery before storing for winter. Do not charge the battery in direct sunlight.
The battery can overheat and cause a fire hazard. Charge the battery on a fireproof surface.
The battery may become hot during charging and cause a fire hazard. Only use original GARDENA spare parts. Spare parts that have not been tested by GARDENA may cause an increased risk of fire or defective products. Do not charge the battery outside of the AquaPrecise. This reduces the risk of fire. When replacing batteries, handle the spare battery with care. A damaged battery can cause fire.
5

Only use the original GARDENA batteries recommended by the manufacturer. Other batteries do not guarantee product safety.

INSTALLATION

2.1 Included in delivery

AquaPrecise Mounting plate Pipeline box Winter cover Quick Guide

Art. No. 16000 x x x

Art. No. 16001 x x x x

Art. No. 16010 x x x x

2.2 Preparing for installation
The steps listed below must be followed before installing the AquaPrecise:
· “2.3 Charging the battery via the USB port” · “2.4 Installing the GARDENA Bluetooth® App on your mobile
device”
· “2.5 Selecting the right location for the AquaPrecise” · “2.6 Connecting the AquaPrecise to the GARDENA Bluetooth®
App”
· “2.7 Performing a spray distance test”

2.3 Charging the battery via the USB port
The battery can be charged using a USB-C cable. The USB connector power supply unit with USB-C cable is not included in the scope of delivery. If the battery is not fully charged, it may become damaged and, in certain cases, become exhausted or unusable. The battery may only be charged indoors at ambient temperatures between 5 °C and 40 °C.

11
10 8 9
1. Open the USB cover !8. 2. Insert the USB-C connector !9 into the USB port !10 of the
AquaPrecise. If the battery LED !Lb flashes orange, the battery is charging. If the battery LED !Lb lights up permanently green, the battery is fully charged (charging time, see 7. TECHNICAL DATA). 3. Examine the charge status regularly during the charging process. 4. When the battery is fully charged, disconnect the USB-C connector !9 from the USB port !10 of the AquaPrecise. 5. Close the USB cover !8. Note: Irrigation is not possible while charging via the USB-C cable and the programmed watering cycles are skipped.
7

2.4 Installing the GARDENA Bluetooth® App on your mobile device
The free GARDENA Bluetooth® App must be installed on your mobile device (smartphone / tablet) before connecting the AquaPrecise to the device. You can download the GARDENA Bluetooth® App from the Google Play Store or Apple Store or scan the following QR code:
https://eqrco.de/pa/R0NCo6 1. Download the GARDENA Bluetooth® App onto your mobile
device. 2. Install the GARDENA Bluetooth® App on your mobile device. 3. Open the GARDENA Bluetooth® App on your mobile device. 4. Select “Add product”. 5. Select AquaPrecise from the product list. Note: The GARDENA Bluetooth® App will now also guide you through the next steps for setting up the AquaPrecise in the right location.
8

2.5 Selecting the right location for the AquaPrecise
You must first select the right location for the AquaPrecise before installing it, based on the following criteria:
· The max. range is 10 m. Therefore, no contour point may be further than 10 m away from the AquaPrecise.
· The min. range is 2 m. Therefore, no contour point may be within 2 m of the AquaPrecise.
· No direct obstacles (e. g. trees) may be in the irrigation area. · At maximum range, the water jet height can reach approx. 3 m.
This means that even indirect obstacles (e. g. branches) can obstruct the irrigation area. · Avoid abrupt changes to the range, as gentle and large angles describe the contour more accurately. · The solar cell must receive enough direct sunlight (1 2 hours / day). Obstacles (e. g. trees) must not block out sunlight. · The AquaPrecise can also be installed on the very outer edge of the area to be irrigated (e. g. lawn edge). The irrigation area must be positioned between 25° and 360°.
9

2.6 Connecting the AquaPrecise to the GARDENA Bluetooth® App

The AquaPrecise must be connected to the GARDENA Bluetooth® App before using it for the first time.

1. Enable Bluetooth on your mobile device.

The Bluetooth icon is displayed in the status bar on your mobile device.

2. Briefly press the manual !M button on the AquaPrecise.
The AquaPrecise is activated and the battery LED !Lb shows the battery’s charge status (see “3.3.2 Battery LED !Lb”).
3. Hold down the manual !M button on the AquaPrecise for three seconds.
Connection mode is activated for three minutes and the Bluetooth LED !Lp flashes blue during this period. 4. Stand next to the AquaPrecise.
A connection can only be established if the mobile device is close to the AquaPrecise. 5. Open the GARDENA Bluetooth® App on your mobile device. 6. Select AquaPrecise from the product list.
The Bluetooth LED !Lp lights up blue for ten seconds and the AquaPrecise is connected to the GARDENA Bluetooth® App. The AquaPrecise can now be installed.

Note: The GARDENA Bluetooth® App will now also guide you through the next steps for installation. If the AquaPrecise has already been installed, it can now be programmed and configured via the GARDENA Bluetooth® App (see “3.1 Programming the AquaPrecise”).
11

2.7 Performing a spray distance test
We recommend always carrying out the spray distance test before installation (especially in the Pipeline box). The spray distance test is used to check whether the required contour can be irrigated from the selected location. Note: The spray distance test is automatically prompted by the GARDENA Bluetooth® App whenever a new location is added. The AquaPrecise can be aligned in any direction. We recommend setting up the AquaPrecise in the garden so that the connection faces towards the water source. 1. Place the AquaPrecise on the lawn at ground level at the cor-
rectly selected location (see “2.7 Performing a spray distance test”). 2. Temporarily connect the AquaPrecise to the water supply. 3. Turn on the water supply. 4. Briefly press the manual !M button on the AquaPrecise.
The AquaPrecise is activated and the battery LED !Lb shows the battery’s charge status (see “3.3.2 Battery LED !Lb”). 5. Open the GARDENA Bluetooth® App on your mobile device. 6. Move the water jet within the irrigation area (left / right) using the GARDENA Bluetooth App. 7. Increase / decrease the watering distance limit to see if all corners / edges can be irrigated. Tip: If there is anything in the way, you can set a second location for complete coverage of the irrigation area.
8. You can end the spray distance test once you are sure that each contour point can be reached and that there are no obstacles within the area.
9. Shut off the water source. 10. Install the AquaPrecise in the garden.
12

2.8 Installing the AquaPrecise in the garden 2.8.1 (Art. No. 16000) Installing the AquaPrecise on the
mounting plate above ground If you want to use the AquaPrecise at different locations, you can use an additional GARDENA mounting plate (Art. No. 16022). Note: Installation is automatically prompted in the GARDENA Bluetooth® App after the spray distance test.
3
4
2
o 1
1. Place the mounting plate !1 at the specified position on the lawn at ground level according to the spray distance test.
2. Use the supplied hex wrench to screw the three ground screws !2 in the mounting plate !1 and into the ground (perfectly level horizontally). This will ensure that the AquaPrecise does not rotate.
3. Place the AquaPrecise !3 on the mounting plate !1 so that both pins on the bottom are inserted into the openings !o and it is positioned flat on the ground on the mounting plate !1.
13

4. Push the AquaPrecise !3 towards the connection !4 until it locks onto the base plate !1.
5. Connect the connection !4 to the water supply via the Original GARDENA System.
14

2.8.2 (Art. No. 16001 / 16010) Underground installation of the AquaPrecise in the Pipeline box
Note: Installation is automatically prompted in the GARDENA Bluetooth® App after the spray distance test. 1. Place the Pipeline box !5 at the specified position on the lawn
according to the spray distance test. 2. Lay all components on the lawn. 3. Cut the pipes to length. 4. Dig the trenches for the pipes and the Pipeline box !5
(approx. 20 25 cm deep). 5. Fill the trench under the Pipeline box !5 with approx. 6 cm of
gravel. This ensures that the drainage slots in the box function properly.
5
6. Install the Pipeline box !5 in the ground so that the top is flush with the turf. This prevents damage when mowing the lawn.
15

6
4 3

7. For an optional additional ground fastening: Pierce the three holes for the three ground screws in the Pipeline box !5.
8. Use the supplied hex wrench to screw the three ground screws !2 in the Pipeline box !5 and into the ground.
9. Lay the pipes in the trenches.
10. Connect the 3/4″ male thread of the Pipeline box !5 using the connector (Art. No. 2761) and the GARDENA 25 mm connecting pipe (Art. Nos 2700 / 2701 / 2718 / 2792 / 2793).
11. Refill the trenches with soil.

7 4

12. Place the AquaPrecise !3 in the Pipeline box !5 so that the connection !4 of the AquaPrecise faces towards the slot !7 of the Pipeline box !5.
13. Push the AquaPrecise !3 towards the slot !7 until the connection !4 locks into the slot !7.
6
4 3

14. Fit the box cover !6 onto the Pipeline box !5.

OPERATION

3.1 Programming the AquaPrecise
3.1.1 Setting up the AquaPrecise Use the GARDENA Bluetooth® App to set up the AquaPrecise. 1. Connect the AquaPrecise to the GARDENA Bluetooth® App
(see “2.5 Selecting the right location for the AquaPrecise”). 2. Open the GARDENA Bluetooth® App on your mobile device
and continue with the setup process. Note: The GARDENA Bluetooth® App will now also guide you through the next steps for setting up the AquaPrecise.
3.1.2 Functions of the GARDENA Bluetooth® App The GARDENA Bluetooth® App includes the following functions for the AquaPrecise: · Setting locations · Programming a contour · Creating schedules · Water consumption statistics · Winter mode
18

3.1.3 Programming a contour
Up to five individual contours can be programmed on the AquaPrecise using the GARDENA Bluetooth® App. Each contour is assigned to a location.
A maximum of 15 schedules can be created to meet various requirements.
Note: The GARDENA Bluetooth® App will now also guide you through the next steps for programming.
Programming sequence:

Defining sites

Programming contours

Creating schedules

A contour consists of no fewer than two corner points and no more than 360 corner points. Contours must be programmed in clockwise direction. Always start with the first contour point on the far left of the required irrigation area. Contour points can be changed afterwards.
Note: The AquaPrecise permanently regulates the water distribution rate using the “flowBalance valve” and the contour sprinkler head’s rotation speed. This enables water do be distributed evenly without areas overlapping.
The GARDENA-supported schedule also considers the contour size and adjusts irrigation times accordingly. For a manual schedule, the irrigation time and frequency is set (irrigation volume in l/m² is displayed in the GARDENA Bluetooth® App)
3.1.4 Upstream valve mode
The AquaPrecise can also be combined with upstream valves (e. g. GARDENA Water Control).
The integrated valve will be permanently open in this case. The AquaPrecise starts contour irrigation as soon as the integrated turbine detects a water flow.
19

3.2 Manual button

Pressing the manual button can perform the following actions: · press briefly: activates AquaPrecise, battery status display · press twice briefly (within ten seconds): starts manual
irrigation · hold down button (approx. 3 seconds): activates connection
mode · hold down button (approx. 30 seconds): restarts the device
3.2.1 Manual irrigation Briefly press the manual !M button twice(within ten seconds).
Manual irrigation starts, and the irrigation LED !Lw flashes. The manual irrigation time is preset in the GARDENA Bluetooth® App. The contour most recently selected in the GARDENA Bluetooth® App is always irrigated by default. The most recently created contour is selected if manual irrigation has not yet been carried out using the GARDENA Bluetooth® App.
If irrigation that has been started manually overlaps with a programmed schedule, the programmed start time is overridden.
Active irrigation can be stopped by briefly pressing the manual button.

3.2.2 Bluetooth® connection mode Close-range interaction between the AquaPrecise and the mobile device is referred to as Bluetooth®. 1. Hold down the manual !M button on the AquaPrecise for
three seconds. Connection mode is activated for three minutes and the Bluetooth LED !Lp flashes blue during this period. 2. Connect the AquaPrecise to the GARDENA Bluetooth® App (see “2.5 Selecting the right location for the AquaPrecise”).
3.2.3 Restarting devices The AquaPrecise can be restarted. Hold down the manual !M button on the AquaPrecise
for 30 seconds. All LEDs on the AquaPrecise light up and it will restart.
21

3.3 LED display

3.3.1 Irrigation LED !Lw · Lights up blue for ten seconds: active irrigation
3.3.2 Battery LED !Lb After briefly pressing the manual !M button: · Lights up green: battery > 20 % charged · Lights up red: battery 20 % (irrigation cannot be started) · Flashes red: battery 5 % (current irrigation is suspended) When operating with an upstream valve (e. g. GARDENA Water Control): internal valve closes if battery charge is 5 % and opens if it is 20 % During the charging process: · Flashes orange: battery is charging · Lights up green: battery is charged
3.3.3 Bluetooth LED !Lp · Flashes blue: Bluetooth connection mode active · Lights up blue for ten seconds: Connection with mobile device
active

MAINTENANCE

4.1 Removing / disconnecting the AquaPrecise
We recommend removing the AquaPrecise !3 from the mounting plate !1 or removing it from the Pipeline box !5 before carrying out any cleaning work.
4.1.1 (Art. No. 16000) Removal from the mounting plate
11 3 12 4
e
1. Press the locking mechanism !e and pull the AquaPrecise !3 out of the connection !4 towards the rear.
2. Remove the AquaPrecise !3 from the mounting plate !1 by pulling it upwards.
23

4.1.2 (Art. No. 16001 / 16010) Removal from the Pipeline box
7 4
7 4
1. Pull the locking mechanism of the slot !7 towards the rear and pull the AquaPrecise !3 forwards until the connection !4 is free.
2. Remove the AquaPrecise !3 by pulling it upwards out of the Pipeline box !5.
24

4.2 Cleaning the solar cell
To ensure that the battery is always sufficiently charged, the solar cell !11 must be cleaned if it is dirty. Do not use corrosive or abrasive cleaning agents.
11 3 12 4
e
Use a damp cloth to clean the solar cell !11.
25

4.3 Cleaning the dirt filter
If the irrigation range decreases, this could indicate that the dirt filter is dirty.
11 3 12 4
e
1. Unscrew the connection !4 from the AquaPrecise !3. 2. Pull the dirt filter !12 out of the AquaPrecise !3. 3. Clean the dirt filter !12 and the connection !4 under running
water. 4. Reinstall the dirt filter !12 by following the above steps in
reverse order.
26

4.4 Cleaning the sprinkler head

An uneven irrigation pattern may indicate that the sprinkler head is dirty.

1. Pull out the locking mechanism !a on the sprinkler head !13. 2. Remove the sprinkler head !13 by pulling it upwards from the
AquaPrecise !3.
14
13
3. Unscrew the nozzle cover !14 from the sprinkler head !13. 4. Clean the nozzle cover !14 and the sprinkler head !13 under
running water. 5. Reinstall the sprinkler head !13 by following the above steps in
reverse order. 6. Push the locking mechanism !a back into the sprinkler head !13.
27

4.5 Cleaning the turbine area
If the irrigation range increases, this could indicate that the flow turbine area is dirty.
15 16
17
19
1. Unscrew the turbine cover !15 from the bottom !19 of the AquaPrecise !3.
2. Remove the turbine !16 from the turbine cover !15. 3. Rinse out the turbine area !17 with water. 4. Clean the turbine cover !15 and turbine !16 under running water. 5. Reinstall the turbine cover !15 and turbine !16 by following the
above steps in reverse order.
28

STORAGE

5.1 Shutting down
The product must be stored away from children. The AquaPrecise is not frost-proof and must therefore be stored in a frost-proof environment over the winter.
5.1.1 (16000) AquaPrecise above ground 1. Shut off the water source (tap) or detach the water supply from
the pump. 2. Connect the AquaPrecise to the GARDENA Bluetooth® App
(see “2.5 Selecting the right location for the AquaPrecise”). 3. In the GARDENA Bluetooth® App, go to the settings and
open the valve and suspend the schedules. 4. Disconnect the hose from the AquaPrecise. 5. Remove the AquaPrecise from the mounting plate !1
(see “4.1.1 (Art. No. 16000) Removal from the mounting plate”). 6. Clean the AquaPrecise (solar cell, dirt filter, sprinkler head and turbine area), see “4. MAINTENANCE”. 7. Charge the battery via the USB port !10 (see “2.3 Charging the battery via the USB port”). 8. Store the AquaPrecise in a dry, enclosed and frost-proof location. 9. Select “Winter mode” in the GARDENA Bluetooth® App. The AquaPrecise is in standby mode to save energy and the schedules are suspended.
29

5.1.2 (16001 / 16010) AquaPrecise underground 1. Shut off the water source (tap) or detach the water supply from
the pump. 2. Connect the AquaPrecise to the GARDENA Bluetooth® App
(see “2.5 Selecting the right location for the AquaPrecise”). 3. In the GARDENA Bluetooth® App, go to the settings and
open the valve and suspend the schedules. 4. Wait until the water drains away via the GARDENA drain
valve (Art. No. 2760) or purge the system using the GARDENA drain valve set (Art. No. 2770). 5. Remove the AquaPrecise from the Pipeline box !5 (see “4.1.2 (Art. No. 16001/16010) Removal from the Pipeline box”). 6. Clean the Pipeline box !5.
18
6
7. Place the box lid !18 on the box cover !6. This prevents objects or animals from falling into the installation box.
8. Clean the AquaPrecise (solar cell, dirt filter, sprinkler head and turbine area), see “4. MAINTENANCE”.
30

9. Charge the battery via the USB port !10 (see “2.3 Charging the battery via the USB port”).
10. Store the AquaPrecise in a dry, enclosed and frost-proof location.
11. Select “Winter mode” in the GARDENA Bluetooth® App. The AquaPrecise is in standby mode to save energy and the schedules are suspended.
5.1.3 Reactivating AquaPrecise after winter The Bluetooth connection is disabled in winter mode (standby) to save energy. 1. Charge the battery via the USB port !10 (see “2.3 Charging the
battery via the USB port”). 2. Briefly press the manual !M button on the AquaPrecise.
The AquaPrecise is activated and the battery LED !Lb shows the battery’s charge status (see “3.3.2 Battery LED !Lb”). 3. Connect the AquaPrecise to the GARDENA Bluetooth® App (see “2.6 Connecting the AquaPrecise to the GARDENA Bluetooth® App”). The schedules are then automatically reactivated.
31

TROUBLESHOOTING

6.1 Replacing the battery
The GARDENA spare parts are available from your GARDENA dealer or from GARDENA Service. Only use an original GARDENA battery
(Art. No. 16000-00.690.00)
20

22 3

1. Unscrew the four screws !20 from the bottom !19 of the AquaPrecise !3.
2. Remove the bottom !19 from the AquaPrecise !3.
3. Unscrew the battery lid !21.
4. Remove the battery !22.
5. Install the new battery !22 by following the above steps in reverse order.

6.2 Error table

Problem Irrigation range is less than during initial commissioning
Irrigation range is greater than during initial commissioning Irrigation pattern is uneven
The AquaPrecise is not responding
No irrigation, schedule is not being carried out
Bluetooth connection not possible Charging error:
Battery LED !Lb flashes
red

Possible cause The dirt filter is dirty. The tap is not opened far enough. Water pressure is too low.
The sprinkler head is dirty. The irrigation range is programmed incorrectly. The turbine is dirty.
The sprinkler head is dirty. The sprinkler head is damaged. The battery is empty.
The protective panel of the solar cell is dirty or covered.
The battery is defective. The battery is empty.
No water flow. Standby mode is active.
Battery became too hot while charging.

Remedy Clean the dirt filter. Open the tap further.
Increase the water pressure/water supply.
Clean the sprinkler head. Reprogram the irrigation
range. Clean the turbine.
Clean the sprinkler head. Contact GARDENA Service.
Charge the battery via the USB port.
Clean the protective panel or ensure sufficient sunlight.
Replace the battery. Charge the battery via the
USB port. Activate the water flow. Briefly press the manual
button !M.
Allow the battery to cool down.

NOTE: Repairs must only be done by GARDENA service departments or specialist dealers approved by GARDENA. Please contact your GARDENA service department in the event
of other faults (see reverse).
34

TECHNICAL DATA

AquaPrecise

Unit

Lithium-ion battery

mAh

Charging time via USB port

(depending on the battery

charger)

Tap connector connection (Art. No. 16001 / 16010)

Inch

Operating temperature range

°C

Max. water temperature

°C

Pressure range:

AquaPrecise

bar

GARDENA Pipeline system

bar

Irrigation range at 2 bar

Irrigation area at 2 bar

m²

Irrigation sector

Water flow:

Min. range

l/h

Max. range

l/h

Value (Art. No. 16000 / 16001 / 16010) 5000
3 8
3/4 5 60 30
2 12 2 6 2 10 320 25 360
200 600

ACCESSORIES SPARE PARTS

GARDENA Pipeline box

For underground installation.

Art. No. 16021

GARDENA Mounting plate

For above-ground installation.

Art. No. 16022

GARDENA Winter cover

As a replacement for a damaged winter Art. No. 16001-00.600.16 cover.

GARDENA

As a replacement for a damaged nozzle. Art. No. 16000-00.670.00

AquaPrecise nozzle

GARDENA Spare Battery

As a replacement for a defective battery.

Art. No. 16000-00.690.00

9. SERVICE
Up-to-date contact information can be found online at: www.gardena.com/contact

10. DISPOSAL
10.1. Disposing of the product
(in accordance with Directive 2012/19/EU / S.I. 2013 No. 3113) The product must not be disposed of with normal household waste. It must be disposed of in line with local environmental regulations.
IMPORTANT! Dispose of the product through or via your municipal recycling
collection centre.

10.2. Disposing of the battery

Li-ion

The battery contains lithium-ion cells that should not be disposed of with normal household waste at the end of its life.

IMPORTANT!

1. Discharge the lithium-ion cells fully (contact GARDENA Service about this).
2. Ensure that the lithium-ion cell contacts do not short-circuit by placing tape over them.
3. Dispose of the lithium-ion cells properly at or through your local recycling collection point.

11. ASSIGNMENT OF TRADEMARKS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such trademarks by GARDENA is under licence. Apple and the Apple logo are trademarks of Apple Inc., registered in the United States and other countries. App Store is a service mark of Apple Inc., registered in the United States and other countries. Google and the Google Play logo are trademarks of Google LLC. Other trademarks and trade names are those of their respective owners.
38

EU Declaration of conformity

The undersigned hereby certifies as the authorized representative of the manufacturer, GARDENA Germany AB, PO Box 160 89, SE-103 92, Stockholm, Sweden, that, when leaving our factory, the unit(s) indicated below is / are in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards. This certificate becomes void if the unit(s) is / are modified without our approval.

Name of the product:

Irrigation System /

Pipeline Irrigation System

Type:

AquaPrecise

Article number:

16000

16001 / 16010

EU directives:

2006/42/EG

2014/53/EU

2011/65/EU

Harmonised standards:

EN ISO 12100

EN 60730-1

EN 60730-2-8

EN IEC 60730-2-8

Deposited documentation:

GARDENA Manufacturing GmbH, Technische Dokumentation, A. Ochs

Hans-Lorenser-Str. 40, D-89079 Ulm

Year of CE marking

2024

Ulm:

31.12.2024

Authorised representative:

Reinhard Pompe Senior Vice President, Business Unit Watering
39

Declaration of Conformity

[only for UK]

The manufacturer, GARDENA Germany AB, PO Box 160 89, SE-103 92, Stockholm Sweden, hereby certifies, when leaving our factory, the unit(s) indicated below is / are in accordance with the UK Regulations, designated standards of safety and product specific designated standards. This certificate becomes void if the units are modified without our approval.

Description of the product:

Irrigation System /

Type:

Pipeline Irrigation System AquaPrecise

Article number:

16000

UK regulations:

16001 / 16010 S.I. 2008/1597

S.I. 2017/1206

S.I. 2012/3032

Designated standards:

EN ISO 12100

EN 60730-1

EN 60730-2-8

EN IEC 60730-2-8

Deposited documentation:

GARDENA Manufacturing GmbH, Technische Dokumentation, A. Ochs

Hans-Lorenser-Str. 40, D-89079 Ulm

UK Importer:

Husqvarna UK Limited

Ulm:

Preston Road, Aycliffe, County Durham UK DL5 6UP
31.12.2024

Authorised representative:

Reinhard Pompe Senior Vice President, Business Unit Watering
40

Deutschland / Germany GARDENA Manufacturing GmbH Central Service Hans-Lorenser-Straße 40 D-89079 Ulm Produktfragen: (+49) 731 490-123 Reparaturen: (+49) 731 490-290 www.gardena.com/de/kontakt Albania KRAFT SHPK Autostrada Tirane-Durres Km 7 1051 Tirane Phone: (+355) 69 877 7821 info@kraft.al Argentina ROBERTO C. RUMBO S.R.L. Predio Norlog Lote 7 Benavidez. ZC: 1621 Buenos Aires Phone: (+54) 11 5263-7862 ventas@rumbosrl.com.ar Armenia AES Systems LLC Marshal Babajanyan Avenue 56/2 0022 Yerevan Phone: (+374) 60 651 651 masisohanyan@icloud.com Australia Husqvarna Australia Pty. Ltd. Locked Bag 5 Central Coast BC NSW 2252 Phone: (+ 61) (0) 2 4352 7400 customer.service@husqvarna.com.au Austria / Österreich Husqvarna Austria GmbH Industriezeile 36 4010 Linz Tel.: (+43) 732 77 01 01-485 www.gardena.com/at/service/beratung/ kontakt/ Azerbaijan Proqres Xüsusi Firmasi Aliyar Aliyev 212, Baku, Azerbaijan Sales: +994 70 326 07 14 Aftersales: +994 77 326 07 14 www.progress-garden.az info@progress-garden.az Bahrain M.H. Al-Mahroos BUILDING 208, BLOCK 356, ROAD 328 Salhiya Phone: +973 1740 8090 almahroos@almahroos.com Belarus / « » 220118, . , , 7 . (+375) 17 257 00 33 mg@mastergarden.by Belgium Husqvarna Belgium nv Gardena Division Leuvensesteenweg 542 Planet II E 1930 Zaventem België Bosnia / Herzegovina Silk Trade d.o.o. Poslovna Zona Vila Br. 20 Phone: (+387) 61 165 593 info@silktrade.com.ba Brazil Nordtech Maquinas e Motores Ltd. Avenida Juscelino Kubitschek de Oliveira Curitiba 3003 Brazil Phone: (+55) 41 3595-9600 contato@nordtech.com.br www.nordtech.com.br

Bulgaria AGROLAND . 8 , 13 5 1700 .: (+359) 24 66 6910 info@agroland.eu Canada / USA GARDENA Canada Ltd. 125 Edgeware Road Unit 15 A Brampton L6Y 0P5 ON, Canada Phone: (+1) 905 792 93 30 gardena.customerservice@ husqvarnagroup.com Chile REPRESENTACIONES JCE S.A. AV. DEL VALLE NORTE 857 PISO 4 HUECHURABA, SANTIAGO, CHILE Phone: (+ 56) 2 2414 2600 contacto@jce.cl China 788 D703-05 Office Add: Unit3-5, 7F, Livat Tower D, No.788, Jin Zhong Rd., Chang Ning Dist., Shanghai, PRC 200335 Colombia Equipos de Toyama Colombia SAS Cra. 68 D No 25 B 86 Of. 618 Edificio Torre Central Bogota Phone: +57 (1) 703 95 20 /
+57 (1) 703 95 22 servicioalcliente@toyama.com.co www.toyama.com.co Costa Rica Exim CIA Costa Rica Calle 25A, B°. Montealegre Zapote San José Costa Rica Phone: (+506) 2221-5654 /
(+506) 2221-5659 eximcostarica@gmail.com Croatia Husqvarna Austria GmbH Industriezeile 36 4010 Linz Phone: (+43) 732 77 01 01-485 service.gardena@husqvarnagroup.com Cyprus Pantelis Papadopoulos S.A. 92 Athinon Avenue Athens 10442 Greece Phone: (+30) 21 0519 3100 infocy@papadopoulos.com.gr Czech Republic Gardena Service Center Vrbno c/o Husqvarna Manufacturing CZ s.r.o. Jesenická 146 79326 Vrbno pod Pradedem Phone: 800 100 425 servis@gardena.cz Denmark GARDENA DANMARK Lejrvej 19, st. 3500 Værløse Tlf.: (+45) 70 26 47 70 gardenadk@husqvarnagroup.com www.gardena.com/dk Dominican Republic BOSQUESA, S.R.L Carretera Santiago Licey Km. 5 ½ Esquina Copal II. Santiago De Los Caballeros 51000 Dominican Republic Phone: (+1) 809-562-0476 contacto@bosquesa.com.do

Egypt Universal Agencies Co 26, Abdel Hamid Lotfy St. Giza Phone: (+20) 3 761 57 57 Estonia Husqvarna Eesti OÜ Valdeku 132 EE-11216 Tallinn info@gardena.ee Finland Oy Husqvarna Ab Juurakkotie 5 B 2 01510 Vantaa www.gardena.fi France Husqvarna France 9/11 Allée des pierres mayettes 92635 Gennevilliers Cedex France http://www.gardena.com/fr N° AZUR: 0 810 00 78 23 (Prix d’un appel local) Georgia Transporter LLC #70, Beliashvili street 0159 Tbilisi, Georgia Number: (+995) 322 14 71 71 info@transporter.com.ge www.transporter.com.ge Service Address and Importer to Great Britain Husqvarna UK Ltd Preston Road Aycliffe Industrial Park Newton Aycliffe County Durham DL5 6UP Phone: (+44) (0) 344 844 4558 info.gardena@husqvarna.co.uk Greece . . 92 ..104 42 . (+30) 210 5193 100 info@papadopoulos.com.gr Hong Kong Tung Tai Company 151-153 Hoi Bun Road Kwun Tong, Kowloon Hong Kong Phone: (+852) 3583 1662 admin@tungtaico.com Hungary Husqvarna Magyarország Kft. Ezred u. 1 3 1044 Budapest Phone: (+36) 1 251-4161 vevoszolgalat.husqvarna@ husqvarnagroup.com Iceland BYKO ehf. Skemmuvegi 2a 200 Kópavogur Phone: (+354) 515 4000 byko@byko.is MHG Verslun ehf Víkurhvarf 8 203 Kópavogur Phone: (+354) 544 4656 India B K RAMAN AND CO Plot No. 185, Industrial Area, Phase-2, Ram Darbar Chandigarh 160002 India Phone: (+91) 98140 06530 raman@jaganhardware.com Iraq Alshiemal Alakhdar Company Al-Faysalieah, Near Estate Bank Mosul Phone: (+964) 78 18 18 46 75

Ireland Liffey Distributors Ltd. 309 NW Business Park, Ballycoolen 15 Dublin Phone: (+353) 1 824 2600 info@liffeyd.com Israel HAGARIN LTD. 2 Nahal Harif St. 8122201 Yavne internet@hagarin.co.il Phone: (+972) 8-932-0400 Italy Husqvarna Italia S.p.A. Centro Direzionale Planum Via del Lavoro 2, Scala B 22036 ERBA (CO) Phone: (+39) (0) 31 4147700 assistenza.italia@it.husqvarna.com Japan Husqvarna Zenoah Co. Ltd. Japan 1-9 Minamidai, Kawagoe 350-1165 Saitama Japan gardena-jp@husqvarnagroup.com Kazakhstan “” Russian : , . , . , 155/1 .: (+7) (727) 355 64 00 /
(+7) (700) 355 64 00 lamed@lamed.kz
Kazakh -: , ., . , 155/1 .: (+7) (727) 355 64 00 /
(+7) (700) 355 64 00 lamed@lamed.kz Kuwait Palms Agro Production Co Al Rai- Fourth Ring Road Block 56. P.O Box: 1976 Safat 13020 Al-Rai Phone: (+965) 24 73 07 45 info@palms-kw.com Kyrgyzstan OOsO Alye Maki Av. Moladaya Guardia 83 720014 Bishkek Phone: (+996) 312 322115 Latvia Husqvarna Latvija SIA Ulbrokas 19A LV-1021 Rga info@gardena.lv Lebanon Technomec Safra Highway (Beirut Tripoli) Center 622 Mezher Bldg. P.O.Box 215 Jounieh Phone: (+961) 9 853527 /
(+961) 3 855481 tecnomec@idm.net.lb Lithuania UAB Husqvarna Lietuva Ateities pl. 77C LT-52104 Kaunas info@gardena.lt Luxembourg Magasins Jules Neuberg 39, rue Jacques Stas Luxembourg-Gasperich 2549 Case Postale No. 12 Luxembourg 2010 Phone: (+352) 40 14 01 api@neuberg.lu Malaysia Glomedic International Sdn Bhd Jalan Ruang No. 30 Shah Alam, Selangor 40150 Malaysia Phone: (+60) 3-7734 7997 oase@glomedic.com.my

Malta I.V. Portelli & Sons Ltd. 85, 86, Triq San Pawl Rabat – RBT 1240 Phone: (+356) 2145 4289 Mauritius Espace Maison Ltée La City Trianon, St Jean Quatre Bornes Phone: (+230) 460 85 85 digital@espacemaison.mu Mexico AFOSA Av. Lopez Mateos Sur # 5019 Col. La Calma 45070 Zapopan, Jalisco, Mexico Phone: (+52) 33 3818-3434 isolis@afosa.com.mx Moldova Convel SRL Republica Moldova, mun. Chisinau, sos. Muncesti 284 Phone: (+373) 22 857 126 www.convel.md Mongolia Soyolj Gardening Shop Narnii Rd Ulaanbaatar 14230 Mongolia Phone: +976 7777 5080 soyolj@magicnet.mn Morocco Proekip 64 Rue de la Participation Casablanca-Roches Noires 20303 Morocco Phone: (+212) 661342107 hicham.hafani@proekip.ma Netherlands Husqvarna Nederland B.V. GARDENA Division Postbus 50131 1305 AC ALMERE Phone: (+31) 36 521 00 10 info@gardena.nl Neth. Antilles Jonka Enterprises N.V. Sta. Rosa Weg 196 P.O. Box 8200 Curaçao Phone: (+599) 9 767 66 55 info@jonka.com New Zealand Husqvarna New Zealand Ltd. PO Box 76-437 Manukau City 2241 Phone: (+64) (0) 9 9202410 support.nz@husqvarna.co.nz North Macedonia Sinpeks d.o.o. Ul. Kravarski Pat Bb 7000 Bitola Phone: (+389) 47 20 85 00 sinpeks@mt.net.mk Norway Husqvarna Norge AS Gardena Division Trøskenveien 36 1708 Sarpsborg info@gardena.no Northern Cyprus Mediterranean Home & Garden No 150 Alsancak, Karaolanolu Caddesi Girne Phone: (+90) 392 821 33 80 info@medgardener.com Oman General Development Services PO 1475, PC – 111 Seeb 111 Oman Phone: 96824582816 gdsoman@gdsoman.com

Paraguay Agrofield SRL AV. CHOFERES DEL CHACO 1449 C/25 DE MAYO Asunción Phone: (+595) 21 608 656 consultas@agrofield.com.py Peru Sierras y Herramientas Forestal SAC Av. Las Gaviotas 833, Chorrillos Lima Phone: (+51) 1 2 52 02 52 supervisorventas1@siersac.com www.siersac.com Philippines Royal Dragon Traders Inc 10 Linaw Street, Barangay Saint Peter Quezon City 1114 Philippines Phone: (+63) 2 7426893 aida.fernandez@rdti.com.ph Poland Gardena Service Center Vrbno c/o Husqvarna Manufacturing CZ s.r.o. Jesenická 146 79326 Vrbno pod Pradedem Czech Republic Phone: (22) 336 78 90 serwis@gardena.pl Portugal Husqvarna Portugal, SA Lagoa – Albarraque 2635 – 595 Rio de Mouro Phone: (+351) 21 922 85 30 Fax: (+351) 21 922 85 36 info@gardena.pt Romania Madex International Srl Soseaua Odaii 117 – 123, RO 013603 Bucureti, S1 Phone: (+40) 21 352 7603 madex@ines.ro Russia / ,,” 141400, ., . , , 39, .6 ,, “, 02_04 http://www.gardena.ru Saudi Arabia SACO Takhassusi Main Road P.O. Box: 86387 Riyadh 12863 40011 Saudi Arabia Phone: (966) 11 482 8877 webmaster@saco-ksa.com Al Futtaim Pioneer Trading 5147 Al Farooq Dist. Riyadh 7991 Phone: (+971) 4 206 6700 Owais.Khan@alfuttaim.com Serbia Domel d.o.o. Slobodana uria 21 11000 Belgrade Phone: (+381) 11 409 57 12 office@domel.rs Singapore Hy-Ray PRIVATE LIMITED 40 Jalan Pemimpin #02-08 Tat Ann Building Singapore 577185 Phone: (+65) 6253 2277 info@hyray.com.sg Slovak Republic Gardena Service Center Vrbno c/o Husqvarna Manufacturing CZ s.r.o. Jesenická 146 79326 Vrbno pod Pradedem Phone: 0800 154044 servis@gardena.sk

Slovenia Husqvarna Austria GmbH Industriezeile 36 4010 Linz Phone: (+43) 732 77 01 01-485 service.gardena@husqvarnagroup.com South Africa Husqvarna South Africa (Pty) Ltd Lifestyle Business Park Ground Floor Block A Cnr Beyers Naude Drive and Ysterhout Road Randpark Ridge, Randburg Phone: (+27) 10 015 5750 service@gardena.co.za South Korea Kyung Jin Trading Co., Ltd 8F Haengbok Building, 210, Gangnam-Daero 137-891 Seoul Phone: (+82) 2 574 6300 kjh@kjh.co.kr Spain Husqvarna España S.A. Calle de Rivas nº 10 28052 Madrid Phone: (+34) 91 708 05 00 atencioncliente@gardena.es Sri Lanka Hunter & Company Ltd. 130 Front Street Colombo Phone: 94-11 232 81 71 hunters@eureka.lk Suriname Deto Handelmaatschappij N.V. Kernkampweg 72-74 P.O. Box: 12782 Paramaribo Suriname Phone: (+597) 43 80 50 info@deto.sr Sweden Husqvarna AB / GARDENA Sverige Drottninggatan 2 561 82 Huskvarna Sverige Phone: (+46) (0) 36-14 60 02 service@gardena.se Switzerland / Schweiz Husqvarna Schweiz AG Consumer Products Industriestrasse 10 5506 Mägenwil Phone: (+ 41) (0) 62 887 37 90 info@gardena.ch Taiwan Hong Ying Trading Co., Ltd. No. 46 Wu-Kun-Wu Road New Taipei City Phone: (+886) (02) 2298 1486 salesgd1@7friends.com.tw Tajikistan ARIERS JV LLC 39, Ayni Street, 734024 Dushanbe, Tajikistan Thailand Spica Co. Ltd 243/2 Onnuch Rd., Prawat Bangkok 10250 Thailand Phone: (+66) (0)2721 7373 surapong@spica-siam.com Tunisia Société du matériel agricole et maritime Nouveau port de peche de Sfax Bp 33 Sfax 3065 Phone: (+216) 98 419047/
(+216) 74 497614 commercial@smamtunisia.com Türkiye Dost Bahçe Yunus Mah. Adil Sk. No:3 Kartal Istanbul 34873 Türkiye Phone: (+90) 216 389 39 39

Turkmenistan I.E. Orazmuhammedov Nurmuhammet 80 Ataturk, BERKARAR Shopping Center, Ground floor, A77b, Ashgabat 744000 TURKMENISTAN Phone: (+993) 12 468859 Mob: (+993) 62 222887 info@jayhyzmat.com / bekgiyev@jayhyzmat.com www.jayhyzmat.com UAE Al-Futtaim ACE Company L.L.C Building, Al Rebat Street Festival City, Dubai 7880 UAE Phone: (+971) 4 206 6700 ace@alfuttaim.ae Ukraine / «» 4 08130, . – -. . .: (+38) 0 800 503 000 Uruguay FELI SA Entre Ríos 1083 11800 Montevideo Phone: (+598) 22 03 18 44 info@felisa.com.uy Uzbekistan AGROHOUSE MChJ O’zbekiston, 111112 Toshkent viloyati Toshkent tumani Hasanboy QFY, THAY yoqasida Phone: (+998)-93-5414141 /
(+998)-71-2096868 info@agro.house www.agro.house Vietnam Vision Joint Stock Company BT1-17, Khu biet thu Khu oan ngoai giao Nguyen Xuan Khoat Xuan inh, Bac Tu Liem Hanoi, Vietnam Phone: (+8424)-38462833/34 quynhnm@visionjsc.com.vn Zimbabwe Cutting Edge 159 Citroen Rd, Msasa Harare Phone: (+263) 8677 008685 sales@cuttingedge.co.zw
16000-20.962.01/12.24 © GARDENA Manufacturing GmbH D-89079 Ulm https://www.gardena.com 42

Documents / Resources

GARDENA 16001 Pipeline Irrigation System [pdf] Instruction Manual
16000, 16001, 16010, 16001 Pipeline Irrigation System, 16001, Pipeline Irrigation System, Irrigation System

References

User Manual

GARDENA 16001 Pipeline Irrigation System

Specifications

Product Usage Instructions

FAQs

SAFETY INSTRUCTIONS

INSTALLATION

OPERATION

MAINTENANCE

STORAGE

TROUBLESHOOTING

TECHNICAL DATA

ACCESSORIES SPARE PARTS

Documents / Resources

References

Leave a comment

Cancel reply