GANCUBE GAN13 Maglev Next GAN Speed Cube
INTRODUCTION
- Thanks for choosing the GAN cubes.
- GAN cube has earned its name in speedcubing through its beauty performance, and state-of-the-art quality.
- The omnidirectional core positioning 3.0 system carried by the GAN13 series not only successfully realizes the hybrid propulsion of magnetic attraction and repulsion, but also realizes the comprehensive digital debugging of wheelbase, elastic force, and magnetic force.
- The adjustability is greatly improved, which is sufficient to adapt to different rubers’ turning styles and hand-feel preferences.
- Let the GAN cube unleash your speed.
SPECIFICATIONS
GAN Adjustment Systems GES & GMS
The key factors determining how your cube feels
Note: GMSv5 is available in GAN13 Maglev only.
Magnetic GES v2
6 center travel settings & 6 tension settings
GAN13 Maglev is equipped with Magnetic GESv2 which is unique to GAN cubes and can adjust the center travel and tension by adjusting the numerical distancing nut and magnetic rings.
- Magnetic GES v2: Center Travel (Numerical Distancing Nut)
- CenterTravel: 1 <2<3<4<5<6
- 6 center travel options, the smaller the number, the tighter the cube feels.
Center Travel Adjustment
- Put the tool into the adjusting slot and then toggle the numerical distancing nut clockwise to adjust the center travel. You will feel a click with every turn as the nut moves.
Magnetic GES v2:
- Tension (Tension Nut & Precise Center Piece)
- Each turn clockwise increases the tension by one grade.
Tension Adjustment
- Put the tool into the adjusting slot and then toggle the magnetic tension nut clockwise to adjust the tension. You will feel a click with every turn as the nut moves downward.
GMS v5
- Note: GMS v5 is available in GAN13 Maglev only.
Fast switching between 6 different magnet settings
- GAN13 Maglev adopts a brand-new magnet positioning system, with the GAN’s magnet core providing the major magnet force, compensated by magnets between the edge & corner pieces.
- It gives the cube a perfect combination of low start-up resistance and unprecedented stable magnetic output when turning.
- Magnet adjustment is operated at the 8 comer pieces with 6 different magnet settings.
- Magnet Strength: 1 < 2 < 3 < 4< 5 < 6
- 6 settings of magnet strength, the smaller the number, the weaker the magnet strength.
Magnet Adjustment
- Turn the outer layer 45° to expose the magnet slots on the corner pieces. Use the adjusting tool to toggle the lever to the desired setting.
Video Instruction
- Tension & Magnet Adjustment
- GANCUBE.COM
- Follow GANCUBE on Instagram.
- For more speedcubing stuff
Documents / Resources
 |
GANCUBE GAN13 Maglev Next GAN Speed Cube [pdf] User Manual GAN13, GAN13 Maglev Next GAN Speed Cube, Maglev Next GAN Speed Cube, GAN Speed Cube, Speed Cube, Cube |