GAMEMAX VISTA Gaming Computer Case
Package Content
Connectors
I/O Panel
Exploded View
- Tempered glass front panel
- Tempered glass left side panel
- Right side panel
- Chassis
- HDD bracket
- Motherboard plate fan x2(included)
- PSU cover tan x3(included)
- Rear fan x1(included)
- Mangnetic dust filter on top
- Mangnetic dust filter on side
- Dust filter at the bottom
- V4.0 PWM ARGB HUB(included)
Installation Guide
- Remove the side panels.
- Insert PSU from left side, secure with screws.
- Insert the MB IO Shield, and then place the motherboard on the corresponding position and secure with screws.
Note: If install ATX motherboard, pls remove the fan on the power cover first, and then fix the fan again after motherboard is installed. - Remove the PCI-E bracket;
Install the GPU card. - 3.5″ HDD hard drive installation position is compatible with 2.5″ SSD.
- Install 2.5″ SSD.
Cooling System
- Fan Cooling System:
- Top: 3x120mm, 2x140mm(Optional)
- M/B Plate: 2x120mm(Included)
- PSU Cover: 3x120mm(Included)
- Rear: 1x120mm(Included)
- Liquid Cooling System:
- Top: 120/140/240/280/360mm(Optional)
- M/B Cover: 120/240mm(Optional)
- Rear: 120mm(Optional)
Airflow Direction
Pay attention to the airflow direction inside the chassis.
V4.0 PWM ARGB HUB
Documents / Resources
![]() |
GAMEMAX VISTA Gaming Computer Case [pdf] User Manual 250107, VISTA Gaming Computer Case, VISTA, Gaming Computer Case, Computer Case, Case |