GAGGIA EG5603 Automatic Espresso Machine
Specifications
- Product: GAGGIA CADORNA PRESTIGE EG5603 (SUP 049EU)
- Control Panel: Espresso, Coffee, Cappuccino, Latte Macchiato, ON/OFF, My favourites, Home, Clean/Setting, Start/Stop
- Beverage Menu: Milk 30ml, Hot Water 150ml, Water 150ml
Product Usage Instructions
- Control Panel Overview
- The control panel consists of various buttons for selecting different beverage options and settings. Refer to the user manual for detailed descriptions of each button’s function.
- First Installation
- Before using the machine for the first time, ensure proper installation. Follow the instructions provided in the manual for setting up the machine correctly.
- Water Hardness Level Adjustment
- To set the correct water hardness level, navigate to the appropriate menu option on the display panel. Follow the on-screen instructions to adjust the water hardness level according to your preference.
- Intenza+ Water Filter
- Consider using the Intenza+ water filter for optimal water quality. Refer to the user manual for instructions on installing and replacing the water filter.
FAQs
- Q: How do I start brewing espresso using the GAGGIA CADORNA PRESTIGE?
- A: Press the Espresso button on the control panel, place your cup under the spout, and wait for the machine to brew your espresso.
- Q: How can I program my favorite drink settings?
- A: Use the My Favourites button to save your preferred drink settings for quick and easy access in the future. Consult the manual for detailed programming instructions.
- Q: How do I clean the machine?
- A: Navigate to the Clean/Setting option on the control panel for cleaning instructions. Regular maintenance is crucial to ensure the machine’s longevity and performance.
English 7
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not
immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when the appliance is used by or near
children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet. 12. Do not use appliance for other than intended use. 13. Save these instructions.
SAVE THESE INSTRUCTIONS
8 English
CAUTION
This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only. 1. Check voltage to be sure that the voltage indicated on the nameplate
corresponds with your voltage. 2. Never use warm or hot water to fill the water tank. Use cold water only. 3. Keep your hands and the cord away from hot parts of the appliance
during operation. 4. Never clean with scrubbing powders or harsh cleaners. Simply use a
soft cloth dampened with water. 5. For optimal taste of your coffee, use purified or bottled water. Periodic
descaling is still recommended every 2-3 months. 6. Do not use caramelized or flavored coffee beans.
INSTRUCTIONS FOR THE POWER SUPPLY CORD
A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
B. Longer detachable power-supply cords or extension cords are available and may used if care is exercised in their use.
C. If a long detachable power-supply cord or extension cord is used, 1. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance 2. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and 3. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
English 9
Important safety information
This machine is equipped with safety features. Nevertheless, read and follow the safety instructions carefully and only use the machine as described in these instructions, to avoid accidental injury or damage due to improper use of the machine. Keep this safety booklet for future reference.
Warning
General
– Check if the voltage indicated on the machine corresponds to the local mains voltage before you connect the appliance.
– Connect the machine to an earthed wall socket. – Do not let the power cord hang over the edge of a table or worktop and do not let
it touch hot surfaces. – To avoid the danger of electric shock, never immerse the machine, mains plug or
power cord in water or any other liquid. – Do not pour liquids on the power cord connector. – To avoid the danger of burns, keep body parts away from hot water jets produced
by the machine. – Do not touch hot surfaces. Use handles and knobs. – Switch off the machine with the main switch located on the back (if present) and
remove the mains plug from the wall socket: · If a malfunction occurs. · If you are not going to use the appliance for a long time. · Before you clean the machine. – Pull at the plug, not at the power cord. – Do not touch the mains plug with wet hands. – Do not use the machine if the mains plug, the power cord or the machine itself is
damaged. – Do not make any modifications to the machine or its power cord. – Only have repairs carried out by a service center authorized by Gaggia to avoid a
hazard. – The machine should not be used by children younger than 8 years old. – This machine can be used by children aged from 8 years and above and
by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the machine in a safe way and if they understand the hazards involved. – Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. – Keep the machine and its cord out of the reach of children aged less than 8 years. – Children should be supervised to ensure that they do not play with the machine. – Never insert fingers or other objects into the coffee grinder. – Be careful when you dispense hot water.
10 English
Dispensing may be preceded by small jets of hot water. Wait until the end of the dispensing cycle before you remove the hot water dispensing spout.
Caution
General
– This machine is intended for normal household use only. It is not intended for use in environments such as staff kitchens of shops, offices, farms or other work environments.
– Always put the machine on a flat and stable surface. Keep it in upright position, also during transport.
– Do not place the machine on a hotplate or directly next to a hot oven, heater or similar source of heat.
– Only put roasted coffee beans in the bean hopper. Putting ground coffee, instant coffee, raw coffee beans or any other substance in the coffee bean hopper may cause damage to the machine.
– Let the machine cool down before you insert or remove any parts. The heating surfaces may retain residual heat after use.
– Never fill the water tank with warm, hot or sparkling water, as this may cause damage to the water tank and the machine.
– Never use souring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the machine. Simply use a soft cloth dampened with water.
– Descale your machine regularly. The machine indicates when descaling is needed. Not doing this will make your appliance stop working properly. In this case repair is not covered by your warranty.
– Do not keep the machine at temperatures below 0°C/32°F. Water left in the heating system may freeze and cause damage.
– Do not leave water in the water tank when you are not going to use the machine for a long period of time. The water can become contaminated. Use fresh water every time you use the machine.
– Never use any accessories or parts from other manufacturers or that Gaggia does not specifically recommend. If you use such accessories or parts, your warranty becomes invalid.
– Regular cleaning and maintenance prolongs the lifetime of your machine and ensures optimum quality and taste of your coffee.
– The machine is exposed continuously to moisture, coffee and scale. Therefore it is very important to regularly clean and maintain the machine as described in the user manual and shown on the website. If you do not perform these cleaning and maintenance procedures, your machine eventually may stop working. In this case repair is not covered by warranty.
– Do not clean the brew group in the dishwasher and do not use washing-up liquid or a cleaning agent to clean it. This may cause the brew group to malfunction and may have a negative effect on the coffee taste.
– Do not dry the brew group with a cloth to prevent fibers from collecting inside the brew group.
– Never drink the solution dispensed during the descaling process.
English 11
– Only put preground coffee into the preground coffee compartment. Other substances and objects may cause severe damage to the machine. In this case, repair is not covered by your warranty.
– The machine shall not be placed in a cabinet when in use.
Machines with milk carafe
Warning
– To avoid the danger of burns, be aware that dispensing may be preceded by jets of milk and steam. Wait until the end of the cycle before you remove the milk carafe.
Caution
– Make sure that the milk carafe is installed and the milk dispensing spout is open before you select a milk-based coffee beverage or milk froth.
– Do not put any other liquids in the milk jug/carafe than water (for cleaning) or milk.
– Do not clean the milk carafe in the dishwasher.
Electromagnetic fields (EMF)
This machine complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
Recycling
– This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).
– Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.
Warranty and support
For service or support, contact your local dealer or an authorized service center. Contact details are included in the warranty booklet supplied separately or visit www.gaggia.com or www.gaggia.it.
12 English
Congratulations on purchasing the Gaggia Cadorna Prestige! This easy-to-use machine guarantees excellent coffee drinks, every day. With its intuitive interface, you can choose from among 15 beverages, customise them and save them to the 4 available profiles, where they can be instantly brought up whenever you want. Before being packed, each of our high-quality machines undergoes rigorous testing in our laboratories to ensure it works perfectly. Because real coffee is used during testing, some residue may remain. This does not compromise the integrity of the product: it is a brand new machine.
Please read the whole manual carefully before you instal, use or clean your machine. Before using it for the first time, please read carefully the safety manual provided separately and store it for future use.
Machine Overview (Fig.2)
1 Coffee bean container lid 2 Coffee bean container 3 Power cord socket 4 Water tank 5 Pre-ground coffee compartment 6 Coffee grinder adjustment knob 7 Control panel 8 Adjustable coffee dispensing spout 9 Coffee pucks container 10 Drip tray 11 Drip tray grid 12 “Full drip tray” indicator
13 Espresso tray 14 Power cord 15 Drip tray mat 16 Lubricant 17 Pre-ground coffee measuring scoop 18 Water hardness tester 19 Service door 20 Coffee residues drawer 21 Brew group 22 Drip tray release buttons 23 Milk carafe 24 Water dispensing spout
English 13
Control Panel and Display
This coffee machine features an easy-to-use, intuitive display. Please see below for an in-depth explanation of each button.
Control panel overview (fig. 1)
1/2 MULTIFUNCTION buttons
Selects the function shown on the display.
3 ON/OFF button
To switch the machine on or off.
4 MY FAVOURITES button Opens the personal profiles menu.
5 HOME button
Opens the beverage menu.
6
CLEAN/SETTING button
7 START/STOP button
Opens the cleaning and settings menu.
Starts/stops the dispensing of the selected beverage, or starts/stops the procedure indicated on the display.
Note: the MY FAVOURITES , HOME , CLEAN/SETTING
buttons are
also ESC buttons. You can exit any screen shown on the display at any time by
pressing one of these buttons, which will then bring you back to their initial menu.
ESPRESSO
COFFEE
CAPPUCCINO
LATTE MACCHIATO
Multifunction buttons
Use the multifunction buttons at the sides of the display to select the feature or beverage indicated on the screen.
Note: To make the reading of this manual easier, <<press the button ” “>> means <<press the button related to ” “>>.
14 English
First Installation
Before using the machine, it is essential to follow a few simple steps, clearly described in the explanatory drawings found in the quick guide at the beginning of this instruction manual.
Note: To make the best-tasting coffee, you should brew 5 coffees initially to allow the machine to complete its self-adjustment.
ESPRESSO
COFFEE
CAPPUCCINO
LATTE MACCHIATO
COFFEE 30 ml
TEMP medium
ESPRESSO
my favourites
HOME
clean/setting
START/STOP
Manual rinse cycle
When first installing the machine or after a long period of its inactivity, it is necessary to prime the water circuit through the manual rinse cycle. 1 Place a container under the coffee dispensing spout, browse through the
pages and select “ESPRESSO LUNGO”.
2 Press the ” “button without adding pre-ground coffee.
3 Press the START/STOP dispense hot water.
button to start dispensing, the machine will
4 Empty the container and make sure the water dispensing spout is installed.
5 Place the container under the water dispensing spout and select the ” HOT WATER ” beverage.
6 Press the START/STOP button to commence dispensing.
7 Empty the container and repeat steps 6 to 7, until the water tank is empty.
8 At the end of this operation, fill the water tank again up to the MAX level. The machine is now ready for use.
1 sec.
English 15
Measuring water hardness
You’ll need to set the water hardness when you install your machine.
Take the water hardness measuring strip that you find in the box and follow the
steps shown on the display during installation. To adjust the water hardness
setting later, press the CLEAN/SETTING
button, select ” SETTINGS “, and then
” WATER HARDNESS ” from the settings menu.
1 Immerse the water hardness measuring strip in a glass of water for 1 second. Remove the strip from the water and wait 1 minute.
2 Note how many squares turn red.
3 Use the green ” ” and ” ” buttons to select the water hardness according to the table below. Confirm the setting by pressing ” “.
Small red squares
Value to set
1 2 3 4
Water hardness
very soft water soft water hard water
very hard water
INTENZA+
A A B C
INTENZA+ Water Filter
We recommend using the INTENZA+ water filter to limit the formation of limescale. This ensures the machine will last longer and the aroma of your coffee will be better.
Water is an essential element in brewing coffee: it is therefore extremely important to ensure it is always filtered adequately.
The INTENZA+ water filter prevents the formation of mineral deposits, improving the quality of the water.
16 English
Installing the INTENZA+ water filter
Remove the small white filter from the water tank and store it in a dry place.
Immerse the INTENZA+ water filter vertically (with the opening pointing up) in cold water and gently press its sides to let any air bubbles out.
Remove the INTENZA+ water filter from the water. Set the machine according to the detected water hardness (see the “Measuring water hardness” chapter) and the letters found on the filter base:
A = soft water 1 or 2 small squares B = hard water (standard) 3 small squares C = very hard water 4 small squares
Place the INTENZA+ filter in the water tank, ensuring it is correctly in place. Refill the water tank and place it in its compartment.
Press the CLEAN/SETTING
button, select ” SETTINGS “, and then ” WATER
FILTER ” from the settings menu.
Follow the instructions shown on the display to activate the filter.
Note: you can pause the filter activation procedure by pressing the START/STOP button. To resume the procedure, press the START/STOP button again.
Filter expired, replace or disable it
WATER FILTER
REPLACE
ACTIVATE DISABLE
Replacing the INTENZA+ water filter
When the INTENZA+ water filter runs out, the display will show a warning message.
1 Replace or disable by pressing the CLEAN/SETTING ” SETTINGS ” button.
button, and then the
2 Select the ” WATER FILTER ” button.
3 Select ” REPLACE ” to change the filter or ” DISABLE ” if you do not intend to use the filter. Confirm with the ” ” button.
Follow the instructions shown on the display to activate the filter correctly.
Note: If you do not want to replace the filter, select “DISABLE” to disable it.
Types of Beverage
English 17
Beverage name Ristretto Espresso
Espresso lungo Coffee Americano Over ice Cappuccino XL Cappuccino Cortado Flat white Café au lait Latte macchiato XL latte macchiato Frothed milk Hot water
Description
A ristretto, served in a small cup, is an espresso whose brewing time is shorter than a regular espresso. As such, a ristretto is a shorter shot and lower in caffeine.
The espresso is known around the globe as true “Italian coffee”. Served in a small cup, its unmistakeable characteristics are a full and intense aroma and a top layer of compact, natural crema. It is the result of the hot-water pressurised extraction process invented by Achille Gaggia in 1938.
An espresso lungo is an espresso shot with a longer extraction time. It is more diluted, with a different aromatic intensity and a higher caffeine content. It is served in a medium-sized cup.
Coffee is a beverage prepared with a greater quantity of water than an espresso shot. It has a lighter aroma and is served in a medium-large cup.
An Americano is a long, less intense coffee drink prepared by combining hot water and espresso.
It’s a coffee brewed at a lower temperature with a reduced flow rate to be poured into a glass or cup over ice cubes. It results in a slightly smoother and sweeter taste.
The cappuccino is an Italian classic, among the most loved in the world. It is prepared with espresso, milk and a milk froth, which must be no less than 1 cm thick. It is served in a large cup.
An XL cappuccino is a cappuccino prepared with a greater quantity of espresso and milk.
The cortado is an Argentinian beverage, consisting of an espresso shot with a small quantity of milk. It is usually served in a small glass and is popular in Spain, Portugal, and Latin America.
A flat white is a beverage of Australian origin which has a strong, dominant coffee flavour. It is composed of a double espresso and milk, toped with a light layer of velvety foam.
A café au lait is a beverage composed of equal parts coffee and milk. This can even be enriched by a thin layer of milk froth. It is served in a large cup.
A latte macchiato is prepared with hot milk, one part milk froth and a small quantity of espresso. It is served in a tall, transparent glass to allow the separation of the three different layers to be seen.
An XL latte macchiato is a latte macchiato prepared with a greater quantity of milk. It is served in a tall, transparent glass.
Frothed milk is used to make cappuccinos, latte macchiatos and several other beverages. The result is a compact, homogeneous layer of milk froth.
Hot water can be used to prepare hot teas, infusions and instant beverages.
18 English
Espresso tray
This machine was designed to guarantee flawless results, from a traditional espresso to a number of different beverages. If you wish to try a traditional Italian espresso, with a delicious layer of natural crema on the surface, we recommend using the “Espresso Tray”, which has been specifically designed for and integrated into the machine. This tray makes it possible to use traditional espresso cups, ensuring the perfect height from the spout for compact, homogeneous crema and dispensation without messy splashes.
Brewing coffee
Note: After dispensing a cold drink, the machine may dispense at a slightly lower temperature. We recommend brewing first a coffee by selecting the pre-ground function without adding coffee.
Brewing coffee from whole coffee beans
Warning: always use whole coffee beans when making espresso. Do not put any pre-ground, unroasted, freeze-dried or instant coffee in the coffee bean container, as they may damage the machine.
Tip: Preheat the cups with hot water to enjoy a hotter coffee.
1 Remove the espresso tray, place an espresso cup beneath the coffee dispensing spout, raising or lowering it according to the size of the cup being used. Press the HOME button to bring up the beverage menu.
ESPRESSO
COFFEE
CAPPUCCINO
LATTE MACCHIATO
COFFEE 30 ml
TEMP medium
ESPRESSO
my favourites
HOME
clean/setting
START/STOP
2 Browse the various pages to find and select the desired beverage.
3 Once the beverage is selected, it is possible to prepare two cups at the same time using the ” ” button, except the “AMERICANO”.
4 Finally, press the START/STOP button to begin dispensing the coffee. Note: you can interrupt the brewing at any time by pressing the START/STOP button. If you wish to customise the settings of a specific beverage, please refer to the “Beverage customisation” chapter.
COFFEE 30 ml
TEMP medium
ESPRESSO
English 19
Brewing coffee using pre-ground coffee
Use the measuring scoop provided to insert the correct dose in the pre-ground coffee compartment.
1Lift the lid of the pre-ground coffee compartment and add one level measuring scoop of pre-ground coffee.
Warning: do not insert anything other than pre-ground coffee in the pre-ground coffee compartment, for not damage the machine.
2Place a cup under the coffee dispensing spout and select the desired beverage.
3Press the ” ” button. Note: the “pre-ground coffee” function cannot dispense two cups of coffee at the same time, and it disables the aroma setting, both of which are possible with coffee beans only. Note: this function is not available for FLAT WHITE 4Press the START/STOP button to start dispensing the coffee.
If you wish to customise the settings of a specific beverage, please refer to the “Beverage customisation” chapter.
Note: you can interrupt the brewing at any time by pressing the START/STOP button.
Brewing coffee over ice
Note: the coffee is brewed at a lower temperature. For an optimal result, pour it over ice cubes and interrupt the automatic rinse cycle if the overice coffee is the first beverage brewed when the machine is switched on. 1Take a glass and fill it halfway with ice cubes. (about 6 ice cubes for the factory
set beverage). 2Place the glass under the coffee dispensing spout. 3Select the OVER ICE beverage.
We recommend using the aroma 5 or coffee boost for a more intense taste. 4Press the START/STOP button to start brewing.
Note: if you select the coffee boost or pre-ground coffee it is not possible to brew 2 cups at the time.
Note: after dispensing a hot drink or steam, the machine may dispense at a slightly higher temperature. We recommend brewing an over ice coffee first by selecting the pre-ground function without adding coffee.
20 English
Preparation of frothed-milk based coffee beverages
Filling the milk carafe
Note: Before using the milk carafe, clean it thoroughly as described under the “Cleaning the milk carafe” chapter.
The milk carafe can be filled before or during use.
1 Lift the lid like in the figure (milk carafe).
2 Pour the milk into the carafe. The milk level must be between the minimum (MIN) and the maximum (MAX) notches on the carafe. Replace the lid.
Inserting the milk carafe
Remove the water dispensing spout (if installed): 1 Press the two side buttons to unlock the dispensing spout (1) and lift it slightly.
Pull the water dispensing spout to remove it (2).
2 Position the milk carafe’s dispensing spout in the “I” position.
English 21
3 Tilt it slightly and slide it completely into the machine’s guides until it hooks onto the drip tray.
Note: do not force the carafe while inserting it.
START QUICK MILK CLEAN?
5:00 min
to start press
my favourites
HOME
clean/setting
START/STOP
Removing the milk carafe
Rotate the carafe upwards until it is naturally released from the insert in the drip tray. Then remove it.
Dispensing frothed milk-based coffee beverages
Tip: Preheat the cups with hot water to enjoy a hotter beverage.
Tip: use cold milk (at a temperature of around 5 °C) with a protein content of at least 3% to ensure optimum results for the froth. You can use either whole milk or semi-skimmed milk. You can also use skimmed milk, soy milk or lactose-free milk.
1Press the HOME button and choose the desired beverage from the menu.
– Press the button for the beverage desired and place a suitable cup or glass beneath the coffee dispensing spout and the carafe dispensing spout.
– Press the START/STOP button to start brewing the selected beverage.
2The machine will dispense a predefined amount of frothed milk into the cup or glass. The coffee or the frothed milk may be dispensed first, depending on the beverage selected.
If you wish to customise the beverage before dispensing, refer to the “Beverage customisation” chapter.
3After dispensing your frothed milk-based coffee beverages, it is best to
complete the quick cleaning procedure of the carafe within 10 seconds.
However, the procedure can also be carried out at a later time by opening the
cleaning menu via the CLEAN/SETTING
button. Follow the instructions
shown on the display. The cleaning procedure can be carried out with milk in
the carafe.
Note: We recommend cleaning the machine via the quick clean procedure at least once a day.
Press the START/STOP button to confirm, or ” ” to carry out the procedure at a later time.
22 English
Dispensing Hot Water
Warning: when the machine starts preparing hot water, the hot water dispensing spout may spray steam and hot water. Wait until the end of the preparation before removing the hot water dispensing spout.
1Insert the hot water dispensing spout.
ESPRESSO
COFFEE
CAPPUCCINO
LATTE MACCHIATO
ESPRESSO LUNGO
AMERICANO
CAFÈ AU LAIT
ACQUA CALDA
2Press the HOME button and browse the various screens using the green ” ” and ” ” and select “HOT WATER”.
Warning: only select ” HOT WATER ” from the HOME screen when the hot water dispensing spout is installed.
3Press the ” HOT WATER ” button. Finally, press the START/STOP commence dispensing.
button to
Note: you can interrupt the brewing at any time by pressing the START/STOP button.
If you wish to customise the volume of water before you begin, please refer to the “Beverage customisation” chapter.
COFFEE 30 ml
TEMP medium
ESPRESSO
ESPRESSO
COFFEE 30 ml
COFFEE 30 ml
TEMP medium
ESPRESSO
COFFEE 30 ml
TEMP medium
ESPRESSO
COFFEE 30 ml
TEMP medium
ESPRESSO
English 23
Beverage Customisation and Profile Creation
This machine makes it possible to modify the settings of a beverage according to your preferences and save it to one of four available profiles.
Customisation
1 Press the HOME button.
2 Select your beverage.
3 All the settings that can be adjusted and/or selected are displayed on the screen. Based on the type of beverage, you can adjust and/or select: – the amount of coffee and milk;
– the temperature of the coffee;
– the dispensing of two cups at the same time;
– the use of pre-ground coffee;
– the intensity of the aroma (only when using coffee beans);
– the coffee boost function (only for over ice coffee).
4 Once the ” COFFEE
” or ” MILK
” button has been pressed, use
the green ” ” and ” ” buttons to select the desired amount.
Press ” ” to confirm and return to the previous screen, where the new
quantity will be displayed.
5 Press the ” TEMP
” button several times to adjust the temperature of the
beverage from among the following options:
– low;
– medium;
– high;
6 Press ” ” to prepare two cups, or ” ” to prepare a single cup. The picture of the beverage in the centre of the display will indicate the number of cups selected.
Note: this function is not available for beverages with milk, AMERICANO and HOT WATER.
7 Press the ” ” button to activate the use of pre-ground coffee.
Note: this function only allows the dispensing of one coffee at a time.
24 English
1 2 3 4 5
COFFEE 30 ml OVER ICE
ON/OFF
my favourites
HOME
clean/setting
COFFEE 30 ml
TEMP medium
ESPRESSO
8 To adjust the aroma intensity, press ”
“. Each time you press the
button, the aroma intensity changes by one degree. The display shows the
chosen intensity.
1Very light
2 Light
3 Normal
4 Strong
5 Very strong
Note: this function is not available for pre-ground coffee.
9 With over ice coffee you can select the coffee boost function ” “. The machine will carry out a double grinding to make the flavor of the coffee more intense.
Note: this function allows you to brew only one coffee at a time. It cannot be used with pre-ground coffee and does not allow you to change the intensity of the aroma.
10 Once the drink has been customised, you can save it in a specific profile by pressing the ” ” button.
11 Choose the profile where you wish to save the beverage from the 4 available.
ON/OFF
my favourites
HOME
clean/setting
CHOOSE YOUR PROFILE
Creating a profile
There are two ways to create a profile:
– Using the HOME button, as described in the “Beverage customisation” chapter, points 9 and 10;
– Using the MY FAVOURITES button, as follows:
1 Press the MY FAVOURITES button. 2 Select your preferred profile colour.
ADD DRINK
COFFEE 30 ml
TEMP medium
ESPRESSO
3 Press the ” ADD DRINK ” button.
4 The beverage screens will be displayed. Select the beverage that you want to save to your profile and customise it by following steps 3 to 8 in the “Beverage customisation” chapter.
5 Press ” ” to save the customised beverage to your profile. At this point,
you can dispense the beverage or exit the menu by pressing one of the ESC
buttons (HOME , MY FAVOURITES , CLEAN/SETTING
).
ESPRESSO
ADD DRINK
English 25
The saved beverage is now present in the list of your preferences and marked with a small heart in the same colour as the selected profile.
CHOOSE YOUR PROFILE
EDIT
DELET
Note: Once used, the ” ” profile icon will change colour.
6 The beverage saved in the profile can be modified using the ” EDIT ” button, or deleted using the ” DELETE ” button.
Note: It is not possible to save the beverage from the HOME menu via the MY FAVOURITES button. Instead, use the ” ” button, otherwise you will lose the settings you have just applied.
Coffee Grind Settings
You can adjust the grind setting using the grinder adjustment knob on the coffee bean container. The ceramic coffee grinder guarantees perfect, even grinding for the preparation of every cup of coffee. The aroma is thus preserved, ensuring the perfect flavour every time.
Note: you can only adjust the grind setting while the machine is grinding the coffee beans. The difference in flavour will be noticeable after 2-3 cups of coffee have been brewed.
Warning: to avoid damaging the coffee grinder, do not rotate the grinder adjustment knob more than one notch at a time.
1 Place a cup under the coffee dispensing spout.
2 Remove the lid of the coffee bean container.
3 Prepare an espresso as described in the “Brewing coffee from coffee beans” chapter.
4 While the machine is grinding the coffee, place the end of the handle of the pre-ground coffee measuring scoop on the coffee grinder adjustment knob, located in the coffee bean container. Use the handle of the measuring scoop to press and rotate the knob to the left or right, one notch at a time.
10
5 You can select from 10 grinding settings, from fine to course. The smaller the notch, the stronger and richer the coffee.
Note: – Coarse grind: lighter taste, for dark roasted coffee blends (5-10); – Fine grind: stronger taste, for light roasted coffee blends (1-5);
26 English
Cleaning and Maintenance
Regular cleaning and maintenance keep the machine in perfect condition and ensure perfect coffee flavour, a constant coffee flow and excellent milk froth. Please refer to the following table to know when and how to clean the removable parts of the machine. For more detailed information, please read the relevant chapters.
Cleaning table
Part description
When to clean
How to clean the cycle
Milk carafe
After use
After preparing a milk-based beverage, start the ” QUICK CLEAN ” process as indicated on the machine.
Daily
Clean the milk container and the milk suction tube as described in the “Cleaning the milk carafe
under running water” chapter, following the first 4 points and point 11.
Weekly
Disassemble the milk carafe and clean all its parts under running water.
Monthly
Start the ” DEEP CLEANING ” process as indicated on the machine. For this cleaning cycle,
use the Philips “Milk circuit cleaner” to clean the milk circuits.
Brew group
Weekly
Remove the brew group and clean it under running water.
Depending on usage
See the “Cleaning and lubricating the brew group” chapter.
Monthly
Clean the brew group with the Gaggia coffee oil remover to remove any oily coffee residue
Drip tray full
When the red indicator emerges Empty the drip tray and clean it under running
from the grid of the drip tray
water.
Drip tray grid
Depending on usage
Clean it under running water. Do not wash it in the dishwasher.
Coffee pucks container
Whenever the machine requires it
Empty the coffee pucks container and clean it under running water. Ensure that the machine is switched on during this procedure, or the coffee pucks container will not reset.
Water tank
Weekly
Clean it under running water.
Part description
Pre-ground coffee compartment/coffee outlet duct
When to clean Weekly
English 27
How to clean the cycle Clean the upper part using the handle of a spoon, as shown below.
Espresso tray
Depending on usage
Remove the espresso tray and clean it with running water. It can also be washed in the upper tray of a dishwasher.
Cleaning the milk carafe
Milk carafe cleaning programmes
The machine has two programmes for cleaning the milk carafe: quick clean and deep clean. Both programmes can be selected using the CLEAN/SETTING button then pressing the ” CLEAN ” button. Quick clean is also proposed after dispensing a milk-based beverage. For both programmes, follow the instructions shown on the display.
– Quick clean programme
The quick clean programme includes the cleaning of the milk dispensing spout. The cleaning procedure can be carried out with milk in the carafe.
– Deep clean programme for the carafe
The deep clean programme for the carafe includes the careful cleaning of the whole milk circuit using the Philips “Milk circuit cleaner” product.
28 English
Accurate cleaning of the milk carafe under running water
To carefully clean the milk carafe, you must disassemble it completely and wash it under running water, following these steps:
. 1 Press the release buttons to remove the lid (fig. 23).
2 Rotate the milk carafe’s dispensing spout to the ” ” position (fig. 24). 3 Lift the milk dispensing spout from the lid (fig. 25). 4 Remove the milk suction tube (fig. 26). 5 Press the button indicated by an arrow to unblock the cover of the milk
dispensing spout (fig. 27). 6 To remove the cover, press lightly on the sides of the dispenser and pull the
cover upwards to remove it from the dispenser (fig. 28). 7 Remove the ring from the milk carafe dispenser (fig. 29). 8 Pull the milk froth unit upwards (fig. 30). 9 Pull the support away from the milk froth unit (fig. 31). 10 Pull the support outwards and separate it from the remaining part (fig. 32). 11 Clean all parts with warm water. 12 Reassemble all the parts in the reverse order.
Cleaning the brew group
Warning: do not wash the brew group in the dishwasher and do not use dishwashing detergents, since they may cause the malfunctioning of the brew group and alter the coffee flavour.
Removing the brew group
1 Turn off the machine and disconnect the power cord. 2 Remove the coffee pucks container and open the service door. 3 Remove the coffee residues drawer.
1 2
English 29
4 Press the PUSH lever (1) and pull the handle of the brew group (2) to remove it from the machine.
Cleaning the brew group under running water
1 Clean the coffee outlet duct thoroughly with a spoon handle or with another round-tipped kitchen utensil.
2 Thoroughly rinse the brew group using lukewarm water. Carefully wash the upper filter.
3 Let the brew group air dry. Note: to avoid the build-up of fibres in its interior, do not dry the brew group with cloth.
Cleaning the brew group with coffee cleaning tablets
Warning: use only Gaggia tablets for removing oily coffee residue. 1 Place a container under the coffee dispensing spout.
QUICK MILK CLEAN
DEEP MILK CLEAN
DESCLING
BREW GROUP CLEAN
2 Press the CLEAN/SETTING on the display.
button and select the ” CLEAN ” button shown
3 Select ” BREW GROUP CLEANING ” and press the START/STOP launch the cleaning procedure.
button to
4 Follow the instructions shown on the display to correctly clean the brew group.
5 The procedure will take approximately 5 minutes. The START/STOP button can be used to suspend and then resume the procedure.
30 English
Reinserting the brew group
1 Before reinserting the brew group into the machine, ensure that the two yellow reference indicators on the side coincide. If this is not the case, perform the following step:
Make sure that the lever is in contact with the base of the brew group.
2 Make sure that the yellow locking hook of the brew group is in the right position.
To correctly position the hook, push it upwards to the highest possible position.
If the hook is still in the lower position, this means it has not been correctly positioned.
3 Reinsert the brew group in the machine along the side guides until it locks in the right position with a click.
Warning: do not press the PUSH lever. 4 Close the service door.
English 31
Lubricating the brew group
In order to ensure the perfect performance of the machine, it is necessary to lubricate the brew group. Refer to the following table for the frequency of lubrication.
Frequency of use
Low Regular
High
Number of beverages prepared daily 1-5 6-10 >10
Frequency of lubrication
Every 4 months Every 2 months
Every month
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water (see the “Cleaning the brew group under running water” chapter).
3 Apply a thin layer of the lubricant provided around the inserting pin on the lower part of the brew group.
4 Apply a thin layer of lubricant to the guides, on both sides (see figure). 5 Reinsert the brew group (see the “Reinserting the brew group” chapter).
Note: you can use the lubricant tube multiple times.
32 English
Descaling
Descaling procedure
Descaling needs to be carried out when the machine signals it.
Use only the Gaggia descaling solution designed to guarantee the machine’s excellent performance. The use of other products could damage the machine and leave residue in the water. Failure to descale the machine will void the warranty.
QUICK MILK CLEAN
DEEP MILK CLEAN
1 Press the CLEAN/SETTING on the display.
button and select the ” CLEAN ” button shown
– Press the ” DESCALING ” button, then press the START/STOP button.
DESCLING
BREW GROUP CLEAN
2 Remove the drip tray and the coffee pucks container, empty them, and insert them in the machine again.
3 Remove the water tank and empty it. Remove the INTENZA+ filter, if present.
4 Empty the entire bottle of Gaggia descaling solution into the water tank and fill the tank with water up to the CALC CLEAN notch. Reinsert it in the machine.
CLEAN CALC
5 Fill the milk carafe halfway with water and insert it in the machine. 6 Follow the instructions shown on the display to launch the descaling
procedure. This procedure lasts approximately 25 minutes and consists of a descaling cycle and a rinse cycle, carried out with dispensing at regular intervals. 7 Once the descaling cycle is complete, rinse the water tank, carafe and water circuit, following the instructions shown on the display. 8 Replace the INTENZA+ filter into the water tank.
Note: it is possible to pause and resume the procedure at any time by pressing the START/STOP button.
Warning: when the descaling procedure is active, the brew group cannot be removed. Wait for the descaling process to end, then remove the brew group.
English 33
What to do if the descaling process is interrupted
You can exit the descaling procedure by pressing the ON/OFF button on the control panel. If the descaling procedure is interrupted before its completion, proceed as follows:
1 Empty the water tank and wash it thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN notch and switch
the machine on again. The machine will warm up and perform an automatic rinse cycle. 3 Before preparing any beverage, perform a manual rinsing cycle as described in the specific chapter.
Note: if the procedure has not been completed, it will be necessary to carry out another descaling procedure as soon as possible.
Various Settings
By pressing the CLEAN/SETTING
button and selecting ” SETTINGS ” on the
display, it is possible to reset or modify several machine parameters including:
– Language
– Water filter
– Timer stand-by
– Water hardness
– Measurement units
– Beverage counter
– Restore factory settings
Language
When the language setting icon is selected, the list of available languages will be displayed.
Languages available ITALIAN ENGLISH GERMAN FRENCH SPANISH
PORTUGUESE
DUTCH DANISH GREEK POLISH RUSSIAN ROMANIAN
HUNGARIAN BULGARIAN
CZECH SLOVAK LITHUANIAN CHINESE (TRADITIONAL)
34 English
LANGUAGE
WATER FILTER
TIMER STAND-BY
UNITS
Water filter
When ” WATER FILTER ” is selected, follow the instructions on the display and those described under the “Installing the INTENZA+ water filter” and “Replacing the INTENZA+ water filter” chapters.
LANGUAGE
WATER FILTER
TIMER STAND-BY
UNITS
Timer stand-by
When ” TIMER STAND-BY ” is selected, the timer can be set to:
– 15 min – 30 min – 60 min – 180 min
Water hardness
With ” WATER HARDNESS ” selected, follow the instructions on the display and those described under the “Measuring water hardness” chapter.
LANGUAGE
WATER FILTER
TIMER STAND-BY
UNITS
Measurement units
By selecting ” MEASUREMENT UNITS “:
it is possible to set the measurement units to “ml” or “oz”.
Beverage counter
It is possible to display the number of cups of each beverage that have been dispensed since the first operation of the machine. These numbers cannot be reset.
Restore factory settings
It is possible to restore the machine to the default factory settings. The machine will require a secondary confirmation before proceeding. All the parameters will be reset except those relating to the profiles (MY FAVOURITES ) and the beverage counter.
English 35
Error Code Key
The list below reports the error codes that the display can show, their meanings
and how to solve the problem. If the indicated solutions are ineffective (the display
keeps showing the error code icon and the machine does not function correctly), or
if further error codes are displayed, please contact an authorised service centre or
x x
a distributor center or yur local vendor.
The contact info is listed on www.gaggia.com and www.gaggia.it.
Error code 01 03 – 04
05
14
Problem
Cause
Possible solution
The coffee grinder is clogged.
The coffee outlet duct is clogged.
Remove the power cord and remove the brew group. Clean the coffee outlet duct thoroughly using a spoon handle. Switch the appliance on again.
A problem occurred in the The brew group is dirty
brew group.
or not well lubricated.
Switch off the machine using the power button. Remove the brew group and clean it thoroughly. (Refer to the “Cleaning the Brew Group” chapter)
The brew group is not positioned correctly.
Switch off the machine using the power button. Remove the brew group and reinsert it. Ensure that the brew group is in the correct position before inserting it. Refer to the “Reinserting the brew group” chapter.
A problem occurred in the There is air in the water
water circuit.
circuit.
Remove and reinsert the tank in the machine a couple of times. Make sure you insert the tank correctly in the machine. Check that the water tank seat is clean.
If you use an “INTENZA+” filter: pull out the filter from the water tank and shake it to remove all air from the filter. Then reinsert the “INTENZA+” filter into the water tank.
The machine is overheated.
There may be multiple causes.
Switch off the machine and switch it on again after 30 minutes. Perform this operation 2 or 3 times.
36 English
Troubleshooting
This chapter summarises the most common problems you may encounter while using the machine. If you are unable to resolve the problem using the information given below, visit the FAQ sections on www.gaggia.com or www.gaggia.it or contact the Customer Service Centre in your country.
Problem
The machine does not switch on.
Cause The machine is not connected.
Solution
Check that the power cord has been inserted correctly.
The drip tray fills quickly. This is normal. The machine uses water to rinse the internal circuit and the brew group. Part of the water flows through the internal system directly into the drip tray.
Empty the drip tray when the red indicator emerges from the grid of the drip tray. Tip: Place a cup under the dispensing spout to gather the rinse water.
The display continuously shows the “coffee pucks container full” icon.
The coffee pucks container has been emptied when the machine was off.
Always empty the coffee pucks container when the machine is on. If you empty the coffee pucks container when the machine is off, the coffee cycle counter does not reset. In this case, the display shows the icon even if the container is not full.
The coffee pucks container has been put back too quickly.
Always wait about 5 seconds when you replace the coffee pucks container. This way, the counter will reset to zero.
The machine says to empty the coffee pucks container even if the container is not full.
The machine has not reset the counter last time the coffee pucks container has been emptied.
Always wait about 5 seconds when you replace the coffee pucks container. This way, the coffee grounds counter will reset to zero.
Always empty the coffee pucks container when the machine is on. If you empty the coffee pucks container when the machine is off, the coffee cycle counter does not reset.
Impossible to remove the brew group.
The brew group is not in the correct Close the service door. Switch the machine off
position.
and then back on. Wait for the display to show
the ready message, then remove the brew
group.
The coffee pucks container has not Remove the coffee pucks container before
been removed.
removing the brew group.
English 37
Problem
The brew group cannot be inserted.
Cause
Solution
The brew group is not in the correct The brew group has not been positioned
position.
correctly before being placed back. Ensure that
the lever is in contact with the base of the brew
group and that the hook of the brew group is
in its correct position. See the “Reinserting the
brew group” chapter.
To reset the machine: put the coffee pucks container back in place. Do not insert the brew group. Close the service door with the coffee pucks container inserted, then unplug and plug in the power cord. Then try to reinsert the brew group and switch on the machine.
The espresso does not The coffee grinder is set to a
Adjust the coffee grinder to a finer setting.
have enough crema or it coarse grinding.
is watery.
The machine is performing the self- Dispense several cups of coffee so that the
adjustment.
machine regulates itself automatically.
The coffee outlet duct is clogged.
Clean the coffee outlet duct with a spoon as described in the “Cleaning the brew group under running water” chapter.
The coffee dispensed is The set temperature is too low.
not hot enough.
Check the menu settings.
Set the menu temperature to “MAX”.
The machine grinds the The coffee grinder is set to a too coffee beans, but the fine grinding. coffee is not dispensed.
Adjust the coffee grinder to a coarser setting.
The coffee dispensing spout is blocked.
Dispense a long coffee from pre-ground coffee but without actually adding pre-ground coffee.
The nozzles of the coffee dispensing spout are blocked.
Clean the nozzles of the coffee dispensing spout with a small bottlebrush.
Coffee is dispensed slowly or by drips.
The coffee grinder is set to a too fine grinding.
Adjust the coffee grinder to a coarser setting.
The nozzles of the coffee dispensing spout are blocked.
Clean the nozzles of the coffee dispensing spout with a small bottlebrush.
The machine circuit is clogged by Descale the machine. limescale.
The milk does not froth.
The milk dispensing spout is dirty or the carafe has not been inserted correctly, or the milk carafe has not been assembled with all its parts.
Clean the carafe according to the “Accurate cleaning of the milk carafe under running water” chapter and ensure that it is positioned and inserted correctly.
Ensure that all components have been correctly assembled.
The type of milk used is not suitable for foaming.
The amount and the quality of froth vary depending on the type of milk.
38 English
Problem The “INTENZA+” filter cannot be inserted.
There is some water under the machine.
Cause Remove the air from the filter.
The tank still contains some water.
The rubber seal is not inserted on the “INTENZA+” filter.
The drip tray is too full and has spilled over.
Solution Let the air bubbles flow out of the filter.
Empty the water tank before installing the filter.
Check the packaging and insert the seal on the “INTENZA+” filter.
Empty the drip tray when red indicator emerges from the grid of the drip tray. Always empty the drip tray before starting the descaling procedure.
GAGGIA Accessories
Coffee and accessories are available through authorised centres (Italy), or distributors in your country.
Descaling product
INTENZA+ water filter
Coffee oil remover
Milk circuit cleaner (Philips)
Range of coffee available in beans and pre-ground: 100% Arabica / Intense / Decaffeinated
English 39
Technical Specifications
Nominal voltage – Power rating Power supply Housing material Dimensions Weight Power cord length Control panel Cup size Water tank Coffee bean container capacity Coffee pucks container capacity Pump pressure Boiler Safety devices
See data plate on the inside of the service door Thermoplastic type 260 x 380 x 440 mm 7.5 kg 1200 mm Front panel Up to 150 mm 1.8 litres – Removable type 250 g 10 15 bar Stainless steel boiler Thermal Fuse
Documents / Resources
 |
GAGGIA EG5603 Automatic Espresso Machine [pdf] Instruction Manual EG5603 Automatic Espresso Machine, EG5603, Automatic Espresso Machine, Espresso Machine, Machine |