GadgetHyper Direwolf 3 Gaming Controller
Connect to the Computer
Wireless dongle connection
- Plug the dongle into the computer’s USB port
- Switch the mode gear to
- press the
button, the controller will be connected automatically, and the indicator light keep in white - The next time you use it, press the button once, and the controller will be connected automatically
Wired connection
Connect the computer and the controller through the USB cable, and the indicator light keep in white, which indicates the connection is successful
BT connection
Switch the mode gear to
, press the button to wake up the controller, and connect Xbox Wireless Controller in the computer’s BT settings
Connect to Switch
- Click the controller icon on the Switch homepage to enter [Change grip/order]
- Switch the mode gear to NS
- Press the button, the controller will be connected automatically, and the indicator light keeps in blue
- The next time you use it, press the button once and the controller will automatically connect
In Switch mode, the key and key-value mapping relationship is as follows
Connect to an Android/iOS device
- Switch the mode gear to
- Press thebutton once to wake up the controller
- Turn on the device’s Bluetooth, connect to Xbox Wireless Controller, and the controller indicator light keeps in white
- The next time you use it, press the button once and the controller will automatically connect
More Customizable Settings in the Flydigi Space Station
Visit our official website www.flydigi.com to download “Flydigi Space Station”. You can customize buttons, macros, motion sensing, joystick and other functions.
Flydigi Space Station
Button mapping
- Button can be mapped as the controller button, mouse and keyboard button
Macro definition
- You can set up Tubo, record joystick and button input, and simplify tedious operations
Gyro mapping
- Gyro can be mapped to a joystick/mouse, making shooting games more accurate
Adjustable Joystick Settings
- Set the dead zone and sensitivity curve
Keybinding Turbo/ Marco
Direwolf 3/3Pro, turbo and marco functions can be set through key combinations.
Please scan the QR code on the homepage for specific setup methods.
Basic operations
- Power on: Press the button once
- Power off: switch back gear; The controller will automatically turn off if inactive for 15 minutes.
- Low Power: The indicator light flashes red
- Charging when the power is off: the indicator light keeps in red
- Fully charged when powered off: the indicator light keeps in green
Specification
Note: Most games on PC support XInput mode, but some older games may only support DirectInput mode.
- Wireless RF: BT 5.0
- Service distance: less than 10 meters
- Battery information: rechargeable lithium-ion battery, battery capacity 800mAh, charging time 2 hours, charging voltage 5V, charging current 800mA
- Operating current: less than 40mA when in use, less than 10µA in standby
- Temperature range: use and storage at -10 °C~50 °С
Appearance
The name and content of harmful substances in the product
This form has been prepared in accordance with the provisions of SJ/T 11364
Indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit specified in GB/T 26572-2011 Require the following
Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the provisions of GB/T 26572-2011 the limited requirements
FCC Statement
FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.\ This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Scan QR code to read the user manual
FAQs
- Q: Any delays or disconnections occurs when the dongle is connected to the computer
- A: The issue is generally caused by signal interference. It is recommended to add a USB extension cable between the dongle and the computer. For more details, please consult customer service
- Q: How to upgrade the controller firmware?
- A: Install the Flydigi Space Station on a computer, or install the Flydigi Game Hall on mobile phone, and upgrade the firmware according to the software boot
- Q: Any abnormalities in the joystick/trigger/motion sensing?
- A: Install the Flydigi Space Station on computer, enter the test page, adjust the controller under the guidance
Documents / Resources
 |
GadgetHyper Direwolf 3 Gaming Controller [pdf] User Manual Direwolf 3 Gaming Controller, 3 Gaming Controller, Gaming Controller, Controller |