PRORECK Stage Pro 12 PA Speaker System Instruction Manual

Réamhrá

Thank you for choosing the PRORECK Stage Pro 12 PA Speaker System. This powerful audio system is designed to deliver exceptional sound quality for various events, including DJ performances, weddings, meetings, and live events. With its 8000W peak power, dual 12" subwoofers, four line array speakers, and versatile DSP presets, the Stage Pro 12 offers a comprehensive solution for your audio needs. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your system.

I measc na bpríomhghnéithe tá:

• 8000W Powerful Sound System: Experience unmatched audio performance with 8000W peak power and 1200W RMS for crystal-clear, high-quality sound.
• 4x Line Array Speakers + 2x 12" Subwoofer: Provides a perfect balance of crisp highs, rich mids, and deep bass.
• 3 DSP Presets: Optimize audio output with STANDARD, DJ, and LIVE presets for different occasions.
• TWS Bluetooth for Wireless Connectivity: Stream music wirelessly and connect two Stage Pro 12 speakers for enhanced stereo sound.
• Versatile and Professional-Grade: Ideal for DJs, musicians, and event organizers.

Eolas Sábháilteachta

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Foinse Cumhachta: Connect the system only to a power supply of the type described in this manual or marked on the unit. Ensure the voltage switch is set correctly for your region (AC 120V or AC 240V).
• Aeráil: Ná bac aon oscailtí aerála. Suiteáil de réir threoracha an mhonaróra.
• Uisce agus Taise: Ná nochtaigh an gléas seo don bháisteach ná don taise. Ná húsáid in aice le huisce.
• Teas: Ná suiteáil in aice le haon fhoinsí teasa cosúil le radaitheoirí, cláir teasa, soirn, nó gaireas eile (lena n-áirítear ampleachtaitheoirí) a tháirgeann teas.
• Bunús: This product must be grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
• Ag seirbhísiú: Ná déan iarracht an táirge seo a sheirbheáil ort féin. Déan gach seirbhísiú a tharchur chuig pearsanra seirbhíse cáilithe.
• Láimhseáil: Use caution when moving the system to prevent injury or damage.

Cad atá sa Bhosca

Upon unpacking, please verify that all components listed below are present and in good condition. If any items are missing or damaged, contact PRORECK customer support immediately.

Image: All components of the PRORECK Stage Pro 12 system, including the two 12-inch subwoofers, four line array speakers, power cable, and speaker cables.

• 2 x 12" Subwoofer Units
• 4 x Line Array Speaker Units
• 1 x Cábla Cumhachta
• Speaker Cables (for connecting line array speakers to subwoofers and subwoofers to each other)

Note: The system is typically shipped in three separate packages.

Image: The three distinct packages (Stage Pro 12Y, 12W, 12X) in which the PRORECK Stage Pro 12 system is shipped.

Táirge Tharview: Painéal rialú

Familiarize yourself with the control panel located on the rear of the subwoofer unit. Understanding these controls is crucial for proper operation.

Íomhá: Dlúthghraf view of the main control panel on the PRORECK Stage Pro 12 subwoofer, showing all inputs, outputs, and control knobs with corresponding labels.

1. FO-LEIBHÉAL: Adjusts the output volume of the subwoofer.
2. SATELLITE LEVEL: Adjusts the output volume of the line array speakers.
3. XLR/TRS COMBO INPUT: Input for audio sources using XLR or 1/4" TRS cables (Left and Right channels).
4. XLR LINK OUTPUT: Output for linking to another speaker system or mixer.
5. DSP PRESETS: Selects between STANDARD, DJ, and LIVE sound modes.
6. BLUETOOTH/TWS SWITCH: Activates Bluetooth pairing mode or True Wireless Stereo (TWS) linking.
7. SATELLITE POWER OUTPUT: Connects to the line array speakers.
8. ASCHUR FO-BHÓTHAR: Connects to the second subwoofer unit.
9. VOLTAGE SWITCH: Selects between AC 120V and AC 240V power input. Ensure this matches your local power supply.
10. SWITCH CUMHACHT: Turns the system ON or OFF.
11. MAIN POWER INPUT: Connects the system to the main power supply using the provided power cable.

Socrú

1. Tionól an Chórais

The PRORECK Stage Pro 12 system is designed for easy assembly. Follow these steps to set up your speakers:

• Place the two 12" subwoofer units on a stable, flat surface. The bottom subwoofer should be placed first, followed by the second subwoofer stacked directly on top.
• Carefully place the four line array speaker units on top of the upper subwoofer. Ensure they are securely connected using the integrated connecting pieces for stability.

Image: The complete PRORECK Stage Pro 12 system fully assembled, showing the two subwoofers at the base and the four line array speakers stacked vertically above them.

2. Naisc Leictreacha

• Ceangal Cumhachta: Before connecting to power, ensure the VOLTAGE LASCADH (9) on the control panel is set to match your local power supply (AC 120V or AC 240V). Connect the provided power cable to the IONCHUR PRÍOMHCHUMHACHT (11) on the subwoofer and then to a grounded electrical outlet.
• Ceangal Subwoofer: Use a speaker cable to connect the TORADH SUBWOOFER (8) of the primary subwoofer to the input of the second subwoofer unit.
• Line Array Speaker Connection: Connect the line array speakers to the SATELLITE POWER OUTPUT (7) on the primary subwoofer using the appropriate speaker cables. Ensure all four line array speakers are daisy-chained or connected as per the system's design.

Image: The rear panel of the PRORECK Stage Pro 12 system, illustrating the correct cable connections for power, linking subwoofers, and connecting the line array speakers.

3. Ceangal Foinse Fuaime

• Connect your audio source (mixer, microphone, instrument, etc.) to the XLR/TRS COMBO INPUT (3) on the control panel. Use either XLR or 1/4" TRS cables.
• For linking to another speaker system or recording device, use the XLR LINK OUTPUT (4).

Treoracha Oibriúcháin

1. Cumhacht Ar / As

• Cinntigh go bhfuil gach nasc slán sula gcumhdaítear é.
• Cas an FO-LEIBHÉAL (1) agus LEIBHÉAL SATAILÍT (2) knobs to their minimum positions.
• Smeach an SWITCH CUMHACHTA (10) to the "ON" position. The power indicator light will illuminate.
• To power off, turn the level knobs to minimum, then flip the SWITCH CUMHACHTA (10) to "OFF".

2. Leibhéil Toirte a Choigeartú

• Bain úsáid as an FO-LEIBHÉAL (1) knob to control the volume of the subwoofer.
• Bain úsáid as an LEIBHÉAL SATAILÍT (2) knob to control the volume of the line array speakers.
• Adjust both levels to achieve a balanced sound for your environment.

3. DSP Presets

An S.tage Pro 12 features three Digital Signal Processing (DSP) presets to optimize sound for different applications:

• CAIGHDEÁN: General purpose setting for balanced audio reproduction.
• DJ: Enhanced bass and treble for music playback, ideal for parties and events.
• BEO: Optimized for live vocals and instruments, providing clarity and presence.

Bain úsáid as an Réamhshocruithe DSP (5) switch to cycle through these modes and select the one best suited for your current use.

4. Bluetooth and TWS Connectivity

• Péireáil Bluetooth: Smeach an BLUETOOTH/TWS SWITCH (6) to the Bluetooth position. The Bluetooth indicator light will flash, indicating it's ready for pairing. On your smartphone, tablet, or laptop, search for "PRORECK Stage Pro 12" in your Bluetooth settings and connect. Once paired, the light will become solid.
• Fíor Steirió Gan Sreang (TWS): To connect two Stage Pro 12 systems for stereo sound, ensure both units are powered on and in Bluetooth mode. On one unit, press and hold the BLUETOOTH/TWS SWITCH (6) until the TWS indicator light flashes. The two units will automatically pair, and audio will be split into left and right channels for a wider soundstage.

Cothabháil

Proper maintenance ensures the longevity and optimal performance of your PRORECK Stage Pro 12 system.

• Glanadh: Use a soft, dry cloth to clean the exterior surfaces of the speakers. Do not use abrasive cleaners, waxes, or solvents. For stubborn dirt, a slightly damp is féidir éadach a úsáid, agus éadach tirim ina dhiaidh sin.
• Aeráil: Seiceáil go rialta go bhfuil na hoscailtí aerála saor ó dheannach agus smionagar chun róthéamh a chosc.
• Stóráil: When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage and transport.
• Cúram Cábla: Inspect all cables regularly for signs of wear or damage. Replace any damaged cables immediately to prevent electrical hazards or signal loss.

Fabhtcheartú

If you encounter issues with your PRORECK Stage Pro 12 system, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact PRORECK customer support for further assistance.

Sonraíochtaí

Detailed technical specifications for the PRORECK Stage Pro 12 PA Speaker System:

Image: Detailed dimensional drawing of the PRORECK Stage Pro 12 system, providing measurements for the overall height, and individual dimensions for the subwoofers and line array speakers.

Bharántas

The PRORECK Stage Pro 12 PA Speaker System comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.

Tacaíocht

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact PRORECK customer support. You can find more information and contact details on the official PRORECK website or through the PRORECK Store on Amazon.

Tabhair cuairt ar an PRORECK Store le haghaidh tuilleadh eolais faoi tháirgí agus acmhainní tacaíochta.